Hello John, What bareos version are you using?
I think that your problem might be a problem related to http://bugs.bareos.org/view.php?id=338 Just move/delete the scsicrypto-sd.so plugin so that it doesnt get loaded, Btape should work then. best regards, Philipp Am 17.01.2015 um 23:36 schrieb John Bolt: > Bareos is failing to complete the btape fill test. > I tried it with the "m" (2 tapes) and "s" (single tape). The log lines below > are for the "s" single tape run. > > I tried multiple times with both LTO units I have, an INTERNAL and AN > EXTERNAL one. > I had tweaked the "Maximum File Size" and "Maximum Block Size" for best > performance. > btape test worked successfully. Only fill is failing. > > I will really appreciate any help provided as these tests are very long (2 > hours each run) and I do not feel comfortable using a backup system that > fails its basic tests. > > By the way, it may be bug related because I selected "s" (single tape) and > Bareos btape informed that it wrote on the second tape (see log bellow). > > For this run the bareos-sd.conf contains the following lines: > > Device { > Name = "LTO-4 EXTERNAL" > Media Type = LTO-4 > Archive Device = /dev/st1 > Device Type = Tape > AutomaticMount = yes; # when device opened, read it > AlwaysOpen = yes; > RemovableMedia = yes; > RandomAccess = no; > Maximum File Size = 5G > Label Block Size = 64512 > Maximum Block Size = 262144 > LabelMedia = yes; > Changer Device = /dev/st0 > Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'" > Alert Command = "sh -c 'smartctl -H -l error %c'" > } > > > btape -v /dev/st1 > Tape block granularity is 1024 bytes. > btape: butil.c:301-0 Using device: "/dev/st1" for writing. > btape: btape.c:484-0 open device "LTO-4 EXTERNAL" (/dev/st1): OK > > *label > Enter Volume Name: TestVolume1 > Wrote Volume label for volume "TestVolume1". > *fill > .... > or the complete multiple tape (m) test: (s/m) s > Simple test (single tape) selected. > Wrote Start of Session label. > 18:19:02 Begin writing Bareos records to tape ... > Wrote block=5000, file,blk=1,5000 VolBytes=1,310,720,000 rate=77.10 MB/s > Wrote block=10000, file,blk=1,10000 VolBytes=2,621,440,000 rate=79.43 MB/s > ... > ... > Wrote block=1605000, file,blk=79,7638 VolBytes=420,741,120,000 rate=75.83 MB/s > Wrote block=1610000, file,blk=79,12638 VolBytes=422,051,840,000 rate=75.85 > MB/s > 17-Jan 19:51 btape JobId 0: End of Volume "TestVolume1" at 79:13746 on device > "LTO-4 EXTERNAL" (/dev/st1). Write of 262144 bytes got -1. > 17-Jan 19:51 btape JobId 0: Re-read of last block succeeded. > btape: btape.c:2736-0 Last block at: 79:13745 this_dev_block_num=13746 > btape: btape.c:2750-0 Block not written: FileIndex=12882385 blk_block=1611108 > Size=262144 > btape: block.c:96-0 Dump block Last block written 1c08260: size=262144 > BlkNum=1611107 > Hdrcksum=57dd6344 cksum=57dd6344 > btape: block.c:109-0 Rec: VId=1 VT=1421525883 FI=12882369 Strm=contDATA > len=22408 p=1c7d668 > btape: block.c:109-0 Rec: VId=1 VT=1421525883 FI=12882370 Strm=DATA > len=32768 p=1c82dfc > ... > ... > btape: block.c:109-0 Rec: VId=1 VT=1421525883 FI=12882376 Strm=DATA > len=32768 p=1cb2e44 > btape: block.c:109-0 Rec: VId=1 VT=1421525883 FI=12882377 Strm=DATA > len=32768 p=1cbae50 > > btape: block.c:96-0 Dump block Block not written 1c08180: size=262144 > BlkNum=1611108 > Hdrcksum=528c3a10 cksum=528c3a10 > btape: block.c:109-0 Rec: VId=1 VT=1421525883 FI=12882377 Strm=contDATA > len=22540 p=1c24f28 > btape: block.c:109-0 Rec: VId=1 VT=1421525883 FI=12882378 Strm=DATA > len=32768 p=1c2a740 > ... > ... > btape: block.c:109-0 Rec: VId=1 VT=1421525883 FI=12882385 Strm=DATA > len=32768 p=1c62794 > btape: btape.c:2771-0 End of tape 79:0. Volume Bytes=422,342,295,552. Write > rate = 75.78 MB/s > btape: btape.c:2336-0 Wrote 1000 blocks on second tape. Done. > Done writing 0 records ... > btape: btape.c:2405-0 Wrote state file last_block_num1=13745 last_block_num2=0 > btape: btape.c:2420-0 > > 19:51:55 Done filling tape at 79:0. Now beginning re-read of tape ... > btape: btape.c:2501-0 Enter do_unfill > 17-Jan 19:52 btape JobId 0: Warning: acquire.c:267 Read acquire: label.c:260 > Could not reserve volume TestVolume1 on "LTO-4 EXTERNAL" (/dev/st1) > Mount Volume "TestVolume1" on device "LTO-4 EXTERNAL" (/dev/st1) and press > return when ready: > Mount Volume "TestVolume1" on device "LTO-4 EXTERNAL" (/dev/st1) and press > return when ready: > > The "TestVolume1" IS ALREADY mounted on device "LTO-4 EXTERNAL" (/dev/st1) > but bareos btape does not accept it anymore. > -- Mit freundlichen Grüßen Philipp Storz [email protected] Bareos GmbH & Co. KG Phone: Phone: +49221630693-92 http://www.bareos.com Fax: +49221630693-10 Sitz der Gesellschaft: Köln | Amtsgericht Köln: HRA 29646 Geschäftsführer: Stephan Dühr, M. Außendorf, J. Steffens, P. Storz, M. v. Wieringen -- You received this message because you are subscribed to the Google Groups "bareos-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. For more options, visit https://groups.google.com/d/optout.
