On Thursday, September 15, 2016 at 9:19:15 AM UTC+2, pavlovbor wrote:
> Hi all,
>
> I would like to report problem with btape tests with bareos-storage-tape
> package in versions greater than 14.2.
>
> My environment is CentOS 6.8 i686. I have Dell PowerVault 124T tape library
> attached to server for backup purpose.
>
> I installed bareos 14.2 and btape test works fine. I configured backups: tape
> drive and auto loader work like expected.
>
> I wanted to move to version 15.2 to test vmware plugin, uninstalled version
> 14.2, installed version 15.2 (via yum from bareos repository) but btape test
> reports errors. I tried also version 16.3, same results. When I return to
> version 14.2 everything works normally.
>
> I thought that problem is may be with block size but even when I set in
> bareos tape device definition fixed block size I can't pass btape tests with
> versions 15.2 and 16.3.
>
> Did anybody experience same problem.
>
> Thanks for answers and help,
>
> Boris
>
> Here are results of tests
>
> #wget -O /etc/yum.repos.d/bareos.repo
> http://download.bareos.org/bareos/experimental/nightly/CentOS_6/bareos:master.repo
> #yum install bareos-storage-tape
>
> /etc/bareos/bareos-sd.d/device/FileStorage.conf
> Autochanger {
> Name = PV-124T
> Device = ULTRIUM-TD3
> Changer Device = /dev/sg6
> Changer Command = "/usr/lib/bareos/scripts/mtx-changer %c %o %S %a %d"
> }
>
> Device {
> Name = ULTRIUM-TD3
> Media Type = LTO-3
> Archive Device = /dev/nst0
> Autochanger = yes
> AutomaticMount = yes
> AlwaysOpen = yes
> }
>
> # btape -v /dev/nst0
> Tape block granularity is 1024 bytes.
> btape: butil.c:274-0 Using device: "/dev/nst0" for writing.
> btape: btape.c:482-0 open device "ULTRIUM-TD3" (/dev/nst0): OK
> *test
>
> === Write, rewind, and re-read test ===
>
> I'm going to write 10000 records and an EOF
> then write 0 records and an EOF, then rewind,
> and re-read the data to verify that it is correct.
>
> This is an *essential* feature ...
>
> btape: btape.c:1167-0 Wrote 10000 blocks of 0 bytes.
> btape: btape.c:614-0 Wrote 1 EOF to "ULTRIUM-TD3" (/dev/nst0)
> btape: btape.c:1183-0 Wrote 10000 blocks of 0 bytes.
> btape: btape.c:614-0 Wrote 1 EOF to "ULTRIUM-TD3" (/dev/nst0)
> btape: btape.c:1225-0 Rewind OK.
> 05-Sep 13:43 btape JobId 0: Error: block.c:333 Volume data error at 0:0!
> Block checksum mismatch in block=0 len=64448: calc=aab08ced blk=b1d8a199
> btape: block.c:96-0 Dump block with checksum error 8c0a888: size=64448
> BlkNum=0
> Hdrcksum=b1d8a199 cksum=aab08ced
> btape: block.c:109-0 Rec: VId=0 VT=0 FI=0 Strm=0 len=64412 p=8c0ea00
> btape: block.c:109-0 Rec: VId=0 VT=0 FI=1431655765 Strm=1431655765
> len=1431655765 p=8c1e5a8
> btape: btape.c:1245-0 Read block 1 failed! ERR=Input/output error
>
>
> Or
>
> # btape -v /dev/nst0
> Tape block granularity is 1024 bytes.
> btape: butil.c:274-0 Using device: "/dev/nst0" for writing.
> btape: btape.c:482-0 open device "ULTRIUM-TD3" (/dev/nst0): OK
> *test
>
> === Write, rewind, and re-read test ===
>
> I'm going to write 10000 records and an EOF
> then write 0 records and an EOF, then rewind,
> and re-read the data to verify that it is correct.
>
> This is an *essential* feature ...
>
> btape: btape.c:1167-0 Wrote 10000 blocks of 0 bytes.
