Took the 2.6.29-rc5 kernel with the configuration from Jaunty and moved
it to my x86_64 system which was running intrepid. Modified Kernel
config to support 64Bit and to move the start address to an even
boundary, but no other changes.
btool -t fails now on that system just as it did on the x86 laptop. And
btool -t runs correctly under gdb.
--
Paul O'Keefe <p...@megabelle.net>
VOIP: 1-770-250-5165
FindMe: 1-678-967-4103
On Sat, 2009-02-21 at 14:26 -0500, Paul O'Keefe wrote:
> Last two messages were held due to length: summary
>
> btool -t fails on 2.6.28 (ubuntu), fails on 2.6.28.7 (vanilla kernel)
> and fails on 2.6.29-rc5 (release candidate) on dual core Pentium in
> SMP mode.
>
> succeeds on same equipment using 2.6.27 series kernel. Probably not in
> the Ubuntu patches since also fails on stock 2.6.28.7 kernel. Could be
> in the config setup that Ubuntu is using through.
>
> Anybody with a working kernel higher than 2.6.28.7 please send me your
> Kernel config file and I will retest. Thx.
> --
> Paul O'Keefe <p...@megabelle.net>
> VOIP: 1-770-250-5165
> FindMe: 1-678-967-4103
>
>
> On Sat, 2009-02-21 at 14:52 +0000, Paul O'Keefe wrote:
>
> > Did not see my msg echo back on the list.
> >
> > Vanilla 2.6.28.7 kernel failed. I had attached my config to the message.
> > Chris, I will send you the config file directly.
> > Sent from my BlackBerry
> >
> > ------------------------------------------------------------------------------
> > Open Source Business Conference (OSBC), March 24-25, 2009, San Francisco, CA
> > -OSBC tackles the biggest issue in open source: Open Sourcing the Enterprise
> > -Strategies to boost innovation and cut costs with open source participation
> > -Receive a $600 discount off the registration fee with the source code: SFAD
> > http://p.sf.net/sfu/XcvMzF8H
> > _______________________________________________
> > Barry-devel mailing list
> > Barry-devel@lists.sourceforge.net
> > https://lists.sourceforge.net/lists/listinfo/barry-devel
>
> ------------------------------------------------------------------------------
> Open Source Business Conference (OSBC), March 24-25, 2009, San Francisco, CA
> -OSBC tackles the biggest issue in open source: Open Sourcing the Enterprise
> -Strategies to boost innovation and cut costs with open source participation
> -Receive a $600 discount off the registration fee with the source code: SFAD
> http://p.sf.net/sfu/XcvMzF8H
> _______________________________________________ Barry-devel mailing list
> Barry-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/barry-devel
------------------------------------------------------------------------------
Open Source Business Conference (OSBC), March 24-25, 2009, San Francisco, CA
-OSBC tackles the biggest issue in open source: Open Sourcing the Enterprise
-Strategies to boost innovation and cut costs with open source participation
-Receive a $600 discount off the registration fee with the source code: SFAD
http://p.sf.net/sfu/XcvMzF8H
_______________________________________________
Barry-devel mailing list
Barry-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/barry-devel
