My storage daemon hardware:

Microsemi Adaptec HBA 1100 4i - Speicher-Controller - 4 Sender/Kanal - SATA 
6Gb/s / SAS 12Gb/s Low Profile - 1.2 GBps
Quantum LTO-7 HH - Bandlaufwerk - LTO Ultrium (6 TB / 15 TB) - Ultrium 7 - 
SAS-2 - intern
A separate Seagate IronWolf NAS HDD 4TB, SATA 6Gb/s (ST4000VN008) is used 
for spooling partition only.

The SATA HDD is plugged on the main board's SATA Port. 300 MB/s = 2,4 Gb/s, 
so the 6 Gb/s should be OK.
Taking a look to the last job: Despooling elapsed time = 03:13:27, Transfer 
rate = 99.29 M Bytes/second 

Maybe a solution to plug the HDD directly to the SAS controller?

Thanks for help Wolfgang,
Frank
wd schrieb am Dienstag, 6. April 2021 um 11:06:09 UTC+2:

> Dear Frank,
>
> In message <[email protected]> you wrote:
> >
> > I use Ultrium 7 tapes with 6 / 15 TB storage capacity. So I do expect a 
> > minimum of 6 TB in worst case (without compression).
> ...
> > When I now calclulate the present 2.55 TB + 1,2 TB in queue = 3,75 TB, 
> less 
> > than 6 TB for LTO-7
>
> The spec for LTO 7 gives a sustained data rate of 300 MB/s. Check
> if your storage daemon can feed the drive with such a rate;
> otherwise the drive will run in start-stop mode which is slow, causes
> increased wear on the drive and the tapes, and results in a serious
> degradation of capacity - as you are seeing here.
>
>
> Best regards,
>
> Wolfgang Denk
>
> -- 
> DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
> Phone: (+49)-8142-66989-10 <+49%208142%206698910> Fax: (+49)-8142-66989-80 
> <+49%208142%206698980> Email: [email protected]
> Living on Earth may be expensive, but it includes an annual free trip
> around the Sun.
>

-- 
You received this message because you are subscribed to the Google Groups 
"bareos-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
To view this discussion on the web visit 
https://groups.google.com/d/msgid/bareos-users/b35f044f-ec9b-4fe9-b338-f7ac822e3c4cn%40googlegroups.com.

Reply via email to