After desperad hours of googling I Found this solution
Remove any labels from tapes by running
mt -f /dev/nst0 rewind
mt -f /dev/nst0 weof
for each tape.
Witch I reproduced on my own system
mtx /dev/sg6 list 0 /dev/nst0 0
root@bareos-cintrol:~# /usr/lib/bareos/scripts/mtx-changer /dev/sg6 list 0
/dev/nst0 0
1:SU0001L1
2:SU0002L1
3:SU0003L1
4:SU0004L1
5:SU0005L1
6:SU0008L1
7:SU0007L1
8:SU0009L1
9:SU0010L1
10:SU0011L1
11:SU0012L1
12:SU0013L1
13:SU0014L1
14:SU0015L1
17:000008L1
18:000007L1
19:000006L1
20:000005L1
21:000004L1
22:000003L1
23:000001L1
24:SU0022L1
25:SU0021L1
26:SU0020L1
27:SU0019L1
28:SU0017L1
29:SU0016L1
/usr/lib/bareos/scripts/mtx-changer /dev/sg6 load 1 /dev/nst0 0
Loading media from Storage Element 1 into drive 0...done
root@bareos-cintrol:~# mt -f /dev/nst0 rewind
root@bareos-cintrol:~# mt -f /dev/nst0 weof
/usr/lib/bareos/scripts/mtx-changer /dev/sg6 unload 1 /dev/nst0 0
*status slots
Automatically selected Storage: Tape
Automatically selected Catalog: MyCatalog
Using Catalog "MyCatalog"
Connecting to Storage daemon Tape at 172.26.16.89:9103 ...
3306 Issuing autochanger "slots" command.
Device "NEO2000" has 30 slots.
Connecting to Storage daemon Tape at 172.26.16.89:9103 ...
3306 Issuing autochanger "listall" command.
Slot | Volume Name | Status | Media Type | Pool
|
------+------------------+-----------+----------------+--------------------------|
1*| SU0001L1 | ? | ? |
? |
2*| SU0002L1 | ? | ? |
? |
3*| SU0003L1 | ? | ? |
? |
4*| SU0004L1 | ? | ? |
? |
5*| SU0005L1 | ? | ? |
? |
6*| SU0008L1 | ? | ? |
? |
7*| SU0007L1 | ? | ? |
? |
8*| SU0009L1 | ? | ? |
? |
9*| SU0010L1 | ? | ? |
? |
10*| SU0011L1 | ? | ? |
? |
11*| SU0012L1 | ? | ? |
? |
12*| SU0013L1 | ? | ? |
? |
13*| SU0014L1 | ? | ? |
? |
14*| SU0015L1 | ? | ? |
? |
15*| ? | ? | ? |
? |
16*| ? | ? | ? |
? |
17*| 000008L1 | ? | ? |
? |
18*| 000007L1 | ? | ? |
? |
19*| 000006L1 | ? | ? |
? |
20*| 000005L1 | ? | ? |
? |
21*| 000004L1 | ? | ? |
? |
22*| 000003L1 | ? | ? |
? |
23*| 000001L1 | ? | ? |
? |
24*| SU0022L1 | ? | ? |
? |
25*| SU0021L1 | ? | ? |
? |
26*| SU0020L1 | ? | ? |
? |
27*| SU0019L1 | ? | ? |
? |
28*| SU0017L1 | ? | ? |
? |
29*| SU0016L1 | ? | ? |
? |
30@| ? | ? | ? |
? |
*label barcodes
Automatically selected Storage: Tape
Connecting to Storage daemon Tape at 172.26.16.89:9103 ...
Select Drive:
1: Drive 0
2: Drive 1
Select drive (1-2): 1
Connecting to Storage daemon Tape at 172.26.16.89:9103 ...
3306 Issuing autochanger "list" command.
The following Volumes will be labeled:
Slot Volume
==============
1 SU0001L1
2 SU0002L1
3 SU0003L1
4 SU0004L1
5 SU0005L1
6 SU0008L1
7 SU0007L1
8 SU0009L1
9 SU0010L1
10 SU0011L1
11 SU0012L1
12 SU0013L1
13 SU0014L1
14 SU0015L1
17 000008L1
18 000007L1
19 000006L1
20 000005L1
21 000004L1
22 000003L1
23 000001L1
24 SU0022L1
25 SU0021L1
26 SU0020L1
27 SU0019L1
28 SU0017L1
29 SU0016L1
Do you want to label these Volumes? (yes|no): 1
Invalid response. You must answer yes or no.
Do you want to label these Volumes? (yes|no): yes
Defined Pools:
1: Scratch
2: Incremental
3: Full
4: Differential
5: B2T-full
Select the Pool (1-5): 5
Connecting to Storage daemon Tape at 172.26.16.89:9103 ...
