Following the Linux driver the controller should be stopped in the
read transfer path only after the last transfer of a message, but
not when other transfers of the same message are following. Implement
this behaviour for the barebox driver aswell.
Signed-off-by: Sascha Hauer <s.ha...@pengutronix.de>
---
drivers/i2c/busses/i2c-imx.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
index e169feb3fc..c903d8dfd1 100644
--- a/drivers/i2c/busses/i2c-imx.c
+++ b/drivers/i2c/busses/i2c-imx.c
@@ -469,7 +469,8 @@ static int i2c_fsl_write(struct i2c_adapter *adapter,
struct i2c_msg *msg)
return 0;
}
-static int i2c_fsl_read(struct i2c_adapter *adapter, struct i2c_msg *msg)
+static int i2c_fsl_read(struct i2c_adapter *adapter, struct i2c_msg *msg,
+ bool is_last)
{
struct fsl_i2c_struct *i2c_fsl = to_fsl_i2c_struct(adapter);
int i, result;
@@ -500,7 +501,7 @@ static int i2c_fsl_read(struct i2c_adapter *adapter, struct
i2c_msg *msg)
if (result)
return result;
- if (i == (msg->len - 1)) {
+ if (is_last && i == msg->len - 1) {
i2c_fsl_stop(adapter);
} else if (i == (msg->len - 2)) {
temp = fsl_i2c_read_reg(i2c_fsl, FSL_I2C_I2CR);
@@ -547,7 +548,7 @@ static int i2c_fsl_xfer(struct i2c_adapter *adapter,
/* write/read data */
if (msgs[i].flags & I2C_M_RD)
- result = i2c_fsl_read(adapter, &msgs[i]);
+ result = i2c_fsl_read(adapter, &msgs[i], i == num - 1);
else
result = i2c_fsl_write(adapter, &msgs[i]);
if (result)
--
2.20.1
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
