You can't have both tape device and autochanger pointing to the same scsi 
target here you are using /dev/sg0
Either the changer is sg0 and the drive maybe sg1 

The tape drive should point the the non-streaming device (usually /dev/nst0 
or better to use it's unique id)
/dev/tape/by-id/XXXXX


On Wednesday, 8 April 2026 at 20:50:34 UTC+2 Gregory West wrote:

> I found one issue in the content of the /autochangers dir.   An extra 
> .conf file that should not be there.   File deleted bareos-sd restarted now 
> getting the following error:
> 3910 Unable to open device ""tapedrive-0" (/dev/sg0)": 
> ERR=backends/generic_tape_device.cc:130 Unable to open device "tapedrive-0" 
> (/dev/sg0): ERR=Invalid argument
>
> On Wednesday, April 8, 2026 at 1:43:55 PM UTC-5 Gregory West wrote:
>
>> I am new to Bareos, and using an autochanger.   And yes I am a gluten for 
>> punishment.  I have the following config files (see below).   When I do a  
>> * label -> 2: Tape bconsole seems to just sit there.   Obviously I  have 
>> something wrong in my configs.  I just can not figure what.   Any 
>> assistance would be great.
>>
>> Greg
>> /etc/bareos/bareos-dir.d/storage/Tape.conf
>> Storage {
>>   Name = Tape
>>   Address = backup                # N.B. Use a fully qualified name here 
>> (do not use "localhost" here).
>>   Password = "  the ultra secret password  "
>>   Device = autochanger-0
>>   Media Type = LTO
>>   Auto Changer = yes
>> }
>>
>> /etc/bareos/bareos-sd.d/autochanger/autochanger-0.conf
>> Autochanger {
>> Name = autochanger-0
>> Changer Device = /dev/sg0
>> Device = tapedrive-0
>> Changer Command = "/usr/lib/bareos/scripts/mtx-changer %c %o %S %a %d"
>> }
>>
>> /etc/bareos/bareos-sd.d/device/tapedrives.conf
>> Device {
>>   Name = tapedrive-0
>>   DeviceType = tape
>>   DriveIndex = 0
>>   ArchiveDevice = /dev/sg0
>>   MediaType = LTO
>>   AutoChanger = yes # default: no
>>   AutomaticMount = yes # default: no
>>   MaximumFileSize = 10GB # default: 1000000000 (1GB)
>>   LabelMedia = yes
>>   RemovableMedia = yes
>>   Autoselect = yes
>> }
>>
>

-- 
You received this message because you are subscribed to the Google Groups 
"bareos-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
To view this discussion visit 
https://groups.google.com/d/msgid/bareos-users/35fa1d1d-e13b-4668-a4e1-88568d7a9354n%40googlegroups.com.

Reply via email to