Sending label command for Volume "SU0001L1" Slot 1 ...
3304 Issuing autochanger "load slot 1, drive 0" command.
3305 Autochanger "load slot 1, drive 0", status is OK.
3000 OK label. VolBytes=64512 Volume="SU0001L1" Device="nst0" (/dev/nst0)
Catalog record for Volume "SU0001L1", Slot 1 successfully created.
Sending label command for Volume "SU0002L1" Slot 2 ...
3307 Issuing autochanger "unload slot 1, drive 0" command.
3304 Issuing autochanger "load slot 2, drive 0" command.
3305 Autochanger "load slot 2, drive 0", status is OK.
3920 Cannot label Volume because it is already labeled: "SU0005L1"
Label command failed for Volume SU0002L1.
Sending label command for Volume "SU0003L1" Slot 3 ...
3307 Issuing autochanger "unload slot 2, drive 0" command.
3304 Issuing autochanger "load slot 3, drive 0" command.
3305 Autochanger "load slot 3, drive 0", status is OK.
3920 Cannot label Volume because it is already labeled: "SU0003L1"
Label command failed for Volume SU0003L1.
Sending label command for Volume "SU0004L1" Slot 4 ...
3307 Issuing autochanger "unload slot 3, drive 0" command.
On Monday, October 7, 2019 at 1:49:53 PM UTC+3, Kiril Churilov wrote:
>
> Hi all,
> I'm trying to configure bareos with tape library Overland2000 with two
> tape drives (old one model).
> All tapes have barcodes on it.
> I'm stack with making volumes on tape library,
> The tape library is used before.
> I don't know what is the condition of all this tapes.
> And I don't know are they all empty or used before.
> I don't know how to erase a tape in a library.
> How to put tape at the start (beginning) before write.
> Can not advance in this area forward
> Googling does not help also.
> Please help me
>
> Some configuration info
> And error log output.
>
> groups
>
> So, some info
>
> Tape library; Overland Neo2000, 2 x LTO 3 drives
>
> uname -a
> Linux bareos-cintrol 4.19.0-5-amd64 #1 SMP Debian 4.19.37-5 (2019-06-19)
> x86_64 GNU/Linux
>
> root@bareos-cintrol:/etc/bareos/bareos-sd.d/storage# lsb_release -a
> No LSB modules are available.
> Distributor ID: Debian
> Description: Debian GNU/Linux 10 (buster)
> Release: 10
> Codename: buster
>
> root@bareos-cintrol:/etc/bareos/bareos-sd.d/storage# sudo dpkg-query -l |
> grep -i bareos
> ii bareos 18.2.5-144.1
> amd64 Backup Archiving Recovery Open Sourced - metapackage
> ii bareos-bconsole 18.2.5-144.1
> amd64 Backup Archiving Recovery Open Sourced - text console
> ii bareos-client 18.2.5-144.1
> amd64 Backup Archiving Recovery Open Sourced - client metapackage
> ii bareos-common 18.2.5-144.1
> amd64 Backup Archiving Recovery Open Sourced - common files
> ii bareos-database-common 18.2.5-144.1
> amd64 Backup Archiving Recovery Open Sourced - common catalog files
> ii bareos-database-postgresql 18.2.5-144.1
> amd64 Backup Archiving Recovery Open Sourced - PostgreSQL backend
> ii bareos-database-tools 18.2.5-144.1
> amd64 Backup Archiving Recovery Open Sourced - database tools
> ii bareos-director 18.2.5-144.1
> amd64 Backup Archiving Recovery Open Sourced - director daemon
> ii bareos-filedaemon 18.2.5-144.1
> amd64 Backup Archiving Recovery Open Sourced - file daemon
> ii bareos-storage 18.2.5-144.1
> amd64 Backup Archiving Recovery Open Sourced - storage daemon
> ii bareos-storage-tape 18.2.5-144.1
> amd64 Backup Archiving Recovery Open Sourced - storage daemon tape
> support
> ii bareos-tools 18.2.5-144.1
> amd64 Backup Archiving Recovery Open Sourced - common tools
> ii bareos-webui 18.2.5-131.1 all
> Backup Archiving Recovery Open Sourced - webui
>
>
> root@bareos-cintrol:/etc/bareos/bareos-sd.d/storage# cat
> /etc/bareos/bareos-dir.d/storage/Tape.conf
> Storage {
> Name = Tape
> Address = 172.26.16.89 # N.B. Use a fully qualified name
> here (do not use "localhost" here).
