On 4/2/06, Bin Zhang <[EMAIL PROTECTED]> wrote: > On 4/1/06, Thomas Ploch <[EMAIL PROTECTED]> wrote: > > Hello all, > > > > Written by Bin Zhang: > > > > >With the very good surprise, it works with WPA and in a simple way: > > >the only thing to do is to modprobe bcm43xx and to configure > > >wpa_supplicant, I don't need to make the other iwconfig or iwlist. > > > > > >With the debian unstable (wpasupplicant 0.4.8-1), I put in > > >/etc/network/interfaces > > >iface eth1 inet dhcp > > > wpa-conf/home/user/.wpa/wpa_supplicant.conf > > > pre-up modprobe bcm43xx > > > post-down modprobe -r bcm43xx > > >and use "ifup/ifdown eth1". > > > > > Yes, its pretty easy that way, I can even get an IP-Address on boot, > > the only thing that is concerning me, is that with wpa_supplicant, I dont > > get more > > than 24 kb/s on a __16Mb__ line. Is there a possible explanantion for that? > > > > I have just discovered that I have also this problem. I get about > 35kb/s with softmac. (I can get about 145 kb/s with dscape, it's the > max on my adsl line). >
bcm43xx in 2.6.17-rc1 (with a boot patch http://lists.debian.org/debian-powerpc/2006/04/msg00085.html) works very well. It sets (__automatically__) rate to 11M/s. The rate=54M still has 30kb/s. Best regards, Bin _______________________________________________ Bcm43xx-dev mailing list [email protected] http://lists.berlios.de/mailman/listinfo/bcm43xx-dev
