Hi Larry, the machine boots up fine now, but no network device appears. Hope you can extract some info from the messages. Let me know the next step to take.
Gruß, Jochen -- "In a world without fences and walls, who needs gates and windows?" Das bessere Office kostenlos: http://de.openoffice.org/ Einfach der bessere Browser: http://www.mozilla.com/firefox/all
Module Size Used by radeon 113696 0 drm 63892 1 radeon video 14468 0 thermal 12040 0 fan 4484 0 container 4224 0 button 6032 0 battery 8836 0 ac 4740 0 lp 11272 0 autofs4 19076 0 af_packet 18568 0 capability 4360 0 commoncap 6400 1 capability 8250 22340 0 serial_core 18944 1 8250 powernow_k8 14144 1 freq_table 4896 1 powernow_k8 processor 24264 2 thermal,powernow_k8 usblp 12800 0 rfcomm 35480 0 l2cap 22144 5 rfcomm usbhid 50144 0 hci_usb 16284 0 bluetooth 48228 3 rfcomm,l2cap,hci_usb tsdev 7232 0 bcm43xx 423116 1 psmouse 38664 0 ohci_hcd 19204 0 tpm_infineon 7960 0 tpm 13216 1 tpm_infineon ehci_hcd 30088 0 shpchp 35108 0 pci_hotplug 29768 1 shpchp ssb 11264 1 bcm43xx pcmcia 32572 0 ohci1394 33072 0 ati_agp 8204 0 agpgart 27724 2 drm,ati_agp i2c_piix4 8460 0 parport_pc 37092 0 parport 34120 2 lp,parport_pc evdev 8960 2 serio_raw 6532 0 ieee80211softmac 32128 1 bcm43xx ieee1394 287320 1 ohci1394 sdhci 16652 0 mmc_core 20096 1 sdhci tpm_bios 7040 1 tpm yenta_socket 25228 1 usbcore 114564 6 usblp,usbhid,hci_usb,ohci_hcd,ehci_hcd pcspkr 3584 0 tg3 104964 0 rsrc_nonstatic 12032 1 yenta_socket pcmcia_core 35096 3 pcmcia,yenta_socket,rsrc_nonstatic
lo no wireless extensions. eth0 no wireless extensions.
Sep 6 21:19:48 binux syslogd 1.4.1#18: restart. Sep 6 21:19:48 binux kernel: klogd 1.4.1#18, log source = /proc/kmsg started. Sep 6 21:19:48 binux kernel: : Bus 3, cardbus bridge: 0000:02:04.0 Sep 6 21:19:48 binux kernel: IO window: 00001000-000010ff Sep 6 21:19:48 binux kernel: IO window: 00001400-000014ff Sep 6 21:19:48 binux kernel: PREFETCH window: 50000000-51ffffff Sep 6 21:19:48 binux kernel: MEM window: 54000000-55ffffff Sep 6 21:19:48 binux kernel: PCI: Bridge: 0000:00:14.4 Sep 6 21:19:48 binux kernel: IO window: 1000-1fff Sep 6 21:19:48 binux kernel: MEM window: d4000000-d42fffff Sep 6 21:19:48 binux kernel: PREFETCH window: 50000000-51ffffff Sep 6 21:19:48 binux kernel: ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 20 (level, low) -> IRQ 177 Sep 6 21:19:48 binux kernel: NET: Registered protocol family 2 Sep 6 21:19:48 binux kernel: IP route cache hash table entries: 32768 (order: 5, 131072 bytes) Sep 6 21:19:48 binux kernel: TCP established hash table entries: 131072 (order: 8, 1572864 bytes) Sep 6 21:19:48 binux kernel: TCP bind hash table entries: 65536 (order: 7, 786432 bytes) Sep 6 21:19:48 binux kernel: TCP: Hash tables configured (established 131072 bind 65536) Sep 6 21:19:48 binux kernel: TCP reno registered Sep 6 21:19:48 binux kernel: Machine check exception polling timer started. Sep 6 21:19:48 binux kernel: Total HugeTLB memory allocated, 0 Sep 6 21:19:48 binux kernel: VFS: Disk quotas dquot_6.5.1 Sep 6 21:19:48 binux