Hi Philipp,
I try what you said and it didn't work. Here are the logs:
----------------------
Bootstrap records written to /var/lib/bareos/DaVinci-dir.restore.4.bsr
The job will require the following
Volume(s) Storage(s) SD Device(s)
===========================================================================
Monthly-1-2014-2627 RAID
RAIDStorage
# cat /var/lib/bareos/DaVinci-dir.restore.4.bsr
Storage="RAID"
Volume="Monthly-1-2014-2627"
MediaType="File"
Device="RAIDStorage"
VolSessionId=33
VolSessionTime=1389643638
VolAddr=213-947737
FileIndex=1-1561
Count=1561
14-Jan 11:33 DaVinci-dir JobId 2628: Start Restore Job
RestoreFiles.2014-01-14_11.33.48_51
14-Jan 11:33 DaVinci-dir JobId 2628: Using Device "RAIDStorage" to read.
14-Jan 11:33 DaVinci-sd JobId 2628: Warning: acquire.c:226 Read open device
"RAIDStorage" (/mnt/Data/bareos) Volume "Monthly-1-2014-2627" failed:
ERR=dev.c:556 Could not open: /mnt/Data/bareos/Monthly-1-2014-2627, ERR=No
such file or directory
14-Jan 11:33 DaVinci-sd JobId 2628: Please mount read Volume
"Monthly-1-2014-2627" for:
Job: RestoreFiles.2014-01-14_11.33.48_51
Storage: "RAIDStorage" (/mnt/Data/bareos)
Pool: File
Media type: File
--------------------------------
It's the same thing after the cancel and 2nd restore.
As you can see, the Device is explicitly written in the Bootstrap file.
The way I see it, you should be able to write more than one Device in the
Storage definition of the Director.
In my case, the Storage "RAID" would have the Devices "RAIDStorage" (the
default) and "Offsite".
O.
On Tue, Jan 14, 2014 at 5:15 AM, Philipp Storz <[email protected]>wrote:
> Hello Olivier,
>
> if I remember right, I had a similar problem long ago when I did a
> disaster recovery with a live DVD.
>
> Intersting was, that the restore from a different device did not work the
> first time, but the second
> time I tried it.
>
> Could you please try to restore, cancel that restore then when it cannot
> do the restore, and do that
> restore again?
>
> If that works, we can try to debug what is going wrong, because I think in
> principle what you do
> should work automatically (find the volume also in the other storage).
>
> Best regards,
>
> Philipp
>
>
> Am 13.01.2014 21:50, schrieb Olivier Gagnon:
> > Hello,
> >
> > Here is the situation:
> >
> > I have a Pool named FileMonthly where the Full backup are made each
> month. The Volumes are 2TB and upon completion, are stored on 2TB Hard
> Drives that are sent off site.
> >
> > I created another Storage pointing to the Hard Drive bay mount point of
> the server, another Pool named Offsite using and used the 'update' command
> to move the Volumes to this Pool.
> >
> > However, if I want to restore from it, the job will look by default on
> the Storage the Backup Job was made on for the Volume. Not the Storage of
> the Pool it is in.
> >
> > There are 3 ways to resolve that but none are suitable. I could update
> the StorageId of the Volumes after their creation. I could create a symlink
> to the Volume after mounting the HD. And I could force the storage while
> using the restore command. Solution 1 is a hack. Solution 2 demands to log
> on the server and too manual. Solution 3 would break a restore with Volumes
> in two different Storage.
> >
> > Is there a better way to achieve what I want ?
> >
> > Thanks,
> >
> > O.
> >
>
>
> --
> Mit freundlichen Grüßen
>
> Philipp Storz [email protected]
> Bareos GmbH & Co. KG Phone: Phone: +49221630693-92
> http://www.bareos.com Fax: +49221630693-10
>
> Sitz der Gesellschaft: Köln | Amtsgericht Köln: HRA 29646
> Geschäftsführer: Stephan Dühr, M. Außendorf,
> J. Steffens, P. Storz, M. v. Wieringen
>
> --
> You received this message because you are subscribed to a topic in the
> Google Groups "bareos-users" group.
> To unsubscribe from this topic, visit
> https://groups.google.com/d/topic/bareos-users/ufe9OfvyYVE/unsubscribe.
> To unsubscribe from this group and all its topics, send an email to
> [email protected].
> To post to this group, send email to [email protected].
> For more options, visit https://groups.google.com/groups/opt_out.
>
--
You received this message because you are subscribed to the Google Groups
"bareos-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To post to this group, send email to [email protected].
For more options, visit https://groups.google.com/groups/opt_out.