> btape: btape.c:614-0 Wrote 1 EOF to "ULTRIUM-TD3" (/dev/nst0)
> btape: btape.c:1183-0 Wrote 10000 blocks of 0 bytes.
> btape: btape.c:614-0 Wrote 1 EOF to "ULTRIUM-TD3" (/dev/nst0)
> btape: btape.c:1225-0 Rewind OK.
> btape: btape.c:1257-0 Bad data in record. Expected 1, got 20000 at byte 0.
> Test failed!
> *
> [root@rajdolina ~]# btape -v /dev/nst0
> Tape block granularity is 1024 bytes.
> btape: butil.c:274-0 Using device: "/dev/nst0" for writing.
> btape: btape.c:482-0 open device "ULTRIUM-TD3" (/dev/nst0): OK
> *test
>
> === Write, rewind, and re-read test ===
>
> I'm going to write 10000 records and an EOF
> then write 0 records and an EOF, then rewind,
> and re-read the data to verify that it is correct.
>
> This is an *essential* feature ...
>
> btape: btape.c:1167-0 Wrote 10000 blocks of 0 bytes.
> btape: btape.c:614-0 Wrote 1 EOF to "ULTRIUM-TD3" (/dev/nst0)
> btape: btape.c:1183-0 Wrote 10000 blocks of 0 bytes.
> btape: btape.c:614-0 Wrote 1 EOF to "ULTRIUM-TD3" (/dev/nst0)
> btape: btape.c:1225-0 Rewind OK.
> btape: btape.c:1257-0 Bad data in record. Expected 1, got 20000 at byte 0.
> Test failed!
> *
>
>
> === Autochanger test ===
>
> 3301 Issuing autochanger "loaded" command.
> Slot 1 loaded. I am going to unload it.
> 3302 Issuing autochanger "unload 1 0" command.
> unload status=OK 0
> 3303 Issuing autochanger "load 1 0" command.
> 3303 Autochanger "load 1 0" status is OK.
> btape: btape.c:482-0 open device "ULTRIUM-TD3" (/dev/nst0): OK
> btape: btape.c:1583-0 Rewound "ULTRIUM-TD3" (/dev/nst0)
> btape: btape.c:1590-0 Wrote EOF to "ULTRIUM-TD3" (/dev/nst0)
>
> The test autochanger worked!!
>
>
> Version 14.2
>
> btape tests works normally with version 14.2
>
>
> wget -O /etc/yum.repos.d/bareos.repo
> http://download.bareos.org/bareos/release/14.2/RHEL_6/bareos.repo
>
> yum install bareos-storage-tape
>
> # btape -v /dev/nst0
> Tape block granularity is 1024 bytes.
> btape: butil.c:301-0 Using device: "/dev/nst0" for writing.
> btape: btape.c:484-0 open device "ULTRIUM-TD3" (/dev/nst0): OK
> *test
>
> === Write, rewind, and re-read test ===
>
> I'm going to write 10000 records and an EOF
> then write 0 records and an EOF, then rewind,
> and re-read the data to verify that it is correct.
>
> This is an *essential* feature ...
>
> btape: btape.c:1171-0 Wrote 10000 blocks of 0 bytes.
> btape: btape.c:616-0 Wrote 1 EOF to "ULTRIUM-TD3" (/dev/nst0)
> btape: btape.c:1187-0 Wrote 10000 blocks of 0 bytes.
> btape: btape.c:616-0 Wrote 1 EOF to "ULTRIUM-TD3" (/dev/nst0)
> btape: btape.c:1229-0 Rewind OK.
> 10000 blocks re-read correctly.
> Got EOF on tape.
> 10000 blocks re-read correctly.
> === Test Succeeded. End Write, rewind, and re-read test ===
>
> btape: btape.c:1297-0 Block position test
> btape: btape.c:1309-0 Rewind OK.
> Reposition to file:block 0:4
> Block 5 re-read correctly.
> Reposition to file:block 0:200
> Block 201 re-read correctly.
> Reposition to file:block 0:9999
> Block 10000 re-read correctly.
