Try bareos-17.2.4 from download.bareos.org. There have been a bug with
block sizes in earlier versions (and "[ 6.252610] st 6:0:3:0: [st0]
Block limits 1 - 16777215 bytes." may points to that).
On 10.01.2018 at 11:14 wrote Maciej Piasecki:
> I can't writing in my Ultrim 960
>
> "Bareos requires the nst devices so / dev / nst0 instead of / dev / st0. Shoe"
>
> I tested all devices
>
> "I'm not sure, if this solves the problem. You also get the btape test
> program. Have you installed the bareos-storage-tape package?"
>
>
> Of course
> I testing configuration with dir (debian) and file
> In email is attached config
>
> from console...
>
>
> root@desk1:/etc/amanda# less /etc/bareos/bareos-sd.conf
> root@desk1:/etc/amanda# btape -v -c /etc/bareos/bareos-sd.conf LTO3
> Tape block granularity is 1024 bytes.
> btape: butil.c:274-0 Using device: "LTO3" for writing.
> .
> .
> <long waiting>
> .
> .
> ^C
>
> root@desk1:/etc# ^C
> root@desk1:/etc# ^C
> root@desk1:/etc# ^C
> root@desk1:/etc# ^C
> root@desk1:/etc# ^C
> root@desk1:/etc# btape -v -c /etc/bareos/bareos-sd.conf LTO3
> Tape block granularity is 1024 bytes.
> btape: butil.c:274-0 Using device: "LTO3" for writing.
> ^C
> root@desk1:/etc#
> root@desk1:/etc# dmesg |grep nst
> [ 7.135053] xc2028 2-0061: creating new instance
> root@desk1:/etc# dmesg |grep st0
> [ 0.894625] scsi host0: ahci
> [ 5.756608] st 6:0:3:0: Attached scsi tape st0
> [ 5.756612] st 6:0:3:0: st0: try direct i/o: yes (alignment 512 B)
> [ 6.252610] st 6:0:3:0: [st0] Block limits 1 - 16777215 bytes.
> root@desk1:/etc#
> root@desk1:/etc#
>
>
>
> Scanning SCSI subsystem for new devices
> Scanning host 0 for SCSI target IDs 0 1 2 3 4 5 6 7, all LUNs
> Scanning for device 0 0 0 0 ...
> OLD: Host: scsi0 Channel: 00 Id: 00 Lun: 00
> Vendor: ATA Model: KINGSTON SV300S3 Rev: BBF0
> Type: Direct-Access ANSI SCSI revision: 05
> Scanning host 1 for SCSI target IDs 0 1 2 3 4 5 6 7, all LUNs
> Scanning for device 1 0 0 0 ...
> OLD: Host: scsi1 Channel: 00 Id: 00 Lun: 00
> Vendor: ATA Model: WDC WD10EZRX-00A Rev: 1A01
> Type: Direct-Access ANSI SCSI revision: 05
> Scanning host 2 for SCSI target IDs 0 1 2 3 4 5 6 7, all LUNs
> Scanning host 3 for SCSI target IDs 0 1 2 3 4 5 6 7, all LUNs
> Scanning for device 3 0 0 0 ...
> OLD: Host: scsi3 Channel: 00 Id: 00 Lun: 00
> Vendor: PIONEER Model: BD-RW BDR-207M Rev: 1.21
> Type: CD-ROM ANSI SCSI revision: 05
> Scanning host 4 for SCSI target IDs 0 1 2 3 4 5 6 7, all LUNs
> Scanning host 5 for SCSI target IDs 0 1 2 3 4 5 6 7, all LUNs
> Scanning host 6 for SCSI target IDs 0 1 2 3 4 5 6 7, all LUNs
> Scanning for device 6 0 3 0 ...
> OLD: Host: scsi6 Channel: 00 Id: 03 Lun: 00
> Vendor: HP Model: Ultrium 3-SCSI Rev: G66D
> Type: Sequential-Access ANSI SCSI revision: 03
>
>
> My SD config in file (for test - default in Debian config is directory from
> files)
>
>
>
>
> -------------
>
> #
> # Default Bareos Storage Daemon Configuration file
> #
> # For Bareos release 12.4.4 (12 June 2013) -- suse SUSE Linux Enterprise
> Server 11 (x86_64)
> #
> # You may need to change the name of your tape drive
> # on the "Archive Device" directive in the Device
> # resource. If you change the Name and/or the
> # "Media Type" in the Device resource, please ensure
> # that dird.conf has corresponding changes.