> Password = "v8QXvRQ5Xvry8PWjh75foohcJSzNl9DfyP8YYz2mq5Jk"
> Device = NEO2000
> Media Type = LTO-3
> Autochanger = Yes
> Maximum Concurrent Jobs = 2
> }
>
>
> root@bareos-cintrol:/etc/bareos/bareos-sd.d/storage# cat
> /etc/bareos/bareos-sd.d/device/Autochanger.conf
> # Autochanger NEO2000 with two LTO-3 drives
> Autochanger {
> Name = "NEO2000"
> Changer Device = /dev/sg6
> Device = nst0
> Device = nst1
> Changer Command = "/usr/lib/bareos/scripts/mtx-changer %c %o %S %a %d"
> }
>
> Device {
> Name = "nst0"
> DeviceType = tape
> Description = "HP Ultrium 3-SCSI LTO-3"
> DriveIndex = 0
> ArchiveDevice = /dev/nst0
> MediaType = LTO-3
> Drive Crypto Enabled = Yes
> Query Crypto Status = Yes
> AutoChanger = yes
> AutomaticMount = yes
> AlwaysOpen = yes
> RemovableMedia = yes
> # LabelMedia = yes
> Autoselect = yes
> RandomAccess = no
> MaximumFileSize = 10GB # default: 1000000000 (1GB)
> Spool Directory = /var/spool/bareos/1
> Maximum Spool Size = 450000000000
> }
>
> Device {
> Name = "nst1"
> DeviceType = tape
> Description = "IBM ULTRIUM-TD3 LTO-3"
> DriveIndex = 1
> ArchiveDevice = /dev/nst1
> MediaType = LTO-3
> Drive Crypto Enabled = Yes
> Query Crypto Status = Yes
> AutoChanger = yes
> AutomaticMount = yes
> AlwaysOpen = yes
> RemovableMedia = yes
> # LabelMedia = yes
> Autoselect = yes
> RandomAccess = no
> MaximumFileSize = 10GB # default: 1000000000 (1GB)
> Spool Directory = /var/spool/bareos/2
> Maximum Spool Size = 450000000000
> }
>
> # cat /etc/bareos/bareos-dir.d/fileset/nas03.conf
>
>
> FileSet {
> Name = "nas03"
> Description = "Backup all regular filesystems, determined by filesystem
> type."
> Include {
> Options {
> Signature = MD5
> OneFS = No
> AclSupport = Yes
> XattrSupport = Yes
> Fs Type = "btrfs"
> Fs Type = "ext2"
> Fs Type = "ext3"
> Fs Type = "ext4"
> Fs Type = "reiserfs"
> Fs Type = "jfs"
> Fs Type = "xfs"
> Fs Type = "zfs"
> }
> File = "/mnt/iscsi_share"
> }
> Exclude {
> File = "/var/lib/bareos"
> File = "/var/lib/bareos/storage"
> File = "/proc"
> File = "/tmp"
> File = "/var/tmp"
> File = "/.journal"
> File = "/.fsck"
> }
> }
>
> root@bareos-cintrol:/etc/bareos/bareos-sd.d/storage# cat
> /etc/bareos/bareos-dir.d/client/nas03.conf
> Client {
> Name = nas03
> Address = 172.16.16.90
> Password = Some_cool_Pass2019
> }
>
>
> root@bareos-cintrol:/etc/bareos/bareos-sd.d/storage# cat
> /etc/bareos/bareos-dir.d/job/nas03-job.conf
> Job {
> Name = nas03-job
> Client = nas03
> JobDefs = nas03DefaultJob
> }
>
> root@bareos-cintrol:/etc/bareos/bareos-sd.d/storage# cat
> /etc/bareos/bareos-dir.d/jobdefs/nas03DefaultJob.conf
> JobDefs {
> Name = "nas03DefaultJob"
> Type = Backup
> Level = Full
> Client = bareos-fd
> FileSet = "nas03" # selftest fileset
> (#13)
> Schedule = "Nightly"
> Storage = Tape
> Messages = Standard
> Pool = B2T-full
> Priority = 10
> Write Bootstrap = "/var/lib/bareos/%c.bsr"
> Full Backup Pool = B2T-full # write Full Backups into
> "Full" Pool (#05)
> }
>
> root@bareos-cintrol:/etc/bareos/bareos-sd.d/storage# cat
> /etc/bareos/bareos-dir.d/schedule/Nightly.conf
> Schedule {
> Name = "Nightly"
> Run = Level=Full Pool=B2T-full Spooldata=yes Priority=11 1st sun at
> 10:20
> }
>
>
> root@bareos-cintrol:/etc/bareos/bareos-sd.d/storage# lsscsi -g
> [0:0:8:0] enclosu DP BACKPLANE 1.05 - /dev/sg0