> Reposition to file:block 1:0
> Block 10001 re-read correctly.
> Reposition to file:block 1:600
> Block 10601 re-read correctly.
> Reposition to file:block 1:9999
> Block 20000 re-read correctly.
> === Test Succeeded. End Write, rewind, and re-read test ===
>
>
>
> === Append files test ===
>
> This test is essential to Bareos.
>
> I'm going to write one record in file 0,
> two records in file 1,
> and three records in file 2
>
> btape: btape.c:586-0 Rewound "ULTRIUM-TD3" (/dev/nst0)
> btape: btape.c:1928-0 Wrote one record of 64412 bytes.
> btape: btape.c:1930-0 Wrote block to device.
> btape: btape.c:616-0 Wrote 1 EOF to "ULTRIUM-TD3" (/dev/nst0)
> btape: btape.c:1928-0 Wrote one record of 64412 bytes.
> btape: btape.c:1930-0 Wrote block to device.
> btape: btape.c:1928-0 Wrote one record of 64412 bytes.
> btape: btape.c:1930-0 Wrote block to device.
> btape: btape.c:616-0 Wrote 1 EOF to "ULTRIUM-TD3" (/dev/nst0)
> btape: btape.c:1928-0 Wrote one record of 64412 bytes.
> btape: btape.c:1930-0 Wrote block to device.
> btape: btape.c:1928-0 Wrote one record of 64412 bytes.
> btape: btape.c:1930-0 Wrote block to device.
> btape: btape.c:1928-0 Wrote one record of 64412 bytes.
> btape: btape.c:1930-0 Wrote block to device.
> btape: btape.c:616-0 Wrote 1 EOF to "ULTRIUM-TD3" (/dev/nst0)
> btape: btape.c:484-0 open device "ULTRIUM-TD3" (/dev/nst0): OK
> btape: btape.c:586-0 Rewound "ULTRIUM-TD3" (/dev/nst0)
> btape: btape.c:1441-0 Now moving to end of medium.
> btape: btape.c:637-0 Moved to end of medium.
> We should be in file 3. I am at file 3. This is correct!
>
> Now the important part, I am going to attempt to append to the tape.
>
> btape: btape.c:1928-0 Wrote one record of 64412 bytes.
> btape: btape.c:1930-0 Wrote block to device.
> btape: btape.c:616-0 Wrote 1 EOF to "ULTRIUM-TD3" (/dev/nst0)
> btape: btape.c:586-0 Rewound "ULTRIUM-TD3" (/dev/nst0)
> Done appending, there should be no I/O errors
>
> Doing Bareos scan of blocks:
> Block=19999 file,blk=0,1 blen=64448 First rec FI=0 SessId=0 SessTim=0 Strm=0
> rlen=64412
> 1 block of 64448 bytes in file 1
> End of File mark.
> Block=20000 file,blk=1,1 blen=64448 First rec FI=0 SessId=0 SessTim=0 Strm=0
> rlen=64412
> Block=20001 file,blk=1,2 blen=64448 First rec FI=0 SessId=0 SessTim=0 Strm=0
> rlen=64412
> 2 blocks of 64448 bytes in file 2
> End of File mark.
> Block=20002 file,blk=2,1 blen=64448 First rec FI=0 SessId=0 SessTim=0 Strm=0
> rlen=64412
> Block=20003 file,blk=2,2 blen=64448 First rec FI=0 SessId=0 SessTim=0 Strm=0
> rlen=64412
> Block=20004 file,blk=2,3 blen=64448 First rec FI=0 SessId=0 SessTim=0 Strm=0
> rlen=64412
> 3 blocks of 64448 bytes in file 3
> End of File mark.
> Block=20005 file,blk=3,1 blen=64448 First rec FI=0 SessId=0 SessTim=0 Strm=0
> rlen=64412
> 1 block of 64448 bytes in file 4
> End of File mark.
> Total files=4, blocks=7, bytes = 451,136
> End scanning the tape.
> We should be in file 4. I am at file 4. This is correct!
