I forgot to mention that the reason for the this failure is described in diagnostic as “CLIR not subscribed”. At each call setup there is a “CLIR invocation” although in the mobile.cfg file it is set to “no clir”. How can I remove this condition in LCR ?
Best regards, Robert, On Feb 22, 2016, at 10:57 AM, robert <[email protected]> wrote: > > HI, > > When I try to route calls, the osmo phone which is connected to the real > network starts initiating the call but then immediately releases the > connection with the following cause “Requested facility not subscribed”. Does > anyone know what is causing this error ? > > Best regards, > Robert, > > > > On Feb 14, 2016, at 10:13 PM, Harald Welte <[email protected]> wrote: > >> On Sat, Feb 13, 2016 at 09:31:02AM +0100, Tomcsányi Domonkos wrote: >>> As far as I know osmocomBB doesn’t have a SIP sink yet, you’d need to >>> create the code for that. >> >> You can connect OsmocomBB via its MNCC interface to LCR as a gsm-ms >> channel. This is similar to attaching OsmoNITB via its MNCC interface >> as a gsm-bs channel to LCR. >> >> So it should be no problem to connect both OsmoNITB and OsmocomBB >> simultaneously to a single LCR instance and route calls vice-versa. >> >> -- >> - Harald Welte <[email protected]> http://laforge.gnumonks.org/ >> ============================================================================ >> "Privacy in residential applications is a desirable marketing option." >> (ETSI EN 300 175-7 Ch. A6) >
