Hello, Finally I think I've found the problem. The configured catalog on pools is ignored if is different than default pool on job. I had a defJob with the default pool configured that is used on all my jobs, so the configured pools on the other resources are ignored (even when all kind of pools are configured).
I had other kind of problem with bareos and weekends, but maybe is related. If I continue having problems I'll sent another message ;) Greetings!!. 2017-07-11 13:55 GMT+02:00 Daniel Carrasco <[email protected]>: > Hello, > > Thanks for your reply. > > My configuration looks like this: > > --------------------- client.conf --------------------- > Client { > Name = backup.server > Address = example.com > Password = "BlahBlah" > > AutoPrune = yes > Catalog = "backup" > } > > Job { > Name = "backup_system" > JobDefs = "DefaultJob" > FileSet = "LinuxNoServer" > Client = "backup.server" > Schedule = "WeeklyCycle_test" > > # Indicamos el catálogo que se usará > Catalog = "backup" > > # Seleccionamos pools personalizados para separar los volúmenes > Full Backup Pool = backup-Full > Differential Backup Pool = backup-Differential > Incremental Backup Pool = backup-Incremental > } > > > ---------------------- pools.conf ------------------------ > Pool { > Name = backup-Full > Catalog = backup > Pool Type = Backup > Recycle = yes > AutoPrune = yes > Volume Retention = 15 days > Job Retention = 15 days > Volume Use Duration = 1 day > Purge Oldest Volume = yes > Recycle Oldest Volume = yes > Maximum Volumes = 100 > Label Format = "backup-$Client-Full-$NumVols" > } > > Pool { > Name = backup-Differential > Catalog = backup > Pool Type = Backup > Recycle = yes > AutoPrune = yes > Volume Retention = 15 days > Job Retention = 15 days > Volume Use Duration = 1 day > Purge Oldest Volume = yes > Recycle Oldest Volume = yes > Maximum Volumes = 100 > Label Format = "backup-$Client-Differential-$NumVols" > } > > Pool { > Name = backup-Incremental > Catalog = backup > Pool Type = Backup > Recycle = yes > AutoPrune = yes > Volume Retention = 15 days > Job Retention = 15 days > Volume Use Duration = 1 day > Purge Oldest Volume = yes > Recycle Oldest Volume = yes > Maximum Volumes = 100 > Label Format = "backup-$Client-Incremental-$NumVols" > } > > ---------------------------------------------------------------------- > > I've removed the catalog from DefaultJob to test, but is ignored. When I > run the job using the command "run client=backup.server" works fine and is > stored on the configured catalog (backup), but when is executed by the > configured schedule (WeeklyCycle_test), then is stored on the other catalog > (that maybe is the default). > > That default catalog is only configured on default pool (Full, Incremental > and Differential) and on clients that I need to backup in that catalog. > > Another info: > > *show client=backup.server > Client { > Name = "backup.server" > Address = "example.com" > Password = "[md5]xxxxxxx" > Catalog = "backup" > AutoPrune = yes > } > > > > Terminated jobs: > 3 Incr 376 2.100 G OK 11-jul-17 09:41 backup.server > 90 Incr 311 1.950 G OK 11-jul-17 10:27 backup.server > > The first was run manually and the job number means that is stored on new > catalog, but the second was run by schedule and was stored on main catalog. > > > Thanks and greetings!! > > 2017-07-11 12:19 GMT+02:00 Jörg Steffens <[email protected]>: > >> Hi, >> >> hard to tell. >> You should provide an example (relevant configuration lines, console >> output and relevant part of the joblog). Maybe something get obvious by >> this. >> >> regards, >> Jörg >> >> On 11.07.2017 at 11:56 wrote [email protected]: >> > Hello, >> > >> > I'm trying to create a director with multiple catalogs to split >> clients, but I've noticed that the catalog used when the job is launched >> manually and when is scheduled is different. >> > >> > I've configured the catalog on client, pool and job definitions, and >> I've revised that is not configured on schedules. >> > >> > >> > My schedule is this: >> > >> > Schedule { >> > Name = "WeeklyCycle_test" >> > Run = Level=Full 1st sat at 2:00 >> > Run = Level=Differential 2nd-5th sat at 2:00 >> > Run = Level=Incremental sun-fri at 2:00 >> > } >> > >> > >> > What can be the problem? >> > >> > thanks!! >> > >> >> >> -- >> Jörg Steffens [email protected] >> Bareos GmbH & Co. KG Phone: +49 221 630693-91 >> http://www.bareos.com Fax: +49 221 630693-10 >> >> Sitz der Gesellschaft: Köln | Amtsgericht Köln: HRA 29646 >> Komplementär: Bareos Verwaltungs-GmbH >> Geschäftsführer: >> S. Dühr, M. Außendorf, Jörg Steffens, P. Storz >> >> -- >> You received this message because you are subscribed to a topic in the >> Google Groups "bareos-users" group. >> To unsubscribe from this topic, visit https://groups.google.com/d/to >> pic/bareos-users/tnxhoN_I4yc/unsubscribe. >> To unsubscribe from this group and all its topics, send an email to >> [email protected]. >> To post to this group, send email to [email protected]. >> For more options, visit https://groups.google.com/d/optout. >> > > > > -- > _________________________________________ > > Daniel Carrasco Marín > Ingeniería para la Innovación i2TIC, S.L. > Tlf: +34 911 12 32 84 Ext: 223 > www.i2tic.com > _________________________________________ > -- _________________________________________ Daniel Carrasco Marín Ingeniería para la Innovación i2TIC, S.L. Tlf: +34 911 12 32 84 Ext: 223 www.i2tic.com _________________________________________ -- You received this message because you are subscribed to the Google Groups "bareos-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. For more options, visit https://groups.google.com/d/optout.