kernel: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Sep 6 21:19:48 binux kernel: fuse init (API version 7.7) Sep 6 21:19:48 binux kernel: Initializing Cryptographic API Sep 6 21:19:48 binux kernel: io scheduler noop registered Sep 6 21:19:48 binux kernel: io scheduler anticipatory registered (default) Sep 6 21:19:48 binux kernel: io scheduler deadline registered Sep 6 21:19:48 binux kernel: io scheduler cfq registered Sep 6 21:19:48 binux kernel: pcie_portdrv_probe->Dev[5a36:1002] has invalid IRQ. Check vendor BIOS Sep 6 21:19:48 binux kernel: assign_interrupt_mode Found MSI capability Sep 6 21:19:48 binux kernel: pcie_portdrv_probe->Dev[5a37:1002] has invalid IRQ. Check vendor BIOS Sep 6 21:19:48 binux kernel: assign_interrupt_mode Found MSI capability Sep 6 21:19:48 binux kernel: pcie_portdrv_probe->Dev[5a38:1002] has invalid IRQ. Check vendor BIOS Sep 6 21:19:48 binux kernel: assign_interrupt_mode Found MSI capability Sep 6 21:19:48 binux kernel: vesafb: framebuffer at 0xc0000000, mapped to 0xf8880000, using 3072k, total 16384k Sep 6 21:19:48 binux kernel: vesafb: mode is 1024x768x16, linelength=2048, pages=9 Sep 6 21:19:48 binux kernel: vesafb: protected mode interface info at c000:53e6 Sep 6 21:19:48 binux kernel: vesafb: pmi: set display start = c00c5454, set palette = c00c548e Sep 6 21:19:48 binux kernel: vesafb: pmi: ports = 6010 6016 6054 6038 603c 605c 6000 6004 60b0 60b2 60b4 Sep 6 21:19:48 binux kernel: vesafb: scrolling: redraw Sep 6 21:19:48 binux kernel: vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 Sep 6 21:19:48 binux kernel: Console: switching to colour frame buffer device 128x48 Sep 6 21:19:48 binux kernel: fb0: VESA VGA frame buffer device Sep 6 21:19:48 binux kernel: isapnp: Scanning for PnP cards... Sep 6 21:19:48 binux kernel: isapnp: No Plug & Play device found Sep 6 21:19:48 binux kernel: Real Time Clock Driver v1.12ac Sep 6 21:19:48 binux kernel: Floppy drive(s): fd0 is 1.44M Sep 6 21:19:48 binux kernel: floppy0: no floppy controllers found Sep 6 21:19:48 binux kernel: RAMDISK driver initialized: 16 RAM disks of 100000K size 1024 blocksize Sep 6 21:19:48 binux kernel: loop: loaded (max 8 devices) Sep 6 21:19:48 binux kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 Sep 6 21:19:48 binux kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Sep 6 21:19:48 binux kernel: ATIIXP: IDE controller at PCI slot 0000:00:14.1 Sep 6 21:19:48 binux kernel: ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 217 Sep 6 21:19:48 binux kernel: ATIIXP: chipset revision 128 Sep 6 21:19:48 binux kernel: ATIIXP: not 100%% native mode: will probe irqs later Sep 6 21:19:48 binux kernel: ide0: BM-DMA at 0x7040-0x7047, BIOS settings: hda:DMA, hdb:pio Sep 6 21:19:48 binux kernel: ATIIXP: simplex device: DMA disabled Sep 6 21:19:48 binux kernel: ide1: ATIIXP Bus-Master DMA disabled (BIOS) Sep 6 21:19:48 binux kernel: hda: PIONEER DVDRW DVR-K16, ATAPI CD/DVD-ROM drive Sep 6 21:19:48 binux kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Sep 6 21:19:48 binux kernel: hda: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2000kB