> #
>
> Storage { # definition of myself
> Name = bareos-storage-sd
> Maximum Concurrent Jobs = 20
>
> # remove comment in next line to load plugins from specified directory
> # Plugin Directory = /usr/lib64/bareos/plugins
> }
>
> #
> # List Directors who are permitted to contact Storage daemon
> #
> Director {
> Name = bareos-dir
> Password = "ZknJYcTKtHNuCCmc7c827hQVKWT5RKyEhw+tI7PTJ7nv"
> }
>
> #
> # Restricted Director, used by tray-monitor to get the
> # status of the storage daemon
> #
> Director {
> Name = bareos-storage-mon
> Password = "ZknJYcTKtHNuCCmc7c827hQVKWT5RKyEhw+tI7PTJ7nv"
> Monitor = yes
> }
>
> #
> # Note, for a list of additional Device templates please
> # see the directory <bareos-source>/examples/devices
> # Or follow the following link:
> #
> http://bareos.svn.sourceforge.net/viewvc/bareos/trunk/bareos/examples/devices/
> #
>
> #
> # Devices supported by this Storage daemon
> # To connect, the Director's bareos-dir.conf must have the
> # same Name and MediaType.
> #
>
> Device {
> Name = FileStorage
> Media Type = File
> Archive Device = /var/lib/bareos/storage
> LabelMedia = yes; # lets Bareos label unlabeled media
> Random Access = Yes;
> AutomaticMount = yes; # when device opened, read it
> RemovableMedia = no;
> AlwaysOpen = no;
> }
>
> #
> # An autochanger device with two drives
> #
> #Autochanger {
> # Name = Autochanger
> # Device = Drive-1
> # Device = Drive-2
> # Changer Command = "/usr/lib/bareos/scripts/mtx-changer %c %o %S %a %d"
> # Changer Device = /dev/sg0
> #}
>
> #Device {
> # Name = Drive-1 #
> .....
> #Device {
> # Name = Drive-2 #
> # Drive Index = 1
> # Media Type = DLT-8000
> ...
> #
> # A Linux or Solaris LTO-2 tape drive
> #
> #Device {
> # Name = LTO-2
> # Media Type = LTO-2
> ....
>
> #
> # A Linux or Solaris LTO-3 tape drive
> #
> Device {
> Name = LTO3
> Media Type = LTO-3
> Archive Device = /dev/st0
> AutomaticMount = yes; # when device opened, read it
> AlwaysOpen = yes;
> RemovableMedia = yes;
> RandomAccess = no;
> Maximum File Size = 4GB
> Changer Command = "/usr/lib/bareos/scripts/mtx-changer %c %o %S %a %d"
> # Changer Device = /dev/sg0
> AutoChanger = no
> # Enable the Alert command only if you have the mtx package loaded
> # Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
> # If you have smartctl, enable this, it has more info than tapeinfo
> # Alert Command = "sh -c 'smartctl -H -l error %c'"
> }
>
> #
> # A Linux or Solaris LTO-4 tape drive
> #
> #Device {
> # Name = LTO-4
> # Media Type = LTO-4
> ....
>
> #
> # A FreeBSD tape drive
> #
> #Device {
> # Name = DDS-4
> # Description = "DDS-4 for FreeBSD"
> ....
>
> #
> # Send all messages to the Director,
> # mount messages also are sent to the email address
> #
> Messages {
> Name = Standard
> director = bareos-dir = all
> }
>
--
Jörg Steffens [email protected]
Bareos GmbH & Co. KG Phone: +49 221 630693-91
http://www.bareos.com Fax: +49 221 630693-10
Sitz der Gesellschaft: Köln | Amtsgericht Köln: HRA 29646
Komplementär: Bareos Verwaltungs-GmbH
Geschäftsführer:
S. Dühr, M. Außendorf, Jörg Steffens, P. Storz
--
You received this message because you are subscribed to the Google Groups
"bareos-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To post to this group, send email to [email protected].
For more options, visit https://groups.google.com/d/optout.
