Hi@all, First I should note that the backup works with bareos but when I label tapes I get the folloing error:
*label pool=Full volume=Montag Automatically selected Catalog: MyCatalog Using Catalog "MyCatalog" Automatically selected Storage: Tape Connecting to Storage daemon Tape at kvm01:9103 ... Sending label command for Volume "Montag" Slot 0 ... block.c:998 Read error on fd=5 at file:blk 0:0 on device "LTO4-Drive" (/dev/nst0). ERR=Input/output error. 3000 OK label. VolBytes=64512 Volume="Montag" Device="LTO4-Drive" (/dev/nst0) Catalog record for Volume "Montag", Slot 0 successfully created. Requesting to mount LTO4-Drive ... 3001 Mounted Volume: Montag 3001 Device ""LTO4-Drive" (/dev/nst0)" is already mounted with Volume "Montag" My tape is a tanberg LTO-4 hh with the current firmware. When I run a IO-Test with the tanberg-tool everything looks good. what means this error? with best regards sven -- You received this message because you are subscribed to the Google Groups "bareos-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. For more options, visit https://groups.google.com/d/optout.
