Hi...maybe someone can help me here. I'm running the latest and greatest from wireless-dev-git.
I am using WPA w/AES encryption, and I am able to get connected w/wpa_supplicant. However, if I send files out through scp, for example, the speed starts out decently but immediately starts slowing down, eventually stalling. At this point the driver seems to be in some locked state as I can not rmmod it and try again...my only recourse is a reboot. Here is what comes out of the dmesg: bcm43xx_d80211 driver ACPI: PCI Interrupt Link [LNK3] enabled at IRQ 11 ACPI: PCI Interrupt 0000:02:02.0[A] -> Link [LNK3] -> GSI 11 (level, low) -> IRQ 11 bcm43xx_d80211: Chip ID 0x4306, rev 0x3 bcm43xx_d80211: Number of cores: 5 bcm43xx_d80211: Core 0: ID 0x800, rev 0x4, vendor 0x4243, enabled bcm43xx_d80211: Core 1: ID 0x812, rev 0x5, vendor 0x4243, disabled bcm43xx_d80211: Core 2: ID 0x80d, rev 0x2, vendor 0x4243, enabled bcm43xx_d80211: Core 3: ID 0x807, rev 0x2, vendor 0x4243, disabled bcm43xx_d80211: Core 4: ID 0x804, rev 0x9, vendor 0x4243, enabled bcm43xx_d80211: PHY connected bcm43xx_d80211: Detected PHY: Version: 2, Type 2, Revision 2 bcm43xx_d80211: Detected Radio: ID: 2205017f (Manuf: 17f Ver: 2050 Rev: 2) bcm43xx_d80211: Radio turned off bcm43xx_d80211: Radio turned off wmaster0: Selected rate control algorithm 'simple' bcm43xx_d80211: Virtual interface added (type: 0x00000002, ID: 5, MAC: 00:90:4b:5d:ae:6a) bcm43xx_d80211: PHY connected bcm43xx_d80211: Radio turned on bcm43xx_d80211: Chip initialized bcm43xx_d80211: DMA initialized bcm43xx_d80211: Keys cleared bcm43xx_d80211: Selected 802.11 core (phytype 2) wmaster0: Does not support passive scan, disabled wlan0: starting scan wlan0: scan completed wlan0: Initial auth_alg=0 wlan0: authenticate with AP xx:xx:xx:xx:xx:xx wlan0: RX authentication from xx:xx:xx:xx:xx:xx (alg=0 transaction=2 status=0) wlan0: authenticated wlan0: associate with AP xx:xx:xx:xx:xx:xx wlan0: RX AssocResp from xx:xx:xx:xx:xx:xx (capab=0x431 status=0 aid=3) wlan0: associated wlan0: no IPv6 routers present wlan0: CCMP decrypt failed for RX frame from xx:xx:xx:xx:xx:xx wlan0: RX deauthentication from xx:xx:xx:xx:xx:xx (reason=16) wlan0: deauthenticated wlan0: RX deauthentication from xx:xx:xx:xx:xx:xx (reason=7) wlan0: RX deauthentication from xx:xx:xx:xx:xx:xx (reason=7) wlan0: RX deauthentication from xx:xx:xx:xx:xx:xx (reason=7) wlan0: RX deauthentication from xx:xx:xx:xx:xx:xx (reason=7) wlan0: RX deauthentication from xx:xx:xx:xx:xx:xx (reason=7) wlan0: RX deauthentication from xx:xx:xx:xx:xx:xx (reason=7) wlan0: RX deauthentication from xx:xx:xx:xx:xx:xx (reason=7) wlan0: RX deauthentication from xx:xx:xx:xx:xx:xx (reason=7) wlan0: RX deauthentication from xx:xx:xx:xx:xx:xx (reason=7) wlan0: RX deauthentication from xx:xx:xx:xx:xx:xx (reason=7) wlan0: RX deauthentication from xx:xx:xx:xx:xx:xx (reason=7) wlan0: RX deauthentication from xx:xx:xx:xx:xx:xx (reason=7) wlan0: RX deauthentication from xx:xx:xx:xx:xx:xx (reason=7) wlan0: RX deauthentication from xx:xx:xx:xx:xx:xx (reason=7) wlan0: RX deauthentication from xx:xx:xx:xx:xx:xx (reason=7) wlan0: RX deauthentication from xx:xx:xx:xx:xx:xx (reason=7) wlan0: RX deauthentication from xx:xx:xx:xx:xx:xx (reason=7) wlan0: RX deauthentication from xx:xx:xx:xx:xx:xx (reason=7) wlan0: RX deauthentication from xx:xx:xx:xx:xx:xx (reason=7) wlan0: RX deauthentication from xx:xx:xx:xx:xx:xx (reason=7) wlan0: RX deauthentication from xx:xx:xx:xx:xx:xx (reason=7) wlan0: RX deauthentication from xx:xx:xx:xx:xx:xx (reason=7) wlan0: RX deauthentication from xx:xx:xx:xx:xx:xx (reason=7) wlan0: RX deauthentication from xx:xx:xx:xx:xx:xx (reason=7) wlan0: RX deauthentication from xx:xx:xx:xx:xx:xx (reason=7) wlan0: RX deauthentication from xx:xx:xx:xx:xx:xx (reason=7) wlan0: RX deauthentication from xx:xx:xx:xx:xx:xx (reason=7) wlan0: RX deauthentication from xx:xx:xx:xx:xx:xx (reason=7) wlan0: RX deauthentication from xx:xx:xx:xx:xx:xx (reason=7) wlan0: starting scan wlan0: scan completed wlan0: Initial auth_alg=0 wlan0: authenticate with AP xx:xx:xx:xx:xx:xx wlan0: RX authentication from xx:xx:xx:xx:xx:xx (alg=0 transaction=2 status=0) wlan0: authenticated wlan0: associate with AP xx:xx:xx:xx:xx:xx wlan0: RX ReassocResp from xx:xx:xx:xx:xx:xx (capab=0x431 status=0 aid=3) wlan0: associated wlan0: RX deauthentication from xx:xx:xx:xx:xx:xx (reason=15) wlan0: deauthenticated wlan0: RX deauthentication from xx:xx:xx:xx:xx:xx (reason=7) Then it just repeats from the "wlan0: starting scan" 11 lines up...over and over and over. Any thoughts? _______________________________________________ Bcm43xx-dev mailing list [email protected] http://bat.berlios.de/mailman/listinfo/bcm43xx-dev
