I get those XMIT errors after the calc_nrssi_slope in periodic_work1. Yesterday, mb__ found a bug in those function (wrong radio_write offsets), but even if now it's fixed, I get the error. I have only tried scanning, and works. Maybe something wrong in the specs ?
[ 5546.438429] bcm43xx driver 0.0.1 [ 5546.440858] ACPI: PCI Interrupt Link [LNK3] enabled at IRQ 17 [ 5546.441002] GSI 22 sharing vector 0xE1 and IRQ 22 [ 5546.441081] ACPI: PCI Interrupt 0000:02:02.0[A] -> Link [LNK3] -> GSI 17 (level, low) -> IRQ 225 [ 5546.441237] bcm43xx: Chip ID 0x4306, rev 0x3 [ 5546.441314] bcm43xx: Number of cores: 5 [ 5546.441382] bcm43xx: Core 0: ID 0x800, rev 0x4, vendor 0x4243, enabled [ 5546.441462] bcm43xx: Core 1: ID 0x812, rev 0x5, vendor 0x4243, disabled [ 5546.441542] bcm43xx: Core 2: ID 0x80d, rev 0x2, vendor 0x4243, enabled [ 5546.441622] bcm43xx: Core 3: ID 0x807, rev 0x2, vendor 0x4243, disabled [ 5546.441702] bcm43xx: Core 4: ID 0x804, rev 0x9, vendor 0x4243, enabled [ 5546.443227] bcm43xx: PHY connected [ 5546.443303] bcm43xx: Detected PHY: Version: 2, Type 2, Revision 2 [ 5546.443395] bcm43xx: Detected Radio: ID: 2205017f (Manuf: 17f Ver: 2050 Rev: 2) [ 5546.443470] bcm43xx: Led Status: 1: 0 2: 0 3: 0 4: 0 [ 5546.443551] bcm43xx: Radio turned off [ 5546.443620] bcm43xx: Radio turned off [ 5550.057674] bcm43xx: PHY connected [ 5550.603391] bcm43xx: InitVals written [ 5550.612357] bcm43xx: Radio turned on [ 5550.628630] bcm43xx: FIXME: Possibly broken code in bcm43xx_phy_setupg() at /root/driver/bcm43xx_phy.c:333 [ 5550.787343] bcm43xx: Chip initialized [ 5550.788363] bcm43xx: DMA initialized [ 5550.788456] bcm43xx: 80211 cores initialized [ 5561.254422] eth1: no IPv6 routers present [periodic_work1 call] [ 5611.265836] bcm43xx: XMIT ERROR [ 5611.265840] bcm43xx: Generic Reason: 0x00004880 [ 5611.265844] bcm43xx: DMA reasons: 0x00000000, 0x00000000, 0x00000000, 0x00000000 [ 5611.265848] bcm43xx: DMA TX status: 0x00002000, 0x02802028, 0x00002000, 0x00002000 [periodic_work1 call] [ 5671.867238] bcm43xx: XMIT ERROR [ 5671.867242] bcm43xx: Generic Reason: 0x00004880 [ 5671.867246] bcm43xx: DMA reasons: 0x00000000, 0x00000000, 0x00000000, 0x00000000 [ 5671.867250] bcm43xx: DMA TX status: 0x00002000, 0x02802028, 0x00002000, 0x00002000 [and so on...forever] [ 5719.835138] bcm43xx: Radio turned off [ 5719.909466] ACPI: PCI interrupt for device 0000:02:02.0 disabled _______________________________________________ Bcm43xx-dev mailing list [email protected] http://lists.berlios.de/mailman/listinfo/bcm43xx-dev
