97MB/s sounds suspiciously that there is a 1gig network path somewhere between your client and the storage server.
If you run iperf between the host and the server and get > 100MB/s and thus using larger networking, next I would check compression settings, I would also check storage system throughput. Lastly I would go back and re-run the btape testing from the manual to check the performance of your tape path subsystem. Brock Palen [email protected] www.mlds-networks.com Websites, Linux, Hosting, Joomla, Consulting > On Jun 16, 2022, at 2:29 PM, Pete Forde <[email protected]> > wrote: > > We have a Bareos installation with a Scalar I3 library connected and two IBM > LTO7 drives attached by 8G fibre. but we are only seeing the backups run at > 97MB/sec. very slow > > > Pete > > -- > You received this message because you are subscribed to the Google Groups > "bareos-users" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/bareos-users/bbeb9c21-2074-4fb0-9389-345fd81a615en%40googlegroups.com. -- You received this message because you are subscribed to the Google Groups "bareos-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/bareos-users/7D7075C5-3514-4A16-B2B4-CA37427002A8%40mlds-networks.com.
