I guess, both are serial protocols and the hardware adaptor takes care of legit default serial values. Still the problem is to find a free available usb port for communication:( Will have to test and see:)
Nikos On Tue, May 15, 2018 at 7:02 AM, Nikos Balkanas <nbalka...@gmail.com> wrote: > Ty Craig, > > I'll try it for myself before changing anything:) > > I'm surprised, however, that osmocon can work like that. RS232 interfaces > need different initialization (baud rate, stop bits, parity, etc) that usb > doesn't understant! > > Nikos > > On Tue, May 15, 2018 at 5:24 AM, Craig Comstock < > cr...@unreasonablefarm.org> wrote: > >> Hi Nikos, >> >> > Planning to add usb support to osmocon. >> > Is there any interest for a patch, or should I do it just for myself? >> > >> > PS: You can convert a USB port to serial with a USB2serial converter:) >> >> Exactly. I have mostly used a USB to serial adapter without modifying >> osmocom-bb code at all. At one point I also built osmocom-bb natively on a >> raspberry-pi and was able to operate that way to some extent. >> >> -Craig >> > >