I'm using CP2102 with apprx 1 m stereo cable. I create another jack with shorter cable and still the same error. I have cp2102 and Pl 2303 and has the same resut. My last suspect is the phone. My phone is C118 made in china. Is that any limitations on specified region that support osmocom ?
On Dec 3, 2017 6:35 PM, "Tomcsányi, Domonkos" <d...@tomcsanyi.net> wrote: > Hi, > > Length of the cable and the type of serial adapter can also cause some > issues. > > What adapter are you using? > > Cheers, > Domi > > > 2017. dec. 3. dátummal, 12:09 időpontban Felix Angga <felan...@gmail.com> > írta: > > Yes I've tried using xor and without xor. > I'm running on bare hardware. Linux mint 18. > Do I need to configure baud rate? Or the default 115200 should be OK? > Hmm okay, i'll try on other computer. > > Btw, will it be affected with the length of the cable? > > > On Dec 3, 2017 6:00 PM, "Harald Welte" <lafo...@gnumonks.org> wrote: > > On Sat, Dec 02, 2017 at 10:43:40PM +0700, felan...@gmail.com wrote: > > $ host/osmocon/osmocon -p /dev/ttyUSB0 -m c123xor target/firmware/board/ > > compal_e88/hello_world.compalram.bin -c > > have you tried 'c123' without XOR? Are you running in some kind of VM > or on bare hardware? The timing is very critical, and some combinations > of hardware + drivers + software are not able to fulfill the strict > timing requirements. > > In case of doubt, try using a different computer. > > -- > - Harald Welte <lafo...@gnumonks.org> > http://laforge.gnumonks.org/ > ============================================================ > ================ > "Privacy in residential applications is a desirable marketing option." > (ETSI EN 300 175-7 Ch. > A6) > > >