>
> The above Bareos scan should have output identical to what follows.
> Please double check it ...
> === Sample correct output ===
> 1 block of 64448 bytes in file 1
> End of File mark.
> 2 blocks of 64448 bytes in file 2
> End of File mark.
> 3 blocks of 64448 bytes in file 3
> End of File mark.
> 1 block of 64448 bytes in file 4
> End of File mark.
> Total files=4, blocks=7, bytes = 451,136
> === End sample correct output ===
>
> If the above scan output is not identical to the
> sample output, you MUST correct the problem
> or Bareos will not be able to write multiple Jobs to
> the tape.
>
>
> === Write, backup, and re-read test ===
>
> I'm going to write three records and an EOF
> then backup over the EOF and re-read the last record.
> Bareos does this after writing the last block on the
> tape to verify that the block was written correctly.
>
> This is not an *essential* feature ...
>
> btape: btape.c:586-0 Rewound "ULTRIUM-TD3" (/dev/nst0)
> btape: btape.c:823-0 Wrote first record of 64412 bytes.
> btape: btape.c:834-0 Wrote second record of 64412 bytes.
> btape: btape.c:845-0 Wrote third record of 64412 bytes.
> btape: btape.c:616-0 Wrote 1 EOF to "ULTRIUM-TD3" (/dev/nst0)
> btape: btape.c:861-0 Backspaced over EOF OK.
> btape: btape.c:866-0 Backspace record OK.
> btape: btape.c:884-0
> Block re-read correct. Test succeeded!
> === End Write, backup, and re-read test ===
>
>
>
> === Forward space files test ===
>
> This test is essential to Bareos.
>
> I'm going to write five files then test forward spacing
>
> btape: btape.c:586-0 Rewound "ULTRIUM-TD3" (/dev/nst0)
> btape: btape.c:1928-0 Wrote one record of 64412 bytes.
> btape: btape.c:1930-0 Wrote block to device.
> btape: btape.c:616-0 Wrote 1 EOF to "ULTRIUM-TD3" (/dev/nst0)
> btape: btape.c:1928-0 Wrote one record of 64412 bytes.
> btape: btape.c:1930-0 Wrote block to device.
> btape: btape.c:1928-0 Wrote one record of 64412 bytes.
> btape: btape.c:1930-0 Wrote block to device.
> btape: btape.c:616-0 Wrote 1 EOF to "ULTRIUM-TD3" (/dev/nst0)
> btape: btape.c:1928-0 Wrote one record of 64412 bytes.
> btape: btape.c:1930-0 Wrote block to device.
> btape: btape.c:1928-0 Wrote one record of 64412 bytes.
> btape: btape.c:1930-0 Wrote block to device.
> btape: btape.c:1928-0 Wrote one record of 64412 bytes.
> btape: btape.c:1930-0 Wrote block to device.
> btape: btape.c:616-0 Wrote 1 EOF to "ULTRIUM-TD3" (/dev/nst0)
> btape: btape.c:1928-0 Wrote one record of 64412 bytes.
> btape: btape.c:1930-0 Wrote block to device.
> btape: btape.c:1928-0 Wrote one record of 64412 bytes.
> btape: btape.c:1930-0 Wrote block to device.
> btape: btape.c:616-0 Wrote 1 EOF to "ULTRIUM-TD3" (/dev/nst0)
> btape: btape.c:1928-0 Wrote one record of 64412 bytes.
> btape: btape.c:1930-0 Wrote block to device.
> btape: btape.c:616-0 Wrote 1 EOF to "ULTRIUM-TD3" (/dev/nst0)
> btape: btape.c:586-0 Rewound "ULTRIUM-TD3" (/dev/nst0)
> btape: btape.c:1655-0 Now forward spacing 1 file.
> We should be in file 1. I am at file 1. This is correct!
> btape: btape.c:1667-0 Now forward spacing 2 files.
> We should be in file 3. I am at file 3. This is correct!
> btape: btape.c:586-0 Rewound "ULTRIUM-TD3" (/dev/nst0)
> btape: btape.c:1680-0 Now forward spacing 4 files.
> We should be in file 4. I am at file 4. This is correct!
>
> btape: btape.c:1698-0 Now forward spacing 1 more file.
> We should be in file 5. I am at file 5. This is correct!
>
> === End Forward space files test ===
>
>
> Ah, I see you have an autochanger configured.
> To test the autochanger you must have a blank tape
> that I can write on in Slot 1.
>
> Do you wish to continue with the Autochanger test? (y/n): y
>
>
> === Autochanger test ===
>
> 3301 Issuing autochanger "loaded" command.
> Slot 1 loaded. I am going to unload it.
> 3302 Issuing autochanger "unload 1 0" command.
> unload status=OK 0
> 3303 Issuing autochanger "load 1 0" command.
> 3303 Autochanger "load 1 0" status is OK.
> btape: btape.c:484-0 open device "ULTRIUM-TD3" (/dev/nst0): OK
> btape: btape.c:1585-0 Rewound "ULTRIUM-TD3" (/dev/nst0)
> btape: btape.c:1592-0 Wrote EOF to "ULTRIUM-TD3" (/dev/nst0)
>
> The test autochanger worked!!
Hi,
is there an Update to this Bug? I'm getting the same Error in 17.2 or 16.2.4.
The Test is working for me in 14.2:
[root@backup01 bareos]# btape tape01
Tape block granularity is 1024 bytes.
btape: butil.c:301-0 Using device: "tape01" for writing.
btape: btape.c:484-0 open device "tape01"
(/dev/tape/by-id/scsi-1IBM_ULTRIUM-TD4_1310071621-nst): OK
*test
=== Write, rewind, and re-read test ===
I'm going to write 10000 records and an EOF
then write 10000 records and an EOF, then rewind,
and re-read the data to verify that it is correct.
This is an *essential* feature ...
btape: btape.c:1171-0 Wrote 10000 blocks of 64412 bytes.
btape: btape.c:616-0 Wrote 1 EOF to "tape01"
(/dev/tape/by-id/scsi-1IBM_ULTRIUM-TD4_1310071621-nst)
btape: btape.c:1187-0 Wrote 10000 blocks of 64412 bytes.
btape: btape.c:616-0 Wrote 1 EOF to "tape01"
(/dev/tape/by-id/scsi-1IBM_ULTRIUM-TD4_1310071621-nst)
btape: btape.c:1229-0 Rewind OK.
10000 blocks re-read correctly.
Got EOF on tape.
10000 blocks re-read correctly.
=== Test Succeeded. End Write, rewind, and re-read test ===
btape: btape.c:1297-0 Block position test
btape: btape.c:1309-0 Rewind OK.
Reposition to file:block 0:4
Block 5 re-read correctly.
Reposition to file:block 0:200
Block 201 re-read correctly.
Reposition to file:block 0:9999
Block 10000 re-read correctly.
Reposition to file:block 1:0
Block 10001 re-read correctly.
Reposition to file:block 1:600
Block 10601 re-read correctly.
Reposition to file:block 1:9999
Block 20000 re-read correctly.
=== Test Succeeded. End Write, rewind, and re-read test ===
=== Append files test ===
This test is essential to Bareos.
I'm going to write one record in file 0,
two records in file 1,
and three records in file 2
btape: btape.c:586-0 Rewound "tape01"
(/dev/tape/by-id/scsi-1IBM_ULTRIUM-TD4_1310071621-nst)
btape: btape.c:1928-0 Wrote one record of 64412 bytes.
btape: btape.c:1930-0 Wrote block to device.
btape: btape.c:616-0 Wrote 1 EOF to "tape01"
(/dev/tape/by-id/scsi-1IBM_ULTRIUM-TD4_1310071621-nst)
btape: btape.c:1928-0 Wrote one record of 64412 bytes.
btape: btape.c:1930-0 Wrote block to device.
btape: btape.c:1928-0 Wrote one record of 64412 bytes.
btape: btape.c:1930-0 Wrote block to device.
