It is easier to not disable TLS as long as you do not need to monitor
the network messages in cleartext or you have critical performance
issues. Everything will work out of the box with TLS-PSK.
If you really don't want TLS at all you have to adapt all the configs
mentioned in the documentation before, including the console, director,
storage and all clients.
Am 17.06.19 um 16:58 schrieb Dakota Pilot:
Thank you.
I just did it in the director daemon. So I need to do it in all daemons on the
server then - director, file, storage. I assume I put it in the
bareos-dir.conf, the bareos-fd.d/director/bareos-dir.conf and the same for
storage?
Do I also need to put the TLS Enable = no in the clients? I assume not as one
of the clients (Windows 10) works fine without me setting anything up.
At some point I'll enable TLS but for now while testing I'm leaving it off.
--
Mit freundlichen Grüßen
Frank Ueberschar [email protected]
Bareos GmbH & Co. KG Phone: +49 221 63 06 93-88
http://www.bareos.com Fax: +49 221 63 06 93-10
Sitz der Gesellschaft: Köln | Amtsgericht Köln: HRA 29646
Geschäftsführer: Stephan Dühr, M. Außendorf, J. Steffens, P. Storz
--
You received this message because you are subscribed to the Google Groups
"bareos-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To post to this group, send email to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/bareos-users/fc783f3e-6867-8a67-f45a-eff6cfd76d3f%40bareos.com.
For more options, visit https://groups.google.com/d/optout.
