Hello Adam, what debug level did rou run the sd with?
Please run it with level 500 or so and post what it writes when it calls the autochanger command. It should exactly print the cmdline of the autochanger command and possible errors. Am 20.08.2014 09:43, schrieb A. Podstawka: > Hi, > > i have trouble getting bareos running correctly under FreeBSD with the > Storage Daemon on FreeBSD too: > > i get this output when i run "update slots" in bconsole: >> *update slots >> Automatically selected Catalog: MyCatalog >> Using Catalog "MyCatalog" >> Automatically selected Storage: GALADRIEL >> Connecting to Storage daemon GALADRIEL at gimli:9103 ... >> 3999 Device "/dev/pass16" not found or could not be opened. >> Device "/dev/pass16" has 0 slots. >> No slots in changer to scan. > > and this happens in debug mode in SD: >> gimli-sd: bnet.c:763-0 who=client host=172.x.x.x port=9103 >> gimli-sd: dir_cmd.c:332-0 Conn: Hello Director gimli-dir calling >> gimli-sd: dir_cmd.c:350-0 Got a DIR connection at 20-Aug-2014 09:29:27 >> gimli-sd: jcr.c:980-0 set_jcr_job_status(*System*, C) >> gimli-sd: jcr.c:991-0 OnEntry JobStatus=gimli-sd: jcr.c:1001-0 Set new stat. >> old: gimli-sd: >> jcr.c:1006-0 leave setJobStatus old=gimli-sd: sd_plugins.c:403-0 === enter >> new_plugins === >> gimli-sd: sd_plugins.c:419-0 sd-plugin-list size=1 >> gimli-sd: sd_plugins.c:427-0 Instantiate sd-plugin_ctx_list=802c16de8 JobId=0 >> gimli-sd: watchdog.c:198-0 Registered watchdog 80386a2d8, interval 600 one >> shot >> gimli-sd: btimers.c:180-0 Start bsock timer 80387d0a8 tid=802c06c00 for 600 >> secs at 1408519767 >> gimli-sd: cram-md5.c:64-0 send: auth cram-md5 <xxx> ssl=0 >> gimli-sd: cram-md5.c:123-0 cram-get received: auth cram-md5 <xxx> ssl=0 >> gimli-sd: cram-md5.c:142-0 sending resp to challenge: xxx >> gimli-sd: btimers.c:194-0 Stop bsock timer 80387d0a8 tid=802c06c00 at >> 1408519767. >> gimli-sd: watchdog.c:218-0 Unregistered watchdog 80386a2d8 >> gimli-sd: dir_cmd.c:239-0 Message channel init completed. >> gimli-sd: dir_cmd.c:250-0 <dird: autochanger slots /dev/pass16 >> >> gimli-sd: dir_cmd.c:268-0 Do command: autochanger >> gimli-sd: sd_plugins.c:252-0 sd-plugin_ctx_list=802c16de8 JobId=0 >> gimli-sd: sd_plugins.c:207-0 Event 2 disabled for this plugin. >> gimli-sd: sd_plugins.c:454-0 Free instance sd-plugin_ctx_list=802c16de8 >> JobId=0 >> gimli-sd: message.c:511-0 Close_msg jcr=803831128 >> gimli-sd: job.c:455-0 Start stored free_jcr >> gimli-sd: job.c:456-0 End Job JobId=0 803831128 >> gimli-sd: job.c:459-0 Send terminate jid=0 803831128 >> gimli-sd: job.c:567-0 End stored free_jcr >> gimli-sd: message.c:511-0 Close_msg jcr=0 >> gimli-sd: message.c:541-0 ===Begin close msg resource at 802c1a0e8 >> gimli-sd: message.c:655-0 Done walking message chain. >> gimli-sd: message.c:662-0 ===End close msg resource > > The Changerdevice is /dev/pass16 (or /dev/ch0) > the Drive Devices are /dev/pass11 till /dev/pass15 (or sa11 till sa15) > the rights: >> [root@gimli ~/bareos/src/stored]# ls -l /dev/pass* >> crw-rw-rw- 1 root operator 0x61 Aug 19 12:52 /dev/pass11 >> crw-rw-rw- 1 root operator 0x63 Aug 19 12:52 /dev/pass12 >> crw-rw-rw- 1 root operator 0x64 Aug 19 12:52 /dev/pass13 >> crw-rw-rw- 1 root operator 0x65 Aug 19 12:52 /dev/pass14 >> crw-rw-rw- 1 root operator 0x66 Aug 19 12:52 /dev/pass15 >> crw-rw-rw- 1 root operator 0x62 Aug 19 12:52 /dev/pass16 >> crw-rw-rw- 1 root operator 0x67 Aug 19 12:52 /dev/pass21 >> crw-rw-rw- 1 root operator 0x69 Aug 19 12:52 /dev/pass22 >> crw-rw-rw- 1 root operator 0x6a Aug 19 12:52 /dev/pass23 >> crw-rw-rw- 1 root operator 0x6b Aug 19 12:52 /dev/pass24 >> crw-rw-rw- 1 root operator 0x6c Aug 19 12:52 /dev/pass25 >> crw-rw-rw- 1 root operator 0x68 Aug 19 12:52 /dev/pass26 > > > > mtx-changer is working: >> [root@gimli ~/bareos/src/stored]# /opt/bareos/etc/mtx-changer /dev/pass16 >> slots 0 /dev/nsa11 0 >> 277 > > mtx is working too: > >> [root@gimli ~/bareos/src/stored]# mtx -f /dev/pass16 status >> Storage Changer /dev/pass16:5 Drives, 277 Slots ( 16 Import/Export ) >> Data Transfer Element 0:Empty >> Data Transfer Element 1:Empty >> Data Transfer Element 2:Empty >> Data Transfer Element 3:Empty >> Data Transfer Element 4:Empty >> ... >> Storage Element 276 IMPORT/EXPORT:Empty:VolumeTag= >> Storage Element 277 IMPORT/EXPORT:Empty:VolumeTag= > > what am i missing? > > Any ideas? > > Thanks in Advance > Adam > > > -- Mit freundlichen Grüßen Philipp Storz [email protected] Bareos GmbH & Co. KG Phone: Phone: +49221630693-92 http://www.bareos.com Fax: +49221630693-10 Sitz der Gesellschaft: Köln | Amtsgericht Köln: HRA 29646 Geschäftsführer: Stephan Dühr, M. Außendorf, J. Steffens, P. Storz, M. v. Wieringen -- You received this message because you are subscribed to the Google Groups "bareos-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. For more options, visit https://groups.google.com/d/optout.
