I'm trying to verify Bareos plays nice with my autoloader (Dell PV-124T with an LTO-3 drive), but am experiencing odd results.
"btape test" works, including the autoloader test. "btape fill", on the other hand, does some weird stuff: it never seems to finish, it just keeps re-loading the same tape over and over with a warning about "the number of files mismatch!". Is this a known issue, a problem with my setup, or am I missing something fundamental about what it's supposed to be doing? Thanks, -Adam Thompson athomp...@avant.ca The (abbreviated) btape output: [...hours of block writing to get to this point...] Wrote block=6550000, file,blk=42,39622 VolBytes=422,553,600,000 rate=77.15 MB/s Wrote block=6555000, file,blk=42,44622 VolBytes=422,876,160,000 rate=77.15 MB/s 05-Oct 13:01 btape JobId 0: End of Volume "TestVolume1" at 42:45610 on device "tapedrive-0" (/dev/tape/by-id/scsi-1IBM_ULTRIUM-TD3_1210358856-nst). Write of 64512 bytes got -1. 05-Oct 13:01 btape JobId 0: Re-read of last block succeeded. btape: btape.c:2736-0 Last block at: 42:45609 this_dev_block_num=45610 btape: btape.c:2771-0 End of tape 42:0. Volume Bytes=422,939,897,856. Write rate = 77.09 MB/s 05-Oct 13:01 btape JobId 0: End of medium on Volume "TestVolume1" Bytes=422,939,897,856 Blocks=6,555,987 at 05-Oct-2015 13:01. 05-Oct 13:01 btape JobId 0: 3307 Issuing autochanger "unload slot 1, drive 0" command. 05-Oct 13:02 btape JobId 0: 3304 Issuing autochanger "load slot 1, drive 0" command. 05-Oct 13:03 btape JobId 0: 3305 Autochanger "load slot 1, drive 0", status is OK. 05-Oct 13:03 btape JobId 0: Volume "TestVolume1" previously written, moving to end of data. 05-Oct 13:03 btape JobId 0: Warning: For Volume "TestVolume1": The number of files mismatch! Volume=43 Catalog=0 Correcting Catalog 05-Oct 13:03 btape JobId 0: New volume "TestVolume1" mounted on device "tapedrive-0" (/dev/tape/by-id/scsi-1IBM_ULTRIUM-TD3_1210358856-nst) at 05-Oct-2015 13:03. 05-Oct 13:03 btape JobId 0: End of Volume "TestVolume1" at 43:1 on device "tapedrive-0" (/dev/tape/by-id/scsi-1IBM_ULTRIUM-TD3_1210358856-nst). Write of 64512 bytes got -1. 05-Oct 13:03 btape JobId 0: Re-read of last block succeeded. btape: btape.c:2736-0 Last block at: 42:45609 this_dev_block_num=1 btape: btape.c:2771-0 End of tape 43:0. Volume Bytes=64,512. Write rate = 11 B/s 05-Oct 13:03 btape JobId 0: End of medium on Volume "TestVolume1" Bytes=64,512 Blocks=1 at 05-Oct-2015 13:03. 05-Oct 13:03 btape JobId 0: 3307 Issuing autochanger "unload slot 1, drive 0" command. 05-Oct 13:04 btape JobId 0: 3304 Issuing autochanger "load slot 1, drive 0" command. 05-Oct 13:05 btape JobId 0: 3305 Autochanger "load slot 1, drive 0", status is OK. 05-Oct 13:05 btape JobId 0: Volume "TestVolume1" previously written, moving to end of data. 05-Oct 13:06 btape JobId 0: Warning: For Volume "TestVolume1": The number of files mismatch! Volume=44 Catalog=0 Correcting Catalog [...more of the same...] The number of files mismatch! Volume=126 Catalog=0 Correcting Catalog 05-Oct 16:18 btape JobId 0: New volume "TestVolume1" mounted on device "tapedrive-0" (/dev/tape/by-id/scsi-1IBM_ULTRIUM-TD3_1210358856-nst) at 05-Oct-2015 16:18. 05-Oct 16:18 btape JobId 0: End of Volume "TestVolume1" at 126:1 on device "tapedrive-0" (/dev/tape/by-id/scsi-1IBM_ULTRIUM-TD3_1210358856-nst). Write of 64512 bytes got -1. 05-Oct 16:18 btape JobId 0: Re-read of last block succeeded. btape: btape.c:2736-0 Last block at: 42:45609 this_dev_block_num=1 btape: btape.c:2771-0 End of tape 126:0. Volume Bytes=64,512. Write rate = 10 B/s 05-Oct 16:18 btape JobId 0: End of medium on Volume "TestVolume1" Bytes=64,512 Blocks=1 at 05-Oct-2015 16:18. 05-Oct 16:18 btape JobId 0: 3307 Issuing autochanger "unload slot 1, drive 0" command. ^C [...I gave up here...] -- You received this message because you are subscribed to the Google Groups "bareos-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to bareos-users+unsubscr...@googlegroups.com. To post to this group, send email to bareos-users@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
