Dear all
(ad a) Now, it seems to work -- even though I am not sure that the
communication is now indeed protected by TLS.
in bareos-dir.conf, I changed the storage section to
Storage {
Name = FileStorage1
Address = backup.fritz.box # N.B. Use a fully qualified name here
SDPort = 9103
Password = "password"
Device = FileStorage1
Media Type = File
TLS Enable = yes
TLS Require = yes
TLS CA Certificate File = /etc/bareos/ssl/cacert.pem
TLS Certificate = /etc/bareos/ssl/qtron.gloetzner.net.crt
TLS Key = /etc/bareos/ssl/qtron.gloetzner.net.key
}
In bareos-sd.conf, I have changed the director section to:
Director {
Name = backup-dir
Password = "<password>"
TLS Certificate = /etc/bareos/ssl/qtron.fritz.box.crt
TLS Key = /etc/bareos/ssl/qtron.fritz.box.key
TLS CA Certificate File = /etc/bareos/ssl/cacert.pem
TLS Allowed CN = backup.dns,net
TLS Allowed CN = backup.fritz.box
TLS Enable = yes
TLS Require = yes
TLS Verify Peer = yes
}
Is it possible to check if the communication runs indeed encrypted? I have seen
posts of other with the same question, but the responses were somewhat
unsatisfying: The suggestion was to issue a status command to the storage
daemon...
Thanks
Tilman
--
You received this message because you are subscribed to the Google Groups
"bareos-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To post to this group, send email to [email protected].
For more options, visit https://groups.google.com/d/optout.
