[PATCH 10/13] ARM: MXS: make VDDx brownout setup more understandable

[Roland Hieber]

Rename bo_int to prev_bo_enirq to make its purpose clearer, and throw in
a few comments for easier understanding.

Signed-off-by: Roland Hieber <r.hie...@pengutronix.de>
---
 arch/arm/mach-mxs/power-init.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/arch/arm/mach-mxs/power-init.c b/arch/arm/mach-mxs/power-init.c
index db597ef65c..060bd9115b 100644
--- a/arch/arm/mach-mxs/power-init.c
+++ b/arch/arm/mach-mxs/power-init.c
@@ -1066,7 +1066,7 @@ static void mxs_power_set_vddx(const struct mxs_vddx_cfg 
*cfg,
 {
        struct mxs_power_regs *power_regs =
                (struct mxs_power_regs *)IMX_POWER_BASE;
-       uint32_t cur_target, diff, bo_int = 0;
+       uint32_t cur_target, diff, prev_bo_enirq = 0;
        uint32_t powered_by_linreg = 0;
        int adjust_up, tmp;
 
@@ -1082,8 +1082,10 @@ static void mxs_power_set_vddx(const struct mxs_vddx_cfg 
*cfg,
                powered_by_linreg = cfg->powered_by_linreg();
 
        if (adjust_up && cfg->bo_irq) {
+               /* temporarily disable brownout to prevent it from taking
+                  effect prematurely during the adjustment */
                if (powered_by_linreg) {
-                       bo_int = readl(&power_regs->hw_power_ctrl);
+                       prev_bo_enirq = readl(&power_regs->hw_power_ctrl) & 
cfg->bo_enirq;
                        writel(cfg->bo_enirq, &power_regs->hw_power_ctrl_clr);
                }
                setbits_le32(cfg->reg, cfg->bo_offset_mask);
@@ -1124,8 +1126,10 @@ static void mxs_power_set_vddx(const struct mxs_vddx_cfg 
*cfg,
 
        if (cfg->bo_irq) {
                if (adjust_up && powered_by_linreg) {
+                       /* clear brownout IRQ flag in case it fired */
                        writel(cfg->bo_irq, &power_regs->hw_power_ctrl_clr);
-                       if (bo_int & cfg->bo_enirq)
+                       if (prev_bo_enirq)
+                               /* re-enable brownout IRQ after adjustment has 
finished */
                                writel(cfg->bo_enirq, 
&power_regs->hw_power_ctrl_set);
                }
 
-- 
2.18.0


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox