Thanks for the help среда, 24 марта 2021 г. в 15:41:49 UTC+2, andr...@gmail.com:
> I believe the "Max Concurrent" setting is for clients too if you want to > have parallel jobs from the same client. Note that you have the client > resource in the director config set to default value of 1 for "Maximum > Concurrent Jobs" > https://docs.bareos.org/Configuration/Director.html#config-Dir_Client_MaximumConcurrentJobs > > and on the client config you have the same setting set with a default to 20 > https://docs.bareos.org/Configuration/FileDaemon.html#config-Fd_Client_MaximumConcurrentJobs > . > > > If you're writing to tape I think you're better off if you can enable > spooling and make sure you have enough spool capacity to store the full > jobs before they get written to tape unless you have a tape library that > can write to multiple tapes at once and the jobs go to different tapes. If > you're writing to disk or S3/ceph then this does not matter. > > > -- > Andrei > > > On 24/03/2021 01:14, Andrew Feldmann wrote: > > Unless I'm misunderstanding the situation, you do not need to have > multiple storage devices. Bareos can interleave jobs to one or more > devices. > > Check "Max Concurrent" settings for storage devices, storage daemon, and > director. > > > Assuming you start multiple jobs against multiple clients, you should be > able to get more than one job going at the same time. > > > I hope that helps. > > > > On 3/22/21 9:28 AM, 'Jon SCHEWE' via bareos-users wrote: > > You need to have multiple storage devices defined to have multiple jobs > executing at the same time. Bareos can only write one job at a time to each > storage device. > > *Jon Schewe* > > Research Scientist > > > C: +1 612.263.2718 <(612)%20263-2718> > > O: +1 952.545.5720 <(952)%20545-5720> > > *jon.s...@rtx.com* > > > *Raytheon Technologies* > > Raytheon Intelligence & Space > > 5775 Wayzata Blvd. Suite 630 > > St. Louis Park, MN 55416 > > > *RTX.com <https://www.rtx.com/>* | *LinkedIn > <https://www.linkedin.com/company/raytheontechnologies>* | *Twitter > <https://twitter.com/raytheontech>* | *Instagram > <https://www.instagram.com/raytheontechnologies>* > > ------------------------------ > *From:* bareos...@googlegroups.com <bareos...@googlegroups.com> on behalf > of Sergey Zaguba <dedy...@gmail.com> > *Sent:* Monday, March 22, 2021 01:48 > *To:* bareos-users <bareos...@googlegroups.com> > *Subject:* [External] [bareos-users] Parallel tasks > > Bareos 20.0.1 > > in /etc/bareos/bareos-sd.d/storage/bareos-sd.conf > Maximum Concurrent Jobs = 20 > > In the settings of the repository and the director, lithium simultaneous > tasks> 1 are set. But I constantly see that only one task is being > executed, after it the second, etc. > -- > You received this message because you are subscribed to the Google Groups > "bareos-users" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to bareos-users...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/bareos-users/ccd98127-7c74-480b-a54d-19f724292648n%40googlegroups.com > > <https://groups.google.com/d/msgid/bareos-users/ccd98127-7c74-480b-a54d-19f724292648n%40googlegroups.com?utm_medium=email&utm_source=footer> > . > -- > You received this message because you are subscribed to the Google Groups > "bareos-users" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to bareos-users...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/bareos-users/CY1P110MB0167C15A5E672A5D4DA8F81EED659%40CY1P110MB0167.NAMP110.PROD.OUTLOOK.COM > > <https://groups.google.com/d/msgid/bareos-users/CY1P110MB0167C15A5E672A5D4DA8F81EED659%40CY1P110MB0167.NAMP110.PROD.OUTLOOK.COM?utm_medium=email&utm_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "bareos-users" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to bareos-users...@googlegroups.com. > > To view this discussion on the web visit > https://groups.google.com/d/msgid/bareos-users/4038ffc5-2ef8-bb1c-33f7-adfede72052a%40gmail.com > > <https://groups.google.com/d/msgid/bareos-users/4038ffc5-2ef8-bb1c-33f7-adfede72052a%40gmail.com?utm_medium=email&utm_source=footer> > . > > -- You received this message because you are subscribed to the Google Groups "bareos-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to bareos-users+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/bareos-users/6d1882f4-c221-490c-84c6-994618215631n%40googlegroups.com.