> [0:2:0:0] disk DELL PERC 5/i 1.03 /dev/sda /dev/sg1
> [0:2:1:0] disk DELL PERC 5/i 1.03 /dev/sdb /dev/sg2
> [1:0:0:0] cd/dvd HL-DT-ST CD-ROM GCR-8240N 1.10 /dev/sr0 /dev/sg3
> [4:0:1:0] tape HP Ultrium 3-SCSI G24H /dev/st0 /dev/sg4
> [4:0:2:0] tape IBM ULTRIUM-TD3 93GP /dev/st1 /dev/sg5
> [4:0:6:0] mediumx OVERLAND NEO Series 0616 /dev/sch0 /dev/sg6
>
> root@bareos-cintrol:~# mtx -f /dev/sg6 status
> Storage Changer /dev/sg6:2 Drives, 30 Slots ( 1 Import/Export )
> Data Transfer Element 0:Empty
> Data Transfer Element 1:Empty
> Storage Element 1:Full :VolumeTag=SU0001L1
> Storage Element 2:Full :VolumeTag=SU0002L1
> Storage Element 3:Full :VolumeTag=SU0003L1
> Storage Element 4:Full :VolumeTag=SU0004L1
> Storage Element 5:Full :VolumeTag=SU0005L1
> Storage Element 6:Full :VolumeTag=SU0008L1
> Storage Element 7:Full :VolumeTag=SU0007L1
> Storage Element 8:Full :VolumeTag=SU0009L1
> Storage Element 9:Full :VolumeTag=SU0010L1
> Storage Element 10:Full :VolumeTag=SU0011L1
> Storage Element 11:Full :VolumeTag=SU0012L1
> Storage Element 12:Full :VolumeTag=SU0013L1
> Storage Element 13:Full :VolumeTag=SU0014L1
> Storage Element 14:Full :VolumeTag=SU0015L1
> Storage Element 15:Empty
> Storage Element 16:Empty
> Storage Element 17:Full :VolumeTag=000008L1
> Storage Element 18:Full :VolumeTag=000007L1
> Storage Element 19:Full :VolumeTag=000006L1
> Storage Element 20:Full :VolumeTag=000005L1
> Storage Element 21:Full :VolumeTag=000004L1
> Storage Element 22:Full :VolumeTag=000003L1
> Storage Element 23:Full :VolumeTag=000001L1
> Storage Element 24:Full :VolumeTag=SU0022L1
> Storage Element 25:Full :VolumeTag=SU0021L1
> Storage Element 26:Full :VolumeTag=SU0020L1
> Storage Element 27:Full :VolumeTag=SU0019L1
> Storage Element 28:Full :VolumeTag=SU0017L1
> Storage Element 29:Full :VolumeTag=SU0016L1
> Storage Element 30 IMPORT/EXPORT:Empty
>
> *status storage
> The defined Storage resources are:
> 1: Tape
> 2: File
> Select Storage resource (1-2): 1
> Connecting to Storage daemon Tape at bareos-cintrol:9103
>
> bareos-sd Version: 18.2.5 (30 January 2019) Linux-4.4.92-6.18-default
> debian Debian GNU/Linux 9.7 (stretch)
> Daemon started 03-Oct-19 04:47. Jobs: run=0, running=0, bareos.org build
> binary
> Heap: heap=249,856 smbytes=41,370 max_bytes=133,865 bufs=119 max_bufs=122
> Sizes: boffset_t=8 size_t=8 int32_t=4 int64_t=8 mode=0 bwlimit=0kB/s
>
> Running Jobs:
> No Jobs running.
> ====
>
> Jobs waiting to reserve a drive:
> ====
>
> Terminated Jobs:
> JobId Level Files Bytes Status Finished Name
> ===================================================================
> 92 Full 69 789.2 K OK 26-Sep-19 21:10 BackupCatalog
> 93 Incr 0 0 OK 27-Sep-19 21:00
> backup-bareos-fd
> 94 Full 69 803.3 K OK 27-Sep-19 21:10 BackupCatalog
> 95 Diff 0 0 OK 28-Sep-19 21:00
> backup-bareos-fd
> 96 Incr 0 0 OK 30-Sep-19 21:00
> backup-bareos-fd
> 97 Full 69 820.6 K OK 30-Sep-19 21:10 BackupCatalog
> 98 Incr 0 0 OK 01-Oct-19 21:00
> backup-bareos-fd
> 99 Full 69 834.8 K OK 01-Oct-19 21:10 BackupCatalog
> 100 Incr 0 0 OK 02-Oct-19 21:00
> backup-bareos-fd
> 101 Full 69 848.9 K OK 02-Oct-19 21:10 BackupCatalog
> ====
>
> Device status:
> Autochanger "NEO2000" with devices:
> "nst0" (/dev/nst0)
> "nst1" (/dev/nst1)
>
> Device "nst0" (/dev/nst0) is not open.
