On Sun, Aug 06, 2006 at 02:09:17PM -0400, Adam Jacob Muller wrote:
> Does it work if you disable DHCP?
No, even with a static address no network traffic goes through.
"iwconfig" show that the AP is identified but the "link quality" is at
0:
wlan0 IEEE 802.11b/g ESSID:"pAartiGa" Nickname:"Broadcom 4306"
Mode:Managed Frequency=2.437 GHz Access Point:
00:13:46:42:06:EC
Bit Rate=11 Mb/s Tx-Power=15 dBm
RTS thr:off Fragment thr:off
Encryption key:EDAD-EBEF-AFCE-DDEA-BDEE-FFCA-DE
Security mode:restricted
Link Quality:0 Signal level:0 Noise level:0
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid
frag:0
Tx excessive retries:0 Invalid misc:0 Missed
beacon:0
Thanks for your help,
> Adam
>
> On Aug 6, 2006, at 8:39 AM, Louis-David Mitterrand wrote:
>
> >Hello,
> >
> >Using debian unstable with kernel-source-2.6.17-5 my wlan0 does not go
> >beyond:
> >
> > Aug 6 14:28:41 styx firmware.agent[10453]: /sys//class/firmware/
> >0000:03:03.0/ does not exist
> > Aug 6 14:28:42 styx dhclient: Listening on LPF/
> >wlan0/00:11:f5:20:78:3d
> > Aug 6 14:28:42 styx dhclient: Sending on LPF/
> >wlan0/00:11:f5:20:78:3d
> > Aug 6 14:28:42 styx dhclient: Sending on Socket/fallback
> > Aug 6 14:28:44 styx dhclient: DHCPDISCOVER on wlan0 to
> >255.255.255.255 port 67 interval 5
> > Aug 6 14:28:49 styx dhclient: DHCPDISCOVER on wlan0 to
> >255.255.255.255 port 67 interval 5
> > Aug 6 14:28:54 styx dhclient: DHCPDISCOVER on wlan0 to
> >255.255.255.255 port 67 interval 13
> >
> >etc.. no dhcp is ever sent (works fine with ndiswrapper).
> >
> >Could that be related to the "/sys/..... does not exist" message ?
> >
> >Thanks,
> >_______________________________________________
> >Bcm43xx-dev mailing list
> >[email protected]
> >http://bat.berlios.de/mailman/listinfo/bcm43xx-dev
> >
>
_______________________________________________
Bcm43xx-dev mailing list
[email protected]
http://bat.berlios.de/mailman/listinfo/bcm43xx-dev