Cache, DMA Sep 6 21:19:48 binux kernel: Uniform CD-ROM driver Revision: 3.20 Sep 6 21:19:48 binux kernel: 3ware Storage Controller device driver for Linux v1.26.02.001. Sep 6 21:19:48 binux kernel: 3ware 9000 Storage Controller device driver for Linux v2.26.02.007. Sep 6 21:19:48 binux kernel: ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 16 (level, low) -> IRQ 217 Sep 6 21:19:48 binux kernel: ata1: SATA max UDMA/100 cmd 0xF8818080 ctl 0xF881808A bmdma 0xF8818000 irq 217 Sep 6 21:19:48 binux kernel: ata2: SATA max UDMA/100 cmd 0xF88180C0 ctl 0xF88180CA bmdma 0xF8818008 irq 217 Sep 6 21:19:48 binux kernel: scsi0 : sata_sil Sep 6 21:19:48 binux kernel: ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Sep 6 21:19:48 binux kernel: ata1.00: ATA-7, max UDMA/100, 195371568 sectors: LBA48 Sep 6 21:19:48 binux kernel: ata1.00: ata1: dev 0 multi count 16 Sep 6 21:19:48 binux kernel: ata1.00: configured for UDMA/100 Sep 6 21:19:48 binux kernel: scsi1 : sata_sil Sep 6 21:19:48 binux kernel: ata2: SATA link down (SStatus 0 SControl 300) Sep 6 21:19:48 binux kernel: Vendor: ATA Model: FUJITSU MHV2100B Rev: 892C Sep 6 21:19:48 binux kernel: Type: Direct-Access ANSI SCSI revision: 05 Sep 6 21:19:48 binux kernel: SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB) Sep 6 21:19:48 binux kernel: sda: Write Protect is off Sep 6 21:19:48 binux kernel: SCSI device sda: drive cache: write back Sep 6 21:19:48 binux kernel: SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB) Sep 6 21:19:48 binux kernel: sda: Write Protect is off Sep 6 21:19:48 binux kernel: SCSI device sda: drive cache: write back Sep 6 21:19:48 binux kernel: sda: sda1 sda2 sda3 < sda5 sda6 > Sep 6 21:19:48 binux kernel: sd 0:0:0:0: Attached scsi disk sda Sep 6 21:19:48 binux kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0 Sep 6 21:19:48 binux kernel: PNP: PS/2 Controller [PNP0303:C210,PNP0f13:C211] at 0x60,0x64 irq 1,12 Sep 6 21:19:48 binux kernel: i8042.c: Detected active multiplexing controller, rev 1.1. Sep 6 21:19:48 binux kernel: serio: i8042 AUX0 port at 0x60,0x64 irq 12 Sep 6 21:19:48 binux kernel: serio: i8042 AUX1 port at 0x60,0x64 irq 12 Sep 6 21:19:48 binux kernel: serio: i8042 AUX2 port at 0x60,0x64 irq 12 Sep 6 21:19:48 binux kernel: serio: i8042 AUX3 port at 0x60,0x64 irq 12 Sep 6 21:19:48 binux kernel: serio: i8042 KBD port at 0x60,0x64 irq 1 Sep 6 21:19:48 binux kernel: mice: PS/2 mouse device common for all mice Sep 6 21:19:48 binux kernel: md: linear personality registered for level -1 Sep 6 21:19:48 binux kernel: md: raid0 personality registered for level 0 Sep 6 21:19:48 binux kernel: md: raid1 personality registered for level 1 Sep 6 21:19:48 binux kernel: md: raid10 personality registered for level 10 Sep 6 21:19:48 binux kernel: input: AT Translated Set 2 keyboard as /class/input/input0 Sep 6 21:19:48 binux kernel: md: multipath personality registered for level -4 Sep 6 21:19:48 binux kernel: md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 Sep 6 21:19:48 binux kernel: md: bitmap version 