> Drive 0 is not loaded.
> ==
>
> Device "nst1" (/dev/nst1) is not open.
> Drive 1 is not loaded.
> ==
> ====
>
> Used Volume status:
> ====
>
> ====
>
> You have messages.
> *status slots storage=Tape
> Automatically selected Catalog: MyCatalog
> Using Catalog "MyCatalog"
> Connecting to Storage daemon Tape at bareos-cintrol:9103 ...
> 3306 Issuing autochanger "slots" command.
> Device "NEO2000" has 30 slots.
> Connecting to Storage daemon Tape at bareos-cintrol:9103 ...
> 3306 Issuing autochanger "listall" command.
> Slot | Volume Name | Status | Media Type | Pool
> |
>
> ------+------------------+-----------+----------------+--------------------------|
> 1*| SU0001L1 | ? | ? |
> ? |
> 2*| SU0002L1 | ? | ? |
> ? |
> 3*| SU0003L1 | ? | ? |
> ? |
> 4*| SU0004L1 | ? | ? |
> ? |
> 5*| SU0005L1 | ? | ? |
> ? |
> 6*| SU0008L1 | ? | ? |
> ? |
> 7*| SU0007L1 | ? | ? |
> ? |
> 8*| SU0009L1 | ? | ? |
> ? |
> 9*| SU0010L1 | ? | ? |
> ? |
> 10*| SU0011L1 | ? | ? |
> ? |
> 11*| SU0012L1 | ? | ? |
> ? |
> 12*| SU0013L1 | ? | ? |
> ? |
> 13*| SU0014L1 | ? | ? |
> ? |
> 14*| SU0015L1 | ? | ? |
> ? |
> 15*| ? | ? | ? |
> ? |
> 16*| ? | ? | ? |
> ? |
> 17*| 000008L1 | ? | ? |
> ? |
> 18*| 000007L1 | ? | ? |
> ? |
> 19*| 000006L1 | ? | ? |
> ? |
> 20*| 000005L1 | ? | ? |
> ? |
> 21*| 000004L1 | ? | ? |
> ? |
> 22*| 000003L1 | ? | ? |
> ? |
> 23*| 000001L1 | ? | ? |
> ? |
> 24*| SU0022L1 | ? | ? |
> ? |
> 25*| SU0021L1 | ? | ? |
> ? |
> 26*| SU0020L1 | ? | ? |
> ? |
> 27*| SU0019L1 | ? | ? |
> ? |
> 28*| SU0017L1 | ? | ? |
> ? |
> 29*| SU0016L1 | ? | ? |
> ? |
> 30@| ? | ? | ? |
> ? |
> *
>
>
> *update slots storage=Tape
> Automatically selected Catalog: MyCatalog
> Using Catalog "MyCatalog"
> Connecting to Storage daemon Tape at bareos-cintrol:9103 ...
> 3306 Issuing autochanger "list" command.
> Volume "SU0001L1" not found in catalog. Slot=1 InChanger set to zero.
> Volume "SU0002L1" not found in catalog. Slot=2 InChanger set to zero.
> Volume "SU0003L1" not found in catalog. Slot=3 InChanger set to zero.
> Volume "SU0004L1" not found in catalog. Slot=4 InChanger set to zero.
> Volume "SU0005L1" not found in catalog. Slot=5 InChanger set to zero.
> Volume "SU0008L1" not found in catalog. Slot=6 InChanger set to zero.
> Volume "SU0007L1" not found in catalog. Slot=7 InChanger set to zero.
> Volume "SU0009L1" not found in catalog. Slot=8 InChanger set to zero.
> Volume "SU0010L1" not found in catalog. Slot=9 InChanger set to zero.
> Volume "SU0011L1" not found in catalog. Slot=10 InChanger set to zero.
> Volume "SU0012L1" not found in catalog. Slot=11 InChanger set to zero.
> Volume "SU0013L1" not found in catalog. Slot=12 InChanger set to zero.
> Volume "SU0014L1" not found in catalog. Slot=13 InChanger set to zero.
> Volume "SU0015L1" not found in catalog. Slot=14 InChanger set to zero.
> Volume "000008L1" not found in catalog. Slot=17 InChanger set to zero.
> Volume "000007L1" not found in catalog. Slot=18 InChanger set to zero.
> Volume "000006L1" not found in catalog. Slot=19 InChanger set to zero.
> Volume "000005L1" not found in catalog. Slot=20 InChanger set to zero.
> Volume "000004L1" not found in catalog. Slot=21 InChanger set to zero.