btape: btape.c:616-0 Wrote 1 EOF to "tape01"
(/dev/tape/by-id/scsi-1IBM_ULTRIUM-TD4_1310071621-nst)
btape: btape.c:1928-0 Wrote one record of 64412 bytes.
btape: btape.c:1930-0 Wrote block to device.
btape: btape.c:1928-0 Wrote one record of 64412 bytes.
btape: btape.c:1930-0 Wrote block to device.
btape: btape.c:1928-0 Wrote one record of 64412 bytes.
btape: btape.c:1930-0 Wrote block to device.
btape: btape.c:616-0 Wrote 1 EOF to "tape01"
(/dev/tape/by-id/scsi-1IBM_ULTRIUM-TD4_1310071621-nst)
btape: btape.c:484-0 open device "tape01"
(/dev/tape/by-id/scsi-1IBM_ULTRIUM-TD4_1310071621-nst): OK
btape: btape.c:586-0 Rewound "tape01"
(/dev/tape/by-id/scsi-1IBM_ULTRIUM-TD4_1310071621-nst)
btape: btape.c:1441-0 Now moving to end of medium.
btape: btape.c:637-0 Moved to end of medium.
We should be in file 3. I am at file 3. This is correct!
Now the important part, I am going to attempt to append to the tape.
btape: btape.c:1928-0 Wrote one record of 64412 bytes.
btape: btape.c:1930-0 Wrote block to device.
btape: btape.c:616-0 Wrote 1 EOF to "tape01"
(/dev/tape/by-id/scsi-1IBM_ULTRIUM-TD4_1310071621-nst)
btape: btape.c:586-0 Rewound "tape01"
(/dev/tape/by-id/scsi-1IBM_ULTRIUM-TD4_1310071621-nst)
Done appending, there should be no I/O errors
Doing Bareos scan of blocks:
1 block of 64448 bytes in file 1
End of File mark.
2 blocks of 64448 bytes in file 2
End of File mark.
3 blocks of 64448 bytes in file 3
End of File mark.
1 block of 64448 bytes in file 4
End of File mark.
Total files=4, blocks=7, bytes = 451,136
End scanning the tape.
We should be in file 4. I am at file 4. This is correct!
The above Bareos scan should have output identical to what follows.
Please double check it ...
=== Sample correct output ===
1 block of 64448 bytes in file 1
End of File mark.
2 blocks of 64448 bytes in file 2
End of File mark.
3 blocks of 64448 bytes in file 3
End of File mark.
1 block of 64448 bytes in file 4
End of File mark.
Total files=4, blocks=7, bytes = 451,136
=== End sample correct output ===
If the above scan output is not identical to the
sample output, you MUST correct the problem
or Bareos will not be able to write multiple Jobs to
the tape.
=== Write, backup, and re-read test ===
I'm going to write three records and an EOF
then backup over the EOF and re-read the last record.
Bareos does this after writing the last block on the
tape to verify that the block was written correctly.
This is not an *essential* feature ...
btape: btape.c:586-0 Rewound "tape01"
(/dev/tape/by-id/scsi-1IBM_ULTRIUM-TD4_1310071621-nst)
btape: btape.c:823-0 Wrote first record of 64412 bytes.
btape: btape.c:834-0 Wrote second record of 64412 bytes.
btape: btape.c:845-0 Wrote third record of 64412 bytes.
btape: btape.c:616-0 Wrote 1 EOF to "tape01"
(/dev/tape/by-id/scsi-1IBM_ULTRIUM-TD4_1310071621-nst)
btape: btape.c:861-0 Backspaced over EOF OK.
btape: btape.c:866-0 Backspace record OK.
btape: btape.c:884-0
Block re-read correct. Test succeeded!
=== End Write, backup, and re-read test ===
=== Forward space files test ===
This test is essential to Bareos.
