I'm doing some PoC testing with a single LTO5 tape drive and individual
LTO5 tapes. I changed tapes to a blank tape before trying to run a 1TB
backup. For some reason BAREOS didn't autolabel the new tape. I tried
manually labeling in the Full pool. Now no matter what trying to run a
manual full backup to tape for that job I just get
Device "HPLTO5" (/dev/nst0) is waiting for sysop intervention:
Volume: bigfile1
Pool: Full
Media type: MLR1
Device is BLOCKED waiting to create a volume for:
Pool: Full
Media type: MLR1
Total Bytes Read=64,512 Blocks Read=1 Bytes/block=64,512
Positioned at File=0 Block=0
I've tried unmounting, resetting/rewinding from bash, I've tried canceling
the job, restarting, etc. I cannot figure out what to do to get BAREOS to
... do anything.
I've used some AI guidance and have checked list media:
21 | bigfile1 | Append | 1 | 64,512 | 1 |
31,536,000 | 1
| 0 | 0 | MLR1 | | HPLTO5 |
But it just always blocks the same way. I'm not sure what to do.
--
You received this message because you are subscribed to the Google Groups
"bareos-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion visit
https://groups.google.com/d/msgid/bareos-users/d15b58d6-2c4c-42c2-b7b2-bd95a30c2b3fn%40googlegroups.com.