> Volume "000003L1" not found in catalog. Slot=22 InChanger set to zero.
> Volume "000001L1" not found in catalog. Slot=23 InChanger set to zero.
> Volume "SU0022L1" not found in catalog. Slot=24 InChanger set to zero.
> Volume "SU0021L1" not found in catalog. Slot=25 InChanger set to zero.
> Volume "SU0020L1" not found in catalog. Slot=26 InChanger set to zero.
> Volume "SU0019L1" not found in catalog. Slot=27 InChanger set to zero.
> Volume "SU0017L1" not found in catalog. Slot=28 InChanger set to zero.
> Volume "SU0016L1" not found in catalog. Slot=29 InChanger set to zero.
>
>
> *mount storage=Tape
> Connecting to Storage daemon Tape at bareos-cintrol:9103 ...
> Select Drive:
> 1: Drive 0
> 2: Drive 1
> Select drive (1-2): 1
> Enter autochanger slot: 1
> Connecting to Storage daemon Tape at bareos-cintrol:9103 ...
> 3304 Issuing autochanger "load slot 1, drive 0" command.
> 3305 Autochanger "load slot 1, drive 0", status is OK.
> 3001 Mounted Volume: SU0001L1
> 3001 Device "nst0" (/dev/nst0) is already mounted with Volume "SU0001L1"
>
>
> *umount storage=Tape
> Select Drive:
> 1: Drive 0
> 2: Drive 1
> Select drive (1-2): 1
> Connecting to Storage daemon Tape at bareos-cintrol:9103 ...
> 3307 Issuing autochanger "unload slot 1, drive 0" command.
>
> release storage=Tape
>
>
>
>
> *list volumes
> Using Catalog "MyCatalog"
> Pool: Scratch
> No results to list.
> Pool: Incremental
>
> +---------+------------------+-----------+---------+----------+----------+--------------+---------+------+-----------+-----------+---------------------+---------+
> | mediaid | volumename | volstatus | enabled | volbytes | volfiles |
> volretention | recycle | slot | inchanger | mediatype | lastwritten
> | storage |
>
> +---------+------------------+-----------+---------+----------+----------+--------------+---------+------+-----------+-----------+---------------------+---------+
> | 2 | Incremental-0002 | Append | 1 | 474,545 | 0
> | 2,592,000 | 1 | 0 | 0 | File | 2019-10-04
> 21:00:02 | File |
>
> +---------+------------------+-----------+---------+----------+----------+--------------+---------+------+-----------+-----------+---------------------+---------+
> Pool: Full
>
> +---------+------------+-----------+---------+-------------+----------+--------------+---------+------+-----------+-----------+---------------------+---------+
> | mediaid | volumename | volstatus | enabled | volbytes | volfiles |
> volretention | recycle | slot | inchanger | mediatype | lastwritten
> | storage |
>
> +---------+------------+-----------+---------+-------------+----------+--------------+---------+------+-----------+-----------+---------------------+---------+
> | 1 | Full-0001 | Append | 1 | 245,662,176 | 0 |
> 31,536,000 | 1 | 0 | 0 | File | 2019-10-05 21:00:02
> | File |
>
> +---------+------------+-----------+---------+-------------+----------+--------------+---------+------+-----------+-----------+---------------------+---------+
> Pool: Differential
>
> +---------+-------------------+-----------+---------+----------+----------+--------------+---------+------+-----------+-----------+---------------------+---------+
> | mediaid | volumename | volstatus | enabled | volbytes | volfiles
> | volretention | recycle | slot | inchanger | mediatype | lastwritten
> | storage |
>
> +---------+-------------------+-----------+---------+----------+----------+--------------+---------+------+-----------+-----------+---------------------+---------+
> | 3 | Differential-0003 | Append | 1 | 3,213 | 0
> | 7,776,000 | 1 | 0 | 0 | File | 2019-09-28
> 21:00:03 | File |
>
> +---------+-------------------+-----------+---------+----------+----------+--------------+---------+------+-----------+-----------+---------------------+---------+
> Pool: B2T-full
> No results to list.
>
>
> *list pools
> Automatically selected Catalog: MyCatalog
> Using Catalog "MyCatalog"
> +--------+--------------+---------+---------+----------+---------------+
> | poolid | name | numvols | maxvols | pooltype | labelformat |
> +--------+--------------+---------+---------+----------+---------------+
> | 1 | Scratch | 0 | 0 | Scratch | * |
> | 2 | Incremental | 1 | 100 | Backup | Incremental- |
> | 3 | Full | 1 | 100 | Backup | Full- |
> | 4 | Differential | 1 | 100 | Backup | Differential- |
> | 5 | B2T-full | 0 | 100 | Backup | Vol |
> +--------+--------------+---------+---------+----------+---------------+
> *
>
>
> *run
> Automatically selected Catalog: MyCatalog
> Using Catalog "MyCatalog"
> A job name must be specified.
