Hi Chris, Thanks a lot for your answer.
Am Samstag, 5. Juli 2008 11:16:28 schrieb [EMAIL PROTECTED]: > On Fri, Jul 04, 2008 at 03:35:07PM +0200, Reinhold Schoeb wrote: > > I am trying to get a BB8800 running with Barry, using Debian Sid amd64 > > and packages from http://www.koppenterprises.net/barry/barry-CVS/ > > > > 1. Bcharge works : > > mebsuta:~# bcharge > > Scanning for Blackberry devices... > > Found device #011...already at 500mA...already in desired Pearl mode...no > > change > > > > 2. Same with btool list devices : > > mebsuta:~# btool -l > > Blackberry devices found: > > Device ID: 0x655fa0. PIN: 253ddd86, Description: RIM 8800 Series Colour > > GPRS Handheld > > Hi Reinhold, > > Good to see the above works. Yes :-) > > 3. Thats what I get with btool -t > > [EMAIL PROTECTED]:~$ btool -t -P password -p 253ddd86 > > Blackberry devices found: > > Device ID: 0x654fa0. PIN: 253ddd86, Description: RIM 8800 Series Colour > > GPRS Handheld > > Using device (PIN): 253ddd86 > > Barry::Error caught: Fewer than 6 password tries remaining in device. > > Refusing to proceed, to avoid device zapping itself. Use a Windows > > client, or re-cradle the device. > > Do you have a Windows machine to test with? If you connect with Windows, > then try on Linux again, does the error go away? I tryed on a Windows system with Desktop Manager. It works, but the problem with btool remains. > Also, does your device allow you to set the number of retries? You might > want to set this to 10 or more. No, I can only choose between 3 til 5. > > 4. And again with the verbose option : > > [EMAIL PROTECTED]:~$ btool -v -t -P asd0w -p 253ddd86 > > usb_set_debug: Setting debugging level to 9 (on) > > usb_os_init: Found USB VFS at /dev/bus/usb > > usb_os_find_busses: Found 002 > > usb_os_find_busses: Found 001 > > usb_os_find_devices: couldn't get connect info > > usb_os_find_devices: Found 001 on 002 > > [snip] > > > usb_release_interface(0x651740,0) > > usb_close(0x651740) > > Barry::Error caught: Bad packet size. Packet: 26. DataSize(): 26. > > Required size: 44 > > Unfortunately, this is a different error than the password one, so I didn't > get to see the raw packet during the password handshake. > > The only known way to fix the Bad packet size error right now, is to > replug the device. Yes, you`re right. After replugging the device I get again the "Fewer than 6 password ..." message. Is there a way to accept 5 password retries ? Reinhold ------------------------------------------------------------------------- Sponsored by: SourceForge.net Community Choice Awards: VOTE NOW! Studies have shown that voting for your favorite open source project, along with a healthy diet, reduces your potential for chronic lameness and boredom. Vote Now at http://www.sourceforge.net/community/cca08 _______________________________________________ Barry-devel mailing list Barry-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/barry-devel
