Am Donnerstag, 15. Februar 2018 12:39:27 UTC+1 schrieb Dan: > Ludwig - > > Before running the 2nd backup, check the volume state and see if it is marked > as 'expired'. If not, then with your configuration the 2nd backup should > fail and report that the volume is full. > > The retention time of the volume is set when the volume is created, so if you > changed the retention time in the Pool after this volume was created, that > would explain why it is not expiring. You can update the volume to make sure > it is properly set. Alternatively you can set maximum volumes to 2 and test > again to see if it properly expires the 2nd volume.
Hi Dan, thanks for your replay. The volume has "Full" als volstatus. The volretention show a value of "60". It has been created with this value and there have been no manual actual of mine. "recycle" is set to "1". Everything looks fine, but "Full" does not go away. If I set it to "purged", everything is going on and the backup finishes successfully. I try it with 2 volumes and give a report. Thank you very much, Ludwig -- You received this message because you are subscribed to the Google Groups "bareos-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. For more options, visit https://groups.google.com/d/optout.
