Signed-off-by: Andrey Smirnov <andrew.smir...@gmail.com>
---
 arch/arm/mach-imx/include/mach/xload.h |  1 +
 arch/arm/mach-imx/xload-esdhc.c        | 33 ++++++++++++++++++++++++++
 2 files changed, 34 insertions(+)

diff --git a/arch/arm/mach-imx/include/mach/xload.h 
b/arch/arm/mach-imx/include/mach/xload.h
index 4e38ac7e2..8f141bc37 100644
--- a/arch/arm/mach-imx/include/mach/xload.h
+++ b/arch/arm/mach-imx/include/mach/xload.h
@@ -5,6 +5,7 @@ int imx53_nand_start_image(void);
 int imx6_spi_load_image(int instance, unsigned int flash_offset, void *buf, 
int len);
 int imx6_spi_start_image(int instance);
 int imx6_esdhc_start_image(int instance);
+int imx8_esdhc_start_image(int instance);
 
 int imx_image_size(void);
 
diff --git a/arch/arm/mach-imx/xload-esdhc.c b/arch/arm/mach-imx/xload-esdhc.c
index 6ab4cabb7..08ba9b08d 100644
--- a/arch/arm/mach-imx/xload-esdhc.c
+++ b/arch/arm/mach-imx/xload-esdhc.c
@@ -15,6 +15,7 @@
 #include <io.h>
 #include <mci.h>
 #include <mach/imx6-regs.h>
+#include <mach/imx8mq-regs.h>
 #include <mach/xload.h>
 #include <linux/sizes.h>
 #include "../../../drivers/mci/sdhci.h"
@@ -292,3 +293,35 @@ int imx6_esdhc_start_image(int instance)
 
        return esdhc_start_image(&esdhc, 0x10000000, 0);
 }
+
+/**
+ * imx8_esdhc_start_image - Load and start an image from USDHC controller
+ * @instance: The USDHC controller instance (0..2)
+ *
+ * This uses esdhc_start_image() to load an image from SD/MMC.  It is
+ * assumed that the image is the currently running barebox image (This
+ * information is used to calculate the length of the image). The
+ * image is started afterwards.
+ *
+ * Return: If successful, this function does not return. A negative error
+ * code is returned when this function fails.
+ */
+int imx8_esdhc_start_image(int instance)
+{
+       struct esdhc esdhc;
+
+       switch (instance) {
+       case 0:
+               esdhc.regs = IOMEM(MX8MQ_USDHC1_BASE_ADDR);
+               break;
+       case 1:
+               esdhc.regs = IOMEM(MX8MQ_USDHC2_BASE_ADDR);
+               break;
+       default:
+               return -EINVAL;
+       }
+
+       esdhc.is_mx6 = 1;
+
+       return esdhc_start_image(&esdhc, MX8MQ_DDR_CSD1_BASE_ADDR, SZ_32K);
+}
\ No newline at end of file
-- 
2.17.0


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

Reply via email to