-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 i testing traffic now i try nmap 192.168.1.0/24 (to scan my network ) and the device is die if i try to unload the bcm43xx module, i have a deadlook (cant shutdown, only hardware reset)
SoftMAC: Start scanning with channel: 1 SoftMAC: Scanning 14 channels SoftMAC: Scanning finished SoftMAC: Associate: Scanning for networks first. SoftMAC: Start scanning with channel: 1 SoftMAC: Scanning 14 channels SoftMAC: Scanning finished SoftMAC: Queueing Authentication Request to 00:0e:2e:64:77:fd SoftMAC: Cannot associate without being authenticated, requested authentication SoftMAC: Sent Authentication Request to 00:0e:2e:64:77:fd. SoftMAC: Open Authentication completed with 00:0e:2e:64:77:fd SoftMAC: sent association request! SoftMAC: associated! bcm43xx: Radio turned off bcm43xx: DMA-32 0x0200 (RX) max used slots: 1/64 bcm43xx: DMA-32 0x02A0 (TX) max used slots: 0/512 bcm43xx: DMA-32 0x0280 (TX) max used slots: 0/512 bcm43xx: DMA-32 0x0260 (TX) max used slots: 0/512 bcm43xx: DMA-32 0x0240 (TX) max used slots: 0/512 bcm43xx: DMA-32 0x0220 (TX) max used slots: 2/512 bcm43xx: DMA-32 0x0200 (TX) max used slots: 0/512 bcm43xx: Microcode rev 0x127, pl 0xe (2005-04-18 02:36:27) bcm43xx: Radio turned on bcm43xx: Radio enabled by hardware bcm43xx: Chip initialized bcm43xx: 32-bit DMA initialized bcm43xx: Keys cleared bcm43xx: Selected 802.11 core (phytype 2) bcm43xx: Radio turned off bcm43xx: DMA-32 0x0200 (RX) max used slots: 1/64 bcm43xx: DMA-32 0x02A0 (TX) max used slots: 0/512 bcm43xx: DMA-32 0x0280 (TX) max used slots: 0/512 bcm43xx: DMA-32 0x0260 (TX) max used slots: 0/512 bcm43xx: DMA-32 0x0240 (TX) max used slots: 0/512 bcm43xx: DMA-32 0x0220 (TX) max used slots: 1/512 bcm43xx: DMA-32 0x0200 (TX) max used slots: 0/512 bcm43xx: Microcode rev 0x127, pl 0xe (2005-04-18 02:36:27) bcm43xx: Radio turned on bcm43xx: Radio enabled by hardware bcm43xx: Chip initialized bcm43xx: 32-bit DMA initialized bcm43xx: Keys cleared bcm43xx: Selected 802.11 core (phytype 2) SoftMAC: Canceling existing associate request! SoftMAC: Associate: Scanning for networks first. SoftMAC: Start scanning with channel: 1 SoftMAC: Scanning 14 channels SoftMAC: Scanning finished SoftMAC: Queueing Authentication Request to 00:0e:2e:64:77:fd SoftMAC: Cannot associate without being authenticated, requested authentication SoftMAC: Sent Authentication Request to 00:0e:2e:64:77:fd. SoftMAC: Open Authentication completed with 00:0e:2e:64:77:fd SoftMAC: sent association request! SoftMAC: associated! SoftMAC: Start scanning with channel: 1 SoftMAC: Scanning 14 channels SoftMAC: Scanning finished SoftMAC: Already associating or associated to 00:0e:2e:64:77:fd bcm43xx: Radio turned off bcm43xx: DMA-32 0x0200 (RX) max used slots: 1/64 bcm43xx: DMA-32 0x02A0 (TX) max used slots: 0/512 bcm43xx: DMA-32 0x0280 (TX) max used slots: 0/512 bcm43xx: DMA-32 0x0260 (TX) max used slots: 0/512 bcm43xx: DMA-32 0x0240 (TX) max used slots: 0/512 bcm43xx: DMA-32 0x0220 (TX) max used slots: 2/512 bcm43xx: DMA-32 0x0200 (TX) max used slots: 0/512 bcm43xx: Microcode rev 0x127, pl 0xe (2005-04-18 02:36:27) bcm43xx: Radio turned on bcm43xx: Radio enabled by hardware bcm43xx: Chip initialized bcm43xx: 32-bit DMA initialized bcm43xx: Keys cleared bcm43xx: Selected 802.11 core (phytype 2) bcm43xx: Radio