> The defined Job resources are:
> 1: RestoreFiles
> 2: nas03-job
> 3: BackupCatalog
> 4: backup-bareos-fd
> Select Job resource (1-4): 2
> Run Backup job
> JobName: nas03-job
> Level: Full
> Client: nas03
> Format: Native
> FileSet: nas03
> Pool: B2T-full (From Job FullPool override)
> Storage: Tape (From Pool resource)
> When: 2019-10-07 02:13:10
> Priority: 10
> OK to run? (yes/mod/no): yes
> Job queued. JobId=110
> *status job=110
> Job "110" is not running.
> You have messages.
> *messages
> 07-Oct 02:13 bareos-dir JobId 110: Start Backup JobId 110,
> Job=nas03-job.2019-10-07_02.13.13_05
> 07-Oct 02:13 bareos-dir JobId 110: Connected Storage daemon at
> 172.26.16.89:9103, encryption: TLS_CHACHA20_POLY1305_SHA256
> 07-Oct 02:13 bareos-dir JobId 110: Using Device "nst0" to write.
> 07-Oct 02:13 bareos-dir JobId 110: Probing client protocol... (result will
> be saved until config reload)
> 07-Oct 02:13 bareos-dir JobId 110: Connected Client: nas03 at
> 172.16.16.90:9102, encryption: PSK-AES256-CBC-SHA
> 07-Oct 02:13 bareos-dir JobId 110: Handshake: Immediate TLS
> 07-Oct 02:13 nas03-fd JobId 110: Connected Storage daemon at
> 172.26.16.89:9103, encryption: PSK-AES256-CBC-SHA
> 07-Oct 02:13 nas03-fd JobId 110: Extended attribute support is enabled
> 07-Oct 02:13 nas03-fd JobId 110: ACL support is enabled
> 07-Oct 02:13 bareos-sd JobId 110: Job nas03-job.2019-10-07_02.13.13_05 is
> waiting. Cannot find any appendable volumes.
> Please use the "label" command to create a new Volume for:
> Storage: "nst0" (/dev/nst0)
> Pool: B2T-full
> Media type: LTO-3
> *
> *
> *label
> The defined Storage resources are:
> 1: Tape
> 2: File
> Select Storage resource (1-2): 1
> Connecting to Storage daemon Tape at 172.26.16.89:9103 ...
> Select Drive:
> 1: Drive 0
> 2: Drive 1
> Select drive (1-2): 1
> Enter new Volume name: SU0001L1
> Enter slot (0 or Enter for none):
> Defined Pools:
> 1: Scratch
> 2: Incremental
> 3: Full
> 4: Differential
> 5: B2T-full
> Select the Pool (1-5): 5
> Connecting to Storage daemon Tape at 172.26.16.89:9103 ...
> Sending label command for Volume "SU0001L1" Slot 0 ...
> No slot defined in catalog (slot=0) for Volume "" on "nst0" (/dev/nst0).
> Cartridge change or "update slots" may be required.
> 3910 Unable to open device ""nst0" (/dev/nst0)":
> ERR=backends/generic_tape_device.cc:146 Unable to open device "nst0"
> (/dev/nst0): ERR=No medium found
>
> Label command failed for Volume SU0001L1.
> Do not forget to mount the drive!!!
>
>
> Label command failed for Volume SU0001L1.
> Do not forget to mount the drive!!!
> *update slots
> Automatically selected Storage: Tape
> Connecting to Storage daemon Tape at 172.26.16.89:9103 ...
> 3306 Issuing autochanger "slots" command.
> Device "NEO2000" has 30 slots.
> Connecting to Storage daemon Tape at 172.26.16.89:9103 ...
> 3306 Issuing autochanger "list" command.
> Volume "SU0001L1" not found in catalog. Slot=1 InChanger set to zero.
> Volume "SU0002L1" not found in catalog. Slot=2 InChanger set to zero.
> Volume "SU0003L1" not found in catalog. Slot=3 InChanger set to zero.
> Volume "SU0004L1" not found in catalog. Slot=4 InChanger set to zero.
> Volume "SU0005L1" not found in catalog. Slot=5 InChanger set to zero.
> Volume "SU0008L1" not found in catalog. Slot=6 InChanger set to zero.
> Volume "SU0007L1" not found in catalog. Slot=7 InChanger set to zero.
> Volume "SU0009L1" not found in catalog. Slot=8 InChanger set to zero.
> Volume "SU0010L1" not found in catalog. Slot=9 InChanger set to zero.
