Hi Roland,

On Mon, Apr 16, 2018 at 01:19:39PM +0300, Baruch Siach wrote:
> Hi Roland,
> 
> On Mon, Apr 16, 2018 at 09:52:14AM +0000, Mainz, Roland wrote:
> > Two small questions about drivers/mfd/mc34704.c in the barebox codebase:
> > 1. mc34704 has an ACCURATE bit (I2CSET1, see 
> > https://www.nxp.com/docs/en/data-sheet/MC34704.pdf) which requires that all 
> > read/write commands are send twice - does the barebox code have any support 
> > for that in the current versions ?
> > 2. Is this "accurate I²C communication mode" enabled by that bit a 
> > vendor-specific protocol extension or is it part of the I²C standard ?

I never heard of "accurate I²C", it must be something the chip designers
have invented. Also there is no support for it neither in the mc34704
driver nor in the generic I²C support.

Sascha

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

Reply via email to