turned off bcm43xx: DMA-32 0x0200 (RX) max used slots: 1/64 bcm43xx: DMA-32 0x02A0 (TX) max used slots: 0/512 bcm43xx: DMA-32 0x0280 (TX) max used slots: 0/512 bcm43xx: DMA-32 0x0260 (TX) max used slots: 0/512 bcm43xx: DMA-32 0x0240 (TX) max used slots: 0/512 bcm43xx: DMA-32 0x0220 (TX) max used slots: 1/512 bcm43xx: DMA-32 0x0200 (TX) max used slots: 0/512 ACPI: PCI interrupt for device 0000:10:00.0 disabled bcm43xx driver ACPI: PCI Interrupt 0000:10:00.0[A] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:10:00.0 to 64 bcm43xx: Chip ID 0x4311, rev 0x1 bcm43xx: Number of cores: 4 bcm43xx: Core 0: ID 0x800, rev 0x11, vendor 0x4243, enabled bcm43xx: Core 1: ID 0x812, rev 0xa, vendor 0x4243, enabled bcm43xx: Core 2: ID 0x817, rev 0x3, vendor 0x4243, disabled bcm43xx: Core 3: ID 0x820, rev 0x1, vendor 0x4243, enabled bcm43xx: PHY connected bcm43xx: Detected PHY: Version: 4, Type 2, Revision 8 bcm43xx: Detected Radio: ID: 2205017f (Manuf: 17f Ver: 2050 Rev: 2) bcm43xx: Radio turned off bcm43xx: Radio turned off bcm43xx: PHY connected bcm43xx: Microcode rev 0x127, pl 0xe (2005-04-18 02:36:27) bcm43xx: Radio turned on bcm43xx: Radio disabled by hardware bcm43xx: Chip initialized bcm43xx: 32-bit DMA initialized bcm43xx: Keys cleared bcm43xx: Selected 802.11 core (phytype 2) bcm43xx: Radio hardware status changed to enabled SoftMAC: Associate: Scanning for networks first. SoftMAC: Start scanning with channel: 1 SoftMAC: Scanning 14 channels SoftMAC: Scanning finished SoftMAC: Queueing Authentication Request to 00:0e:2e:64:77:fd SoftMAC: Cannot associate without being authenticated, requested authentication SoftMAC: Sent Authentication Request to 00:0e:2e:64:77:fd. SoftMAC: Open Authentication completed with 00:0e:2e:64:77:fd SoftMAC: sent association request! SoftMAC: associated! NETDEV WATCHDOG: eth1: transmit timed out bcm43xx: Controller RESET (TX timeout) ... bcm43xx: select_wireless_core: cleanup bcm43xx: Radio turned off bcm43xx: DMA-32 0x0200 (RX) max used slots: 1/64 bcm43xx: DMA-32 0x02A0 (TX) max used slots: 0/512 bcm43xx: DMA-32 0x0280 (TX) max used slots: 0/512 bcm43xx: DMA-32 0x0260 (TX) max used slots: 0/512 bcm43xx: DMA-32 0x0240 (TX) max used slots: 0/512 bcm43xx: DMA-32 0x0220 (TX) max used slots: 411/512 bcm43xx: DMA-32 0x0200 (TX) max used slots: 0/512 bcm43xx: IRQ_READY timeout bcm43xx: core_up for active 802.11 core failed (-19) bcm43xx: Controller restart failed NETDEV WATCHDOG: eth1: transmit timed out NETDEV WATCHDOG: eth1: transmit timed out NETDEV WATCHDOG: eth1: transmit timed out NETDEV WATCHDOG: eth1: transmit timed out NETDEV WATCHDOG: eth1: transmit timed out NETDEV WATCHDOG: eth1: transmit timed out NETDEV WATCHDOG: eth1: transmit timed out NETDEV WATCHDOG: eth1: transmit timed out NETDEV WATCHDOG: eth1: transmit timed out NETDEV WATCHDOG: eth1: transmit timed out NETDEV WATCHDOG: eth1: transmit timed out NETDEV WATCHDOG: eth1: transmit timed out NETDEV WATCHDOG: eth1: transmit timed out -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.6 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFFq489z8H9Vs7bTsMRAtDIAKCwdn5Tbwt+mLSCSmcVYqedgwkoyQCgx4LY h3jDY81/gfRyoJdh7psjG/w= =FOVu -----END PGP SIGNATURE----- _______________________________________________ Bcm43xx-dev mailing list [email protected] https://lists.berlios.de/mailman/listinfo/bcm43xx-dev
