OK THAT WAS IT
A line needs to be added to /etc/sudoers file to allow the user (or group)
bareos to run the mx-changer script
On Friday, September 29, 2023 at 3:25:12 PM UTC-4 Philip Dalrymple wrote:
> I enabled logging on the mtx-changer script and if I call it from the command
> line I see entries in the log but not if.... Wait I may need to add the user
> bareos to the sudoers
>
>
> Let me try that
>
>
> On Friday, September 29, 2023 at 3:20:31 PM UTC-4 Philip Dalrymple wrote:
>
> > I used bareos at my last company and just installed a qualstar Q40.
> >
> >
> > The mtx-changer command works as I expect but the status slots storage does
> > not
> > (see below)
> >
> >
> > Any Ideas on troubleshoting?
> >
> >
> > my autochanger record is
> >
> >
> > Autochanger {
> > Name = QSTAR
> > Changer Device = /dev/sch0
> > Device = LTO8
> > Changer Command = "/usr/bin/sudo /usr/lib/bareos/scripts/mtx-changer %c %o
> > %S %a %d"
> >
> > }
> >
> >
> >
> > my device record is
> >
> >
> > Device {
> > Name = LTO8
> > Media Type = LTO8
> > Device Type = Tape
> > Archive Device = /dev/st0
> > Label Media = no; # yes for disk
> > Random Access = No;
> > Automatic Mount = yes; # when device opened, read it
> > Removable Media = yes;
> > Always Open = yes;
> > Autochanger = yes;
> > Maximum Concurrent Jobs = 1;
> > Maximum Block Size = 1048576;
> > }
> >
> >
> >
> >
> >
> > -----------------------------mtx-changer
> > ➜ bareos-config git:(main) sudo /usr/lib/bareos/scripts/mtx-changer
> > /dev/sch0 slots
> > 40
> >
> > ➜ bareos-config git:(main) sudo /usr/lib/bareos/scripts/mtx-changer
> > /dev/sch0 listall
> > D:0:E
> > S:1:F:1E0001L8
> > S:2:F:1E0002L8
> > S:3:F:1E0003L8
> > S:4:F:1E0004L8
> > S:5:F:1E0005L8
> > S:6:F:1E0006L8
> > S:7:F:1E0007L8
> > S:8:F:1E0008L8
> > S:9:F:1E0009L8
> > S:10:F:1E0010L8
> > S:11:F:1E0011L8
> > S:12:F:1E0012L8
> > S:13:F:1E0013L8
> > S:14:F:1E0014L8
> > S:15:F:1E0015L8
> > S:16:F:1E0016L8
> > S:17:F:1E0017L8
> > S:18:F:1E0018L8
> > S:19:F:1E0019L8
> > S:20:F:1E0020L8
> > S:21:F:CLN001L1
> > S:22:F:CLN002L1
> > S:23:E
> > S:24:E
> > S:25:E
> > S:26:E
> > S:27:E
> > S:28:E
> > S:29:E
> > S:30:E
> > S:31:E
> > S:32:E
> > S:33:E
> > S:34:E
> > S:35:E
> > I:36:E
> > I:37:E
> > I:38:E
> > I:39:E
> > I:40:E
> >
> >
> >
> > ---------------------------- bconsol
> >
> >
> > status slots storage
> > Automatically selected Storage: bstore-eds1-sd
> > Automatically selected Catalog: MyCatalog
> > Using Catalog "MyCatalog"
> > Connecting to Storage daemon bstore-eds1-sd at bstore-eds1.rhsys.co:9103 ...
> > 3306 Issuing autochanger "slots" command.
> > Device "LTO8" has 0 slots.
> > No slots in changer to scan.
> > *
--
You received this message because you are subscribed to the Google Groups
"bareos-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/bareos-users/0100018ae26b596b-67052503-6633-4310-bc51-c2718a7797f1-000000%40email.amazonses.com.
