On Wednesday, June 17, 2020 at 6:20:08 PM UTC-6, Jim Oltman wrote: > > I've recently completed the config for Bareos. I've got a Dell tape > library on a VM with a passthrough SAS card. I've completed a backup > across several tapes. I'm now trying to restore a file or 2 to verify the > backup. I'm seeing the following on my Restore job: > > bareos-sd JobId 16: Error: backends/generic_tape_device.cc:141 Unable to > open device "Dell-TL2000-Drive1" > (/dev/tape/by-id/scsi-35000e1114216d004-nst): ERR=No medium found > > If I login to the tape library interface, I see that the correct tape is > loaded, and it's "seeking". It's been "seeking" for over 30 minutes. > These are old tapes, but were used with some other backup software, not > Bacula or Bareos. I created new labels and imported them into Bareos. > > This is the second time I've tried this particular restore. The first > time, the director chose Drive0 (which is the drive that was used during > the backup). However, I forgot I had the mount on the file daemon set as > READONLY. I fixed that and recreated the restore. This time it chose > Drive1. And now I'm seeing the above. What are my next steps of > troubleshooting? Thanks! >
When I shutdown the bareos-sd daemon and run a bls on a tape used in my job, I can see files on that tape. I just can't restore them. I've run the autochanger test on DRIVE0 just fine using the btape utility. I'm not really sure what to do at this point. ANy help would be appreciated. Thank! Jim -- You received this message because you are subscribed to the Google Groups "bareos-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/bareos-users/3b830509-0942-4009-bbf0-74f460cf1ca5o%40googlegroups.com.
