I have a backup job that is backing up S3 objects to tape and I am trying to 
backup a 10TB bucket to a set of tapes. I have all of my tapes labeled and 
assigned to a Tapes pool. After some time the tape fills up and it looks like 
bareos is trying to span the job to another tap but it seems that no matter 
what tape is chosen the job doesn't seem to continue::



-------------------------------------------------------------
25-Mar 23:34 bareos-sd JobId 139: Writing spooled data to Volume. Despooling 
10,240,000,027,997 bytes ...
26-Mar 07:18 bareos-sd JobId 139: End of Volume "026049L7" at 5:13737173 on 
device "DRV1B" (/dev/st0). Write of 64512 bytes got -1.
26-Mar 07:18 bareos-sd JobId 139: Re-read of last block succeeded.
26-Mar 07:18 bareos-sd JobId 139: End of medium on Volume "026049L7" 
Bytes=6,006,212,222,976 Blocks=93,102,247 at 26-Mar-2018 07:18.
26-Mar 07:18 bareos-sd JobId 139: 3307 Issuing autochanger "unload slot 30, 
drive 0" command.
26-Mar 07:20 bareos-sd JobId 139: 3304 Issuing autochanger "load slot 2, drive 
1" command.
26-Mar 07:21 bareos-sd JobId 139: 3305 Autochanger "load slot 2, drive 1", 
status is OK.
26-Mar 07:21 bareos-sd JobId 139: Please mount append Volume "026041L7" or 
label a new one for:
    Job:          backup-genomel-buckets.2018-03-20_13.20.29_10
    Storage:      "DRV1B" (/dev/st0)
    Pool:         Tapes
    Media type:   LTO-7
26-Mar 08:21 bareos-sd JobId 139: Please mount append Volume "026041L7" or 
label a new one for:
    Job:          backup-genomel-buckets.2018-03-20_13.20.29_10
    Storage:      "DRV1B" (/dev/st0)
    Pool:         Tapes
    Media type:   LTO-7


----------------------------------------------------------


When I unmount and remount the tape with label 026041L7 nothing seems to 
happen. I must be doing something wrong but I'm not sure. Can anyone point me 
in the right direction? I was under the impression that if I assign the tapes 
to the same pool any job using that pool can span the tapes of that pool. Is 
this incorrect?

-- 
You received this message because you are subscribed to the Google Groups 
"bareos-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
To post to this group, send email to [email protected].
For more options, visit https://groups.google.com/d/optout.

Reply via email to