Igor Korot wrote: > Hi, Larry, > I found another strange thing with the driver. > I was able to successfully establish the connection using "wireless tools". > I just installed wpa_supplicant", and here is what happened: > > IgorsGentooOnNetwork igor # ifconfig eth1 up > SIOCSIFFLAGS: Protocol error > > > Looking at dmesg, I found that the problem is in the firmware: > > bcm43xx: PHY connected > bcm43xx: Microcode rev 0x127, pl 0xe (2005-04-18 02:36:27) > bcm43xx: InitVals (bcm43xx_initvalXX.fw) file-format error. Please fix your > bcm43xx firmware files. > bcm43xx: core_up for active 802.11 core failed (-71) > > > Here is my /etc/conf.d/net > > # This blank configuration will automatically use DHCP for any net.* > # scripts in /etc/init.d. To create a more complete configuration, > # please review /etc/conf.d/net.example and save your configuration > # in /etc/conf.d/net (this file :]!). > > #Wireless-tools > #nis_domain_lo="IgorsGentoo" > #modules=("iwconfig") > #key_ESSID1="[1] s:IgorsNetwork key [1] enc open" > #key_ESSID2="[1] aaaa-bbbb-cccc-dd key [1] enc estricted" > #preferred_aps=("ESSID1" "ESSID2") > > #Wpa_supplicant > modules=( "wpa_supplicant" ) > wpa_supplicant_eth1="-Dbcm43xx" > > Here is my /etc/wpa_supplicant.conf > > ctrl_interface=/var/run/wpa_supplicant > ctrl_interface_group=0 > ap_scan=1 > network={ > ssid="IgorsNetwork" > psk="abcdef" > priority=5 > } > > Do I need to re-install the firmware going from wireless tools to > wpa_supplicant?
No. Changing the connection tools did not cause this problem. Your firmware got corrupted by some event, which is the reason you need to re-install the firmware. In any case, the log message is clear. Larry _______________________________________________ Bcm43xx-dev mailing list Bcm43xx-dev@lists.berlios.de https://lists.berlios.de/mailman/listinfo/bcm43xx-dev