4.39 Sep 6 21:19:48 binux kernel: device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: [EMAIL PROTECTED] Sep 6 21:19:48 binux kernel: device-mapper: multipath: version 1.0.4 loaded Sep 6 21:19:48 binux kernel: device-mapper: multipath round-robin: version 1.0.0 loaded Sep 6 21:19:48 binux kernel: device-mapper: multipath emc: version 0.0.3 loaded Sep 6 21:19:48 binux kernel: EDAC MC: Ver: 2.0.1 Sep 4 2006 Sep 6 21:19:48 binux kernel: EISA: Probing bus 0 at eisa.0 Sep 6 21:19:48 binux kernel: Cannot allocate resource for EISA slot 1 Sep 6 21:19:48 binux kernel: Cannot allocate resource for EISA slot 2 Sep 6 21:19:48 binux kernel: Cannot allocate resource for EISA slot 3 Sep 6 21:19:48 binux kernel: Cannot allocate resource for EISA slot 4 Sep 6 21:19:48 binux kernel: Cannot allocate resource for EISA slot 5 Sep 6 21:19:48 binux kernel: Cannot allocate resource for EISA slot 6 Sep 6 21:19:48 binux kernel: Cannot allocate resource for EISA slot 7 Sep 6 21:19:48 binux kernel: Cannot allocate resource for EISA slot 8 Sep 6 21:19:48 binux kernel: EISA: Detected 0 cards. Sep 6 21:19:48 binux kernel: NET: Registered protocol family 1 Sep 6 21:19:48 binux kernel: ieee80211: 802.11 data/management/control stack, git-1.1.13 Sep 6 21:19:48 binux kernel: ieee80211: Copyright (C) 2004-2005 Intel Corporation <[EMAIL PROTECTED]> Sep 6 21:19:48 binux kernel: Starting balanced_irq Sep 6 21:19:48 binux kernel: Using IPI No-Shortcut mode Sep 6 21:19:48 binux kernel: ACPI: (supports S0 S3 S4 S5) Sep 6 21:19:48 binux kernel: Time: acpi_pm clocksource has been installed. Sep 6 21:19:48 binux kernel: md: Autodetecting RAID arrays. Sep 6 21:19:48 binux kernel: md: autorun ... Sep 6 21:19:48 binux kernel: md: ... autorun DONE. Sep 6 21:19:48 binux kernel: kjournald starting. Commit interval 5 seconds Sep 6 21:19:48 binux kernel: EXT3-fs: mounted filesystem with ordered data mode. Sep 6 21:19:48 binux kernel: VFS: Mounted root (ext3 filesystem) readonly. Sep 6 21:19:48 binux kernel: Freeing unused kernel memory: 328k freed Sep 6 21:19:48 binux kernel: tg3.c:v3.64 (July 31, 2006) Sep 6 21:19:48 binux kernel: ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 23 (level, low) -> IRQ 225 Sep 6 21:19:48 binux kernel: input: PC Speaker as /class/input/input1 Sep 6 21:19:48 binux kernel: eth0: Tigon3 [partno(BCM95788A50) rev 3003 PHY(5705)] (PCI:33MHz:32-bit) 10/100/1000BaseT Ethernet 00:15:60:c9:7a:54 Sep 6 21:19:48 binux kernel: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[0] TSOcap[1] Sep 6 21:19:48 binux kernel: eth0: dma_rwctrl[763f0000] dma_mask[32-bit] Sep 6 21:19:48 binux kernel: usbcore: registered new driver usbfs Sep 6 21:19:48 binux kernel: usbcore: registered new driver hub Sep 6 21:19:48 binux kernel: Yenta: CardBus bridge found at 0000:02:04.0 [103c:30b0] Sep 6 21:19:48 binux kernel: Yenta: Enabling burst memory read transactions Sep 6 21:19:48 binux kernel: Yenta: Using INTVAL to route CSC interrupts to PCI Sep 6 21:19:48 binux kernel: Yenta: Routing CardBus interrupts to PCI Sep 6 21:19:48 binux kernel: Yenta TI: socket 0000:02:04.0, mfunc 0x01a11002, devctl 0x64 Sep 6 21:19:48 binux kernel: Yenta: ISA IRQ mask 0x0e78, PCI irq 177 Sep 6 21:19:48 binux kernel: Socket status: 30000006 Sep 6 21:19:48 binux kernel: Yenta: Raising subordinate bus# of parent bus (#02) from #03 to #06 Sep 6 21:19:48 binux kernel: pcmcia: parent PCI bridge I/O window: 0x1000 - 0x1fff Sep 6 21:19:48 binux kernel: cs: IO port probe 0x1000-0x1fff: clean. Sep 6 21:19:48 binux kernel: pcmcia: parent PCI bridge Memory window: 0xd4000000 - 0xd42fffff Sep 6 21:19:48 binux kernel: pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x51ffffff Sep 6 21:19:48 binux kernel: sdhci: Secure Digital Host Controller Interface driver, 0.12 Sep 6 21:19:48 binux kernel: sdhci: Copyright(c) Pierre Ossman Sep 6 21:19:48 binux kernel: sdhci: SDHCI controller found at 0000:02:04.3 [104c:803c] (rev 0) Sep 6 21:19:48 binux kernel: ACPI: PCI Interrupt 0000:02:04.3[A] -> GSI 20 (level, low) -> IRQ 177 Sep 6 21:19:48 binux kernel: mmc0: SDHCI at 0xd4019000 irq 177 PIO Sep 6 21:19:48 binux kernel: pnp: Device 00:02 activated. Sep 6 21:19:48 binux kernel: parport: PnPBIOS parport detected. Sep 6 21:19:48 binux kernel: piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device Sep 6 21:19:48 binux kernel: pnp: Device 00:02 disabled. Sep 6 21:19:48 binux kernel: Linux agpgart interface v0.101 (c) Dave Jones Sep 6 21:19:48 binux kernel: ACPI: PCI Interrupt 0000:02:04.1[A] -> GSI 20 (level, low) -> IRQ 177 Sep 6 21:19:48 binux kernel: ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[177] MMIO=[d4011000-d40117ff] Max Packet=[2048] IR/IT contexts=[4/8] Sep 6 21:19:48 binux kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5 Sep 6 21:19:48 binux kernel: shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 Sep 6 21:19:48 binux kernel: ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 233 Sep 6 21:19:48 binux kernel: ehci_hcd 0000:00:13.2: EHCI Host Controller Sep 6 21:19:48 binux kernel: ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1 Sep 6 21:19:48 binux kernel: ehci_hcd 0000:00:13.2: irq 233, io mem 0xd4403000 Sep 6 21:19:48 binux kernel: ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 Sep 6 21:19:48 binux kernel: usb usb1: configuration #1 chosen from 1 choice Sep 6 21:19:48 binux kernel: hub 1-0:1.0: USB hub found Sep 6 21:19:48 binux kernel: hub 1-0:1.0: 8 ports detected Sep 6 21:19:48 binux kernel: tpm_inf_pnp 00:03: Found C1FF with ID IFX0102 Sep 6 21:19:48 binux kernel: tpm_inf_pnp 00:03: TPM found: config base 0x520, io base 0x530, chip version 0x000b, vendor id 0x15d1 (Infineon), product id 0x000b (SLB 9635 TT 1.2) Sep 6 21:19:48 binux kernel: bcm43xx driver Sep 6 21:19:48 binux kernel: ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 233 Sep 6 21:19:48 binux kernel: ohci_hcd 0000:00:13.0: OHCI Host Controller Sep 6 21:19:48 binux kernel: ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2 Sep 6 21:19:48 binux kernel: ohci_hcd 0000:00:13.0: irq 233, io mem 0xd4401000 Sep 6 21:19:48 binux kernel: cs: IO port probe 0x100-0x4ff: clean. Sep 6 21:19:48 binux kernel: cs: IO port probe 0xc00-0xcff: excluding 0xc00-0xc07 0xc10-0xc17 0xc50-0xc57 0xc68-0xc6f 0xcd0-0xcdf 0xcf8-0xcff Sep 6 21:19:48 binux kernel: cs: IO port probe 0x3000-0x7fff:<3>synaptics reset failed Sep 6 21:19:48 binux kernel: clean. Sep 6 21:19:48 binux kernel: cs: IO port probe 0xa00-0xaff: clean. Sep 6 21:19:48 binux kernel: usb usb2: configuration #1 chosen from 1 choice Sep 6 21:19:48 binux kernel: hub 2-0:1.0: USB hub found Sep 6 21:19:48 binux kernel: hub 2-0:1.0: 4 ports detected Sep 6 21:19:48 binux kernel: ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 233 Sep 6 21:19:48 binux kernel: ohci_hcd 0000:00:13.1: OHCI Host Controller Sep 6 21:19:48 binux kernel: ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3 Sep 6 21:19:48 binux kernel: Synaptics Touchpad, model: 1, fw: 6.2, id: 0x25a0b1, caps: 0xa04793/0x300000 Sep 6 21:19:48 binux kernel: serio: Synaptics pass-through port at isa0060/serio4/input0 Sep 6 21:19:48 binux kernel: input: SynPS/2 Synaptics TouchPad as /class/input/input2 Sep 6 21:19:48 binux kernel: ohci_hcd 0000:00:13.1: irq 233, io mem 0xd4402000 Sep 6 21:19:48 binux kernel: ts: Compaq touchscreen protocol output Sep 6 21:19:48 binux kernel: usb usb3: configuration #1 chosen from 1 choice Sep 6 21:19:48 binux kernel: hub 3-0:1.0: USB hub found Sep 6 21:19:48 binux kernel: hub 3-0:1.0: 4 ports detected Sep 6 21:19:48 binux kernel: ACPI: PCI Interrupt 0000:30:00.0[A] -> GSI 18 (level, low) -> IRQ 50 Sep 6 21:19:48 binux kernel: f8d08123 Sep 6 21:19:48 binux kernel: Modules linked in: tsdev bcm43xx psmouse ohci_hcd tpm_infineon tpm ehci_hcd shpchp pci_hotplug ssb pcmcia ohci1394 ati_agp agpgart i2c_piix4 parport_pc parport evdev serio_raw ieee80211softmac ieee1394 sdhci mmc_core tpm_bios yenta_socket usbcore pcspkr tg3 rsrc_nonstatic pcmcia_core Sep 6 21:19:48 binux kernel: EIP: 0060:[<f8d08123>] Not tainted VLI Sep 6 21:19:48 binux kernel: EFLAGS: 00010246 (2.6.18-rc4 #2) Sep 6 21:19:48 binux kernel: [<f8cf3686>] bcm43xx_chipset_detach+0x26/0x30 [bcm43xx] Sep 6 21:19:48 binux kernel: [<f8cf6e57>] bcm43xx_init_one+0x517/0x11c0 [bcm43xx] Sep 6 21:19:48 binux kernel: [<f8cf6100>] bcm43xx_ssb_resume+0x0/0x20 [bcm43xx] Sep 6 21:19:48 binux kernel: [<c0124301>] __mmdrop+0x31/0x40 Sep 6 21:19:48 binux kernel: [<c03e5727>] schedule+0x577/0xac0 Sep 6 21:19:48 binux kernel: [<c03e5d71>] preempt_schedule+0x41/0x70 Sep 6 21:19:48 binux kernel: [<c0112e11>] smp_call_function_interrupt+0x41/0x60 Sep 6 21:19:48 binux kernel: [<c025dcce>] pci_match_device+0x1e/0xe0 Sep 6 21:19:48 binux kernel: [<c02b54bb>] get_device+0x1b/0x30 Sep 6 21:19:48 binux kernel: [<c025de24>] pci_device_probe+0x64/0x80 Sep 6 21:19:48 binux kernel: [<c02b76cc>] driver_probe_device+0x4c/0xd0 Sep 6 21:19:48 binux kernel: [<c02b77d0>] __driver_attach+0x0/0x80 Sep 6 21:19:48 binux kernel: [<c02b7841>] __driver_attach+0x71/0x80 Sep 6 21:19:48 binux kernel: [<c02b6fad>] bus_for_each_dev+0x5d/0x80 Sep 6 21:19:48 binux kernel: [<c02b75e6>] driver_attach+0x26/0x30 Sep 6 21:19:48 binux kernel: [<c02b77d0>] __driver_attach+0x0/0x80 Sep 6 21:19:48 binux kernel: [<c02b6b40>] bus_add_driver+0x90/0x160 Sep 6 21:19:48 binux kernel: [<c02b7a8e>] driver_register+0x5e/0xa0 Sep 6 21:19:48 binux kernel: [<c025dfe4>] __pci_register_driver+0x64/0x90 Sep 6 21:19:48 binux kernel: [<f881a028>] bcm43xx_init+0x28/0x2c [bcm43xx] Sep 6 21:19:48 binux kernel: [<c0145a24>] sys_init_module+0x184/0x1c80 Sep 6 21:19:48 binux kernel: [<c010719a>] timer_interrupt+0x6a/0xa0 Sep 6 21:19:48 binux kernel: [<c0103363>] syscall_call+0x7/0xb Sep 6 21:19:48 binux kernel: <6>usb 1-8: new high speed USB device using ehci_hcd and address 5 Sep 6 21:19:48 binux kernel: usb 1-8: configuration #1 chosen from 1 choice Sep 6 21:19:48 binux kernel: hub 1-8:1.0: USB hub found Sep 6 21:19:48 binux kernel: hub 1-8:1.0: 4 ports detected Sep 6 21:19:48 binux kernel: usb 2-2: new full speed USB device using ohci_hcd and address 2 Sep 6 21:19:48 binux kernel: Adding 1045128k swap on /dev/sda6. Priority:-1 extents:1 across:1045128k Sep 6 21:19:48 binux kernel: usb 2-2: configuration #1 chosen from 1 choice Sep 6 21:19:48 binux kernel: Bluetooth: Core ver 2.10 Sep 6 21:19:48 binux kernel: NET: Registered protocol family 31 Sep 6 21:19:48 binux kernel: Bluetooth: HCI device and connection manager initialized Sep 6 21:19:48 binux kernel: Bluetooth: HCI socket layer initialized Sep 6 21:19:48 binux kernel: Bluetooth: HCI USB driver ver 2.9 Sep 6 21:19:48 binux kernel: EXT3 FS on sda5, internal journal Sep 6 21:19:48 binux kernel: usb 3-1: new full speed USB device using ohci_hcd and address 2 Sep 6 21:19:48 binux kernel: usb 3-1: configuration #1 chosen from 1 choice Sep 6 21:19:48 binux kernel: usb 3-3: new full speed USB device using ohci_hcd and address 3 Sep 6 21:19:48 binux kernel: usb 3-3: configuration #1 chosen from 1 choice Sep 6 21:19:48 binux kernel: usb 1-8.1: new low speed USB device using ehci_hcd and address 7 Sep 6 21:19:48 binux kernel: usb 1-8.1: configuration #1 chosen from 1 choice Sep 6 21:19:48 binux kernel: Bluetooth: L2CAP ver 2.8 Sep 6 21:19:48 binux kernel: Bluetooth: L2CAP socket layer initialized Sep 6 21:19:48 binux kernel: usb 1-8.2: new full speed USB device using ehci_hcd and address 8 Sep 6 21:19:48 binux kernel: Bluetooth: RFCOMM socket layer initialized Sep 6 21:19:48 binux kernel: Bluetooth: RFCOMM TTY layer initialized Sep 6 21:19:48 binux kernel: Bluetooth: RFCOMM ver 1.8 Sep 6 21:19:48 binux kernel: usb 1-8.2: configuration #1 chosen from 1 choice Sep 6 21:19:48 binux kernel: usbcore: registered new driver hci_usb Sep 6 21:19:48 binux kernel: usbcore: registered new driver hiddev Sep 6 21:19:48 binux kernel: input: Microsoft Microsoft Wheel Mouse Optical® as /class/input/input3 Sep 6 21:19:48 binux kernel: input: USB HID v1.00 Mouse [Microsoft Microsoft Wheel Mouse Optical®] on usb-0000:00:13.2-8.1 Sep 6 21:19:48 binux kernel: usbcore: registered new driver usbhid Sep 6 21:19:48 binux kernel: drivers/usb/input/hid-core.c: v2.6:USB HID core driver Sep 6 21:19:48 binux kernel: drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 