> Volume "SU0011L1" not found in catalog. Slot=10 InChanger set to zero.
> Volume "SU0012L1" not found in catalog. Slot=11 InChanger set to zero.
> Volume "SU0013L1" not found in catalog. Slot=12 InChanger set to zero.
> Volume "SU0014L1" not found in catalog. Slot=13 InChanger set to zero.
> Volume "SU0015L1" not found in catalog. Slot=14 InChanger set to zero.
> Volume "000008L1" not found in catalog. Slot=17 InChanger set to zero.
> Volume "000007L1" not found in catalog. Slot=18 InChanger set to zero.
> Volume "000006L1" not found in catalog. Slot=19 InChanger set to zero.
> Volume "000005L1" not found in catalog. Slot=20 InChanger set to zero.
> Volume "000004L1" not found in catalog. Slot=21 InChanger set to zero.
> Volume "000003L1" not found in catalog. Slot=22 InChanger set to zero.
> Volume "000001L1" not found in catalog. Slot=23 InChanger set to zero.
> Volume "SU0022L1" not found in catalog. Slot=24 InChanger set to zero.
> Volume "SU0021L1" not found in catalog. Slot=25 InChanger set to zero.
> Volume "SU0020L1" not found in catalog. Slot=26 InChanger set to zero.
> Volume "SU0019L1" not found in catalog. Slot=27 InChanger set to zero.
> Volume "SU0017L1" not found in catalog. Slot=28 InChanger set to zero.
> Volume "SU0016L1" not found in catalog. Slot=29 InChanger set to zero.
>
>
>
>
> *status client
> The defined Client resources are:
> 1: nas03
> 2: bareos-fd
> Select Client (File daemon) resource (1-2): 1
> Connecting to Client nas03 at 172.16.16.90:9102
> Handshake: Immediate TLS, Encryption: PSK-AES256-CBC-SHA
>
> nas03-fd Version: 18.2.5 (30 January 2019) Linux-4.4.92-6.18-default
> redhat CentOS Linux release 7.6.1810 (Core)
> Daemon started 20-Aug-19 15:42. Jobs: run=0 running=1, bareos.org build
> binary
> Heap: heap=36,864 smbytes=66,243 max_bytes=66,437 bufs=315 max_bufs=317
> Sizeof: boffset_t=8 size_t=8 debug=0 trace=0 bwlimit=0kB/s
>
> Running Jobs:
> JobId 110 Job nas03-job.2019-10-07_02.13.13_05 is running.
> Full Backup Job started: 07-Oct-19 12:13
> Files=0 Bytes=0 Bytes/sec=0 Errors=0
> Bwlimit=0
> Files Examined=0
> SDReadSeqNo=5 fd=5
> JobId 111 Job nas03-job.2019-10-07_02.40.11_07 is running.
> Full Backup Job started: 07-Oct-19 12:40
> Files=0 Bytes=0 Bytes/sec=0 Errors=0
> Bwlimit=0
> Files Examined=0
> SDReadSeqNo=5 fd=7
> bareos-dir (director) connected at: 07-Oct-19 12:41
> ====
>
> Terminated Jobs:
> ====
>
> Running Jobs:
> Writing: Full Backup job nas03-job JobId=110 Volume=""
> pool="B2T-full" device="nst0" (/dev/nst0)
> spooling=0 despooling=0 despool_wait=0
> Files=0 Bytes=0 AveBytes/sec=0 LastBytes/sec=0
> FDReadSeqNo=6 in_msg=6 out_msg=4 fd=5
> Writing: Full Backup job nas03-job JobId=111 Volume=""
> pool="B2T-full" device="nst0" (/dev/nst0)
> spooling=0 despooling=0 despool_wait=0
> Files=0 Bytes=0 AveBytes/sec=0 LastBytes/sec=0
> FDReadSeqNo=6 in_msg=6 out_msg=4 fd=7
> ====
>
> Jobs waiting to reserve a drive:
> ====
>
> Terminated Jobs:
> ====
>
> Device status:
> Autochanger "NEO2000" with devices:
> "nst0" (/dev/nst0)
> "nst1" (/dev/nst1)
>
> Device "nst0" (/dev/nst0) is not open.
> Device is BLOCKED waiting to create a volume for:
> Pool: B2T-full
> Media type: LTO-3
> Drive 0 is not loaded.
> ==
>
> Device "nst1" (/dev/nst1) is not open.
> Drive 1 is not loaded.
> ==
> ====
>
> Used Volume status:
> ====
>
> ====
>
>
>
>
>
--
You received this message because you are subscribed to the Google Groups
"bareos-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/bareos-users/b45ab081-62b0-4a23-9bb6-8e99a4efa066%40googlegroups.com.
