On Tue, Dec 04, 2007 at 12:30:59PM +0000, Miles Sabin wrote: > I have the udev rules installed (via the Fedora 7 RPM), but I still > have to manually run bcharge -o to get sensible results from btool -l > ... without doing that first I get a timeout with the following > message, > > [EMAIL PROTECTED]:~$ btool -l > Usb::Error caught: (-110, No error): Timeout in usb_bulk_read
I looked briefly through my old emails to try to see what model device you have, but I don't think I have that. I do have a lsusb -v output from after bcharge -o, but that doesn't really help, as we know that works. Could you remove the udev rules temporarily, and blacklist usb_storage temporarily (rmmod usb_storage and edit /etc/blacklist-berry_charge, and add "blacklist usb_storage") and then run the following: Plugin device, note the product ID with lsusb. (Probably 0006) Run bcharge manually, no arguments, then note product ID. I'd really like a copy of the lsusb -v output at this point. I also noted in my old emails that you have Windows running under VMware. What kernel are you running, and would you be willing to do some usbfs_snoop captures? I'm running the latest 1.0.4 VMware with a 2.6.22.3 kernel, and it works well. - Chris ------------------------------------------------------------------------- SF.Net email is sponsored by: Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php _______________________________________________ Barry-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/barry-devel