I'm going to write five files then test forward spacing
btape: btape.c:586-0 Rewound "tape01"
(/dev/tape/by-id/scsi-1IBM_ULTRIUM-TD4_1310071621-nst)
btape: btape.c:1928-0 Wrote one record of 64412 bytes.
btape: btape.c:1930-0 Wrote block to device.
btape: btape.c:616-0 Wrote 1 EOF to "tape01"
(/dev/tape/by-id/scsi-1IBM_ULTRIUM-TD4_1310071621-nst)
btape: btape.c:1928-0 Wrote one record of 64412 bytes.
btape: btape.c:1930-0 Wrote block to device.
btape: btape.c:1928-0 Wrote one record of 64412 bytes.
btape: btape.c:1930-0 Wrote block to device.
btape: btape.c:616-0 Wrote 1 EOF to "tape01"
(/dev/tape/by-id/scsi-1IBM_ULTRIUM-TD4_1310071621-nst)
btape: btape.c:1928-0 Wrote one record of 64412 bytes.
btape: btape.c:1930-0 Wrote block to device.
btape: btape.c:1928-0 Wrote one record of 64412 bytes.
btape: btape.c:1930-0 Wrote block to device.
btape: btape.c:1928-0 Wrote one record of 64412 bytes.
btape: btape.c:1930-0 Wrote block to device.
btape: btape.c:616-0 Wrote 1 EOF to "tape01"
(/dev/tape/by-id/scsi-1IBM_ULTRIUM-TD4_1310071621-nst)
btape: btape.c:1928-0 Wrote one record of 64412 bytes.
btape: btape.c:1930-0 Wrote block to device.
btape: btape.c:1928-0 Wrote one record of 64412 bytes.
btape: btape.c:1930-0 Wrote block to device.
btape: btape.c:616-0 Wrote 1 EOF to "tape01"
(/dev/tape/by-id/scsi-1IBM_ULTRIUM-TD4_1310071621-nst)
btape: btape.c:1928-0 Wrote one record of 64412 bytes.
btape: btape.c:1930-0 Wrote block to device.
btape: btape.c:616-0 Wrote 1 EOF to "tape01"
(/dev/tape/by-id/scsi-1IBM_ULTRIUM-TD4_1310071621-nst)
btape: btape.c:586-0 Rewound "tape01"
(/dev/tape/by-id/scsi-1IBM_ULTRIUM-TD4_1310071621-nst)
btape: btape.c:1655-0 Now forward spacing 1 file.
We should be in file 1. I am at file 1. This is correct!
btape: btape.c:1667-0 Now forward spacing 2 files.
We should be in file 3. I am at file 3. This is correct!
btape: btape.c:586-0 Rewound "tape01"
(/dev/tape/by-id/scsi-1IBM_ULTRIUM-TD4_1310071621-nst)
btape: btape.c:1680-0 Now forward spacing 4 files.
We should be in file 4. I am at file 4. This is correct!
btape: btape.c:1698-0 Now forward spacing 1 more file.
We should be in file 5. I am at file 5. This is correct!
=== End Forward space files test ===
Ah, I see you have an autochanger configured.
To test the autochanger you must have a blank tape
that I can write on in Slot 1.
Do you wish to continue with the Autochanger test? (y/n): y
=== Autochanger test ===
3301 Issuing autochanger "loaded" command.
Slot 4 loaded. I am going to unload it.
3302 Issuing autochanger "unload 4 0" command.
unload status=OK 0
3303 Issuing autochanger "load 1 0" command.
3303 Autochanger "load 1 0" status is OK.
btape: btape.c:484-0 open device "tape01"
(/dev/tape/by-id/scsi-1IBM_ULTRIUM-TD4_1310071621-nst): OK
btape: btape.c:1585-0 Rewound "tape01"
(/dev/tape/by-id/scsi-1IBM_ULTRIUM-TD4_1310071621-nst)
btape: btape.c:1592-0 Wrote EOF to "tape01"
(/dev/tape/by-id/scsi-1IBM_ULTRIUM-TD4_1310071621-nst)
The test autochanger worked!!
Regards,
OJK
--
You received this message because you are subscribed to the Google Groups
"bareos-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To post to this group, send email to [email protected].
For more options, visit https://groups.google.com/d/optout.
