Damiano! So should I let go -maybe you're right (but not yet)? *update slots scan storage=Tape Connecting to Storage daemon Tape at BRZE-BareOS:9103 ... 3306 Issuing autochanger "slots" command. Device "3573-TL" has 24 slots. Connecting to Storage daemon Tape at BRZE-BareOS:9103 ... 3306 Issuing autochanger "list" command. Connecting to Storage daemon Tape at BRZE-BareOS:9103 ... 3902 Cannot mount Volume on Storage Device ""ULT3580-HH5" (/dev/tape/by-id/scsi-32004000e11168106-nst)" because: Requested Volume "" on "ULT3580-HH5" (/dev/tape/by-id/scsi-32004000e11168106-nst) is not a Bareos labeled Volume, because: ERR=block.c:1021 Read zero bytes at 0:0 on device "ULT3580-HH5" (/dev/tape/by-id/scsi-32004000e11168106-nst). No VolName for Slot=1 InChanger set to zero. Connecting to Storage daemon Tape at BRZE-BareOS:9103 ... 3307 Issuing autochanger "unload slot 1, drive 0" command. 3304 Issuing autochanger "load slot 2, drive 0" command. 3305 Autochanger "load slot 2, drive 0", status is OK. block.c:1021 Read zero bytes at 0:0 on device "ULT3580-HH5" (/dev/tape/by-id/scsi-32004000e11168106-nst). block.c:1003 Read error on fd=4 at file:blk 0:0 on device "ULT3580-HH5" (/dev/tape/by-id/scsi-32004000e11168106-nst). ERR=Input/output error. 3902 Cannot mount Volume on Storage Device ""ULT3580-HH5" (/dev/tape/by-id/scsi-32004000e11168106-nst)" because: Requested Volume "" on "ULT3580-HH5" (/dev/tape/by-id/scsi-32004000e11168106-nst) is not a Bareos labeled Volume, because: ERR=block.c:1003 Read error on fd=4 at file:blk 0:0 on device "ULT3580-HH5" (/dev/tape/by-id/scsi-32004000e11168106-nst). ERR=Input/output error. No VolName for Slot=2 InChanger set to zero. Connecting to Storage daemon Tape at BRZE-BareOS:9103 ... 3307 Issuing autochanger "unload slot 2, drive 0" command. 3304 Issuing autochanger "load slot 3, drive 0" command. 3305 Autochanger "load slot 3, drive 0", status is OK. block.c:1003 Read error on fd=4 at file:blk 0:0 on device "ULT3580-HH5" (/dev/tape/by-id/scsi-32004000e11168106-nst). ERR=Input/output error. block.c:1003 Read error on fd=4 at file:blk 0:0 on device "ULT3580-HH5" (/dev/tape/by-id/scsi-32004000e11168106-nst). ERR=Input/output error. 3902 Cannot mount Volume on Storage Device ""ULT3580-HH5" (/dev/tape/by-id/scsi-32004000e11168106-nst)" because: Requested Volume "" on "ULT3580-HH5" (/dev/tape/by-id/scsi-32004000e11168106-nst) is not a Bareos labeled Volume, because: ERR=block.c:1003 Read error on fd=4 at file:blk 0:0 on device "ULT3580-HH5" (/dev/tape/by-id/scsi-32004000e11168106-nst). ERR=Input/output error. No VolName for Slot=3 InChanger set to zero.
[...] I must label the tapes and add to pool? *label storage=Tape slot=1-24 label pool=Full_Tape barcodes -- You received this message because you are subscribed to the Google Groups "bareos-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. For more options, visit https://groups.google.com/d/optout.
