On Wednesday, June 14, 2017 at 7:15:38 PM UTC+5:30, Jon SCHEWE wrote: > What do you get from the following command? > > mtx -f /dev/tape/by-id/scsi-1IBM_03584L32_0000078267420401 > > > > > > I've found that it's best to test with mtx and mt as that's what bareos calls > to do things. > > > > > > > > > > > > -- > > Research Scientist > > Raytheon BBN Technologies > > 5775 Wayzata Blvd, Ste 630 > > Saint Louis Park, MN, 55416 > > Office: 952-545-5720 > > > > > > > > > From: [email protected] <[email protected]> on behalf of > Viswanathan R <[email protected]> > > Sent: Wednesday, June 14, 2017 7:03:05 AM > > To: bareos-users > > Subject: [bareos-users] configuring tape device in bareos > > > > > > > Hi, > > I am trying to configure an IBM tape library in bareos but it couldn't use > the tape drives while triggering backup. I am getting the below error while > running "update slots" cmd in bconsole. > > > > *update slots > > Automatically selected Catalog: MyCatalog > > Using Catalog "MyCatalog" > > Automatically selected Storage: Tape > > Connecting to Storage daemon Tape at bc2cmk108.in.ibm.com:9103 ... > > 3998 Device ""3583-changer" > (/dev/tape/by-id/scsi-1IBM_03584L32_0000078267420401)" is not an autochanger. > > Device "3583-changer" has 0 slots. > > No slots in changer to scan. > > > > *label barcodes storage=Tape > > Connecting to Storage daemon Tape at bc2cmk108.in.ibm.com:9103 ... > > 3998 Device ""3583-changer" > (/dev/tape/by-id/scsi-1IBM_03584L32_0000078267420401)" is not an autochanger. > > Select Drive: > > Selection list for "Drive" is empty! > > Connecting to Storage daemon Tape at bc2cmk108.in.ibm.com:9103 ... > > 3998 Device ""3583-changer" > (/dev/tape/by-id/scsi-1IBM_03584L32_0000078267420401)" is not an autochanger. > > Device "3583-changer" has 0 slots. > > No slots in changer to scan. > > > > But "btape" cmd is able to identify the drive and medium changer. The > configuration info is as below. > > > > /etc/bareos/bareos-dir.d/storage/Tape.conf (tape device conf file) > > Storage { > > Name = Tape > > Address = server.com # N.B. Use a fully qualified name here > (do not use "localhost" here). > > Password = "KaqAI1Un4lXK4WOXpfUr1RV5l5Irmqxj9Q+DXL9N+Qcf" > > Device = 3583-changer > > Media Type = LTO > > AutoChanger = yes > > } > > > > /etc/bareos/bareos-sd.d/autochanger/autochanger.conf (bareos sd conf file) > > Autochanger { > > Name = 3583-changer > > Changer Device = /dev/tape/by-id/scsi-1IBM_03584L32_0000078267420401 > > Device = Drive1 > > Changer Command = "/usr/lib/bareos/scripts/mtx-changer %c %o %S %a %d" > > } > > > > Device { > > Name = Drive1 > > Drive Index = 0 > > Media Type = LTO > > Archive Device = /dev/tape/by-id/scsi-350050760440b5801-nst > > AutomaticMount = yes; # when device opened, read it > > AlwaysOpen = yes; > > RemovableMedia = yes; > > RandomAccess = no; > > Maximum File Size = 3GB > > AutoChanger = yes > > Label Media = yes > > } > > > > /etc/bareos/bareos-sd.d/device/3583-changer.conf (device conf file) > > Device { > > > > Name = "3583-changer" > > DeviceType = tape > > > > # default:0, only required if the autoloader have multiple drives. > > > > # if only one drive is available, this is normally /dev/nst0. > > # However, it is advised to access it via id (/dev/tape/by-id/...). > > ArchiveDevice = /dev/tape/by-id/scsi-1IBM_03584L32_0000078267420401 > > #ArchiveDevice = /dev/tape/by-id/scsi-350011d00018a5f03-nst > > > > # arbitrary string that descripes the the storage media. > > # Bareos uses this to determine, which device can be handle what media. > > MediaType = LTO > > > > # enable "Check Labels" if tapes with ANSI/IBM labels > > # should be preserved > > Check Labels = yes > > > > AutoChanger = yes # default: no > > AutomaticMount = yes # default: no > > MaximumFileSize = 10GB # default: 1000000000 (1GB) > > Label Media = yes > > } > > > > > > Please help me where am I going wrong. Let me know if you need any more > information. > > Thanks, > > Viswa > > > > -- > > You received this message because you are subscribed to the Google Groups > "bareos-users" group. > > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > > To post to this group, send email to [email protected]. > > For more options, visit https://groups.google.com/d/optout.
Hi, I am not getting any output on that command. Regards, Viswa -- You received this message because you are subscribed to the Google Groups "bareos-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. For more options, visit https://groups.google.com/d/optout.
