Did you try the analog line on a phone with a callerid display Just to be sure the callerid is provided on the line.
Julien -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] g] On Behalf Of Tomoya Yoshida Sent: April 13, 2005 4:30 AM To: [email protected] Subject: [Bayonne-devel] About the method of acquiring caller ID Hi all Please teach the method of acquiring the caller ID at inbound. I am using the "D41JCT-LS" board. The line is an analog network of Japan. Middleware uses bayonne. The following sample scripts were made, and the acquisition of the caller ID at inbound was executed actually. ---------------------------------------------------------------- <test.scr> answer.intercom slog.info "1 %session.callerid slog.info "2 %session.calledid slog.info "3 %pstn.clid slog.info "4 %pstn.dnid exit ---------------------------------------------------------------- However, all information becomes "UNKNOWN" as for the result. Are another some settings necessary to acquire caller ID? For instance, "/etc/bayonne.conf", "/etc/bayonne.sched", and "/usr/dialogic/cfg/dialogic.cfg", etc. Please teach the setting method by all means when succeeding in the acquisition of caller ID comes. There is no thing that it is not possible to acquire it because it is a line in Japan. Please my best regards. _______________________________________________ Bayonne-devel mailing list [email protected] http://lists.gnu.org/mailman/listinfo/bayonne-devel _______________________________________________ Bayonne-devel mailing list [email protected] http://lists.gnu.org/mailman/listinfo/bayonne-devel