8 if 0 alt 0 proto 2 vid 0x03F0 pid 0x3A02 Sep 6 21:19:48 binux kernel: usbcore: registered new driver usblp Sep 6 21:19:48 binux kernel: drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver Sep 6 21:19:48 binux kernel: ACPI: Processor [C000] (supports 8 throttling states) Sep 6 21:19:48 binux kernel: ACPI: Processor [C001] (supports 8 throttling states) Sep 6 21:19:48 binux kernel: powernow-k8: Found 2 AMD Turion(tm) 64 X2 Mobile Technology TL-52 processors (version 2.00.00) Sep 6 21:19:48 binux kernel: powernow-k8: 0 : fid 0x8 (1600 MHz), vid 0x13 Sep 6 21:19:48 binux kernel: powernow-k8: 1 : fid 0x0 (800 MHz), vid 0x1e Sep 6 21:19:48 binux kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled Sep 6 21:19:48 binux kernel: Capability LSM initialized Sep 6 21:19:48 binux kernel: NET: Registered protocol family 17 Sep 6 21:19:48 binux kernel: lp: driver loaded but no devices found Sep 6 21:19:48 binux kernel: ACPI: AC Adapter [C1BC] (on-line) Sep 6 21:19:49 binux kernel: ACPI: Battery Slot [C1BE] (battery present) Sep 6 21:19:49 binux kernel: ACPI: Battery Slot [C1BD] (battery absent) Sep 6 21:19:49 binux kernel: ACPI: Power Button (FF) [PWRF] Sep 6 21:19:49 binux kernel: ACPI: Sleep Button (CM) [C256] Sep 6 21:19:49 binux kernel: ACPI: Lid Switch [C257] Sep 6 21:19:50 binux kernel: ACPI: Transitioning device [C348] to D3 Sep 6 21:19:50 binux kernel: ACPI: Transitioning device [C348] to D3 Sep 6 21:19:50 binux kernel: ACPI: Fan [C348] (off) Sep 6 21:19:50 binux kernel: ACPI: Transitioning device [C349] to D3 Sep 6 21:19:50 binux kernel: ACPI: Transitioning device [C349] to D3 Sep 6 21:19:50 binux kernel: ACPI: Fan [C349] (off) Sep 6 21:19:50 binux kernel: ACPI: Transitioning device [C34A] to D3 Sep 6 21:19:50 binux kernel: ACPI: Transitioning device [C34A] to D3 Sep 6 21:19:50 binux kernel: ACPI: Fan [C34A] (off) Sep 6 21:19:50 binux kernel: ACPI: Transitioning device [C34B] to D3 Sep 6 21:19:50 binux kernel: ACPI: Transitioning device [C34B] to D3 Sep 6 21:19:50 binux kernel: ACPI: Fan [C34B] (off) Sep 6 21:19:50 binux kernel: ACPI: Thermal Zone [TZ1] (59 C) Sep 6 21:19:50 binux kernel: ACPI: Thermal Zone [TZ2] (49 C) Sep 6 21:19:50 binux kernel: ACPI: Thermal Zone [TZ3] (28 C) Sep 6 21:19:50 binux kernel: ACPI: Video Device [C076] (multi-head: yes rom: no post: no) Sep 6 21:19:54 binux hpiod: 1.6.7 accepting connections at 2208... Sep 6 21:19:56 binux ptal-mlcd: SYSLOG at ExMgr.cpp:652, dev=<mlc:usb:photosmart_7150>, pid=2680, e=2, t=1157570396 ptal-mlcd successfully initialized. Sep 6 21:19:56 binux ptal-printd: ptal-printd(mlc:usb:photosmart_7150) successfully initialized using /var/run/ptal-printd/mlc_usb_photosmart_7150*. Sep 6 21:20:01 binux kernel: [drm] Initialized drm 1.0.1 20051102 Sep 6 21:20:27 binux gconfd (bini-3079): (Version 2.14.0) wird gestartet, Prozesskennung 3079, Benutzer »bini«
pgp3RXndOPaU0.pgp
Description: PGP signature
_______________________________________________ Bcm43xx-dev mailing list [email protected] https://lists.berlios.de/mailman/listinfo/bcm43xx-dev
