thanks
that fixed it.
On 20/07/15 10:27, [email protected] wrote:
Zitat von Peter Tiernan <[email protected]>:
Good afternoon,
I am getting started with autochangers and tapes. I have tested my
autochanger and it is working properly, but when I try the "update
slots" command in bconsole i get the following error:
The defined Autochanger Storage resources are:
Selection list for "Storage" is empty!
I assume its a problem with my configuration. here is the storage
resource in bareos-dir.conf:
Storage {
Name = "Tape"
Address = "backup-tape.example.com"
Password = "password"
Device = "NEO60"
MediaType = "LTO4"
SddPort = 9103
}
Try with included "Autochanger = yes" in the DIR conf like explained
here
http://doc.bareos.org/master/html/bareos-manual-main-reference.html#x1-20400018
"You need to have Autochanger = yes in your Storage resource in your
bareos-_dir.conf file so that you will be prompted for the slot number
when you label Volumes."
Regards
Andreas
--
You received this message because you are subscribed to the Google Groups
"bareos-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To post to this group, send email to [email protected].
For more options, visit https://groups.google.com/d/optout.
