> > 1) bcharge doesn't run upon plugging in the BB.
>
> This is likely due to your Blackberry having one of the new Product ID's.
> If it is 8004, then the latest CVS should work for you. If it is a
> different product ID, please let me know.
>
> You can check this using "lsusb -v" *before* bcharge runs.
before running bcharge lsusb -v shows:
Bus 006 Device 002: ID 0fca:0006 Research In Motion, Ltd.
MaxPower 100mA
after running bcharge:
Bus 006 Device 003: ID 0fca:0004 Research In Motion, Ltd.
MaxPower 500mA
So the charge gets set correctly, but is the device # and product ID
supposed to change as a result of bcharge?
> > 2) Per the suggestions, I unloaded usb_storage right before running the
> > sync, and at no time was berry_charge loaded. msynctool hangs during the
> > sync. Based on the output it seems process all my contacts and resolve
> > any conflicts, send them to the pearl, and then hang. I've tried wiping
> > all the data from the BB and the sync seems to add all the contacts, no
> > calendar events, and no tasks. In addition it duplicates contact entries
> > that exist in both Evolution and the BB, so it seems to hang after
> > adding all the contacts but before cleaning up any extras. I've also
> > tried deleting the sync group and starting a new one from scratch after
> > failed syncs, but it still seems to hang in the same place.
>
> If you wait for 30 to 60 seconds, does the Barry module quit? Or can
> you wait "forever" and it just sits there?
>
> If Barry times out in 30 seconds, I'd like to see the USB traffic.
> In the Barry plugin configuration, enable the DebugMode setting (just
> comment it out). This should dump lots of protocol info to the
> screen as you sync. I need the last couple of screens of hex output
> when it hangs.
>
> If you can wait "forever", then I'm assuming that OpenSync is hanging
> in its engine somewhere. Can you check the output of 'top' and see if
> osengine or osplugin is taking CPU? If so, set the environment
> variable OSYNC_TRACE to an empty directory, and look at the logs to
> see where they stop. If you want, you can email them to me directly,
> since they can contain private data.
msynctool hangs forever, and osplugin is taking CPU via top. I'll email
the logs to you directly.
-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://sourceforge.net/services/buy/index.php
_______________________________________________
Barry-devel mailing list
Barry-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/barry-devel
