I'm a bit confused about what follows.
1) I wonder why in the GUI sometimes I am able to see under "Storages"
my volumes and sometimes not which is actually the case (see
print-screen). I would like to see the infos of my volumes, but actually
no chance via the GUI.
2) I thought that incremental level is writing into incremental-Volume,
full level is writing into full-Volume etc. But it is not. Why?
Level Type Pri Name Volume
=============================================================
Incremental Backup 10 vm25-linux Full-0031
Incremental Backup 10 backup-bareos-fd Incremental-0269
Full Backup 11 BackupCatalog Incremental-0269
Pool {
Name = Full
Pool Type = Backup
Recycle = yes
Maximum Volume Bytes = 500 G
Maximum Volumes = 300
Label Format = "Full-"
AutoPrune = yes
Volume Retention = 180 days
Job Retention = 179 days
File Retention = 178 days
}
Pool {
Name = Incremental
Pool Type = Backup
Recycle = yes
AutoPrune = yes
Volume Retention = 28 days
Job Retention = 27 days
File Retention = 26 days
Maximum Volume Bytes = 100G
Maximum Volumes = 400
Label Format = "Incremental-"
}
Thank you for any help!
Regards,
Birgit
--
You received this message because you are subscribed to the Google Groups
"bareos-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/bareos-users/31a80ba7-5de8-a30c-8271-9a12f301c9e3%40unifr.ch.
