There's a number of factor that can greatly affect speed: In fileset the choice of Signature Algorithm is curcial, we recommend to use xxh128 being far most quicker than md5 having any compression done by the FD will also greatly influence the speed of transfert.
Of course having tuned PG correctly and not using the default 131MB of share memory will help increasing the needed time to insert file record in the db. etc etc... On Thursday, 22 January 2026 at 15:18:03 UTC+1 Patrick Winter wrote: > Hi Bruno, > > I actually missed this setting, and tried setting it up with 200G, as we > use LTO-9, and this already increased the speed a lot. > so i will keep experimenting like this, to bring the best performance > possible. Thank you very much! > > Bruno Friedmann (bruno-at-bareos) schrieb am Mittwoch, 21. Januar 2026 um > 14:36:28 UTC+1: > >> Did you ever check and adjust the Maximum File Size parameter >> >> https://docs.bareos.org/Configuration/StorageDaemon.html#config-Sd_Device_MaximumFileSize >> >> it should be at least bigger than the buffer of your drive >> MaximumFileSize = 100GB >> >> There's also an ongoing discussion about performance and how to measure >> it correctly >> https://github.com/bareos/bareos/discussions/2497 >> >> On Wednesday, 21 January 2026 at 13:03:49 UTC+1 Patrick Winter wrote: >> >>> Hello, >>> >>> I have a LTO - Tape system with 3 drives. >>> the tapes are able to write with 280mb/s, which i can verify. >>> i tested this with a dataset of 500gb of small files, and another test >>> with 1 single 200gb file. (from the same, and a different server, to be >>> sure the network connection doesnt bottle neck.) >>> >>> Also with rsync i get the same speed (around 250-280mb/s) >>> >>> both filesets (the 500gb of small files, and the single 200gb file) are >>> backuped with bareos, with only 100-120 mb/s >>> >>> I already tried to set maximum_block_size to 1M, as i found some hints >>> that this could help. >>> >>> my current device configuration looks like this: >>> >>> Device { >>> Name = Drive-0 >>> DriveIndex = 0 >>> MediaType = LTO >>> ArchiveDevice = /dev/nst1 >>> AutomaticMount = yes >>> RemovableMedia = yes >>> RandomAccess = no >>> Autochanger = yes >>> Maximum Changer Wait = 600 >>> Maximum Open Wait = 600 >>> Maximum Block Size = 1048576 >>> } >>> >>> bareos-dir --version >>> 25.0.2~pre13.add249aa9 >>> >>> >>> >>> Any tips or recommendations are very welcomed. >>> >>> best regards >>> Patrick >>> >>> -- You received this message because you are subscribed to the Google Groups "bareos-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion visit https://groups.google.com/d/msgid/bareos-users/bb690c37-cb2a-480c-88c2-743045f9e614n%40googlegroups.com.
