On Tuesday, 6 February 2007 23:18, Pavel Roskin wrote: > On Tue, 2007-02-06 at 14:34 -0600, Larry Finger wrote: > > I have really _GOOD_ news!!!!! While reviewing the latest changes in the V4 > > specs, I found an > > interchange of the PHY version and PHY revision fields, relative to the > > current V3 specs. Of the > > three cards that I have, the 4306 had the same value for the PHY version > > and revision. In addition, > > it was the only card of the 3 thaw would work at 11Mbs. A light went on! > > > > After installing the patch listed below, both my 4318 and my 4311 will now > > run at 11Mbs. From tests > > with iperf, I now get rates of 6.1 - 6.5 Mbs from all three. > > I'm getting a sustained 1.7 megabytes per second over FTP with 4312 > (PCIe card in Dell Latitude). The connection to a 802.11g AP was > established instantaneously. > > I have never had much success with the softmac driver at all. Now it's > working better than the d80211 driver, with waits for minutes before it > starts talking to the same 802.11g AP. > > I think it's a 2.6.20.1 material, considering its gain/changes ratio. > I'm actually going to compile this kernel without debug and keep it as a > "production" kernel. > > Congratulations and many many thanks!
I can confirm the driver works great with the patch! Many thanks, Larry! Greetings, Rafael _______________________________________________ Bcm43xx-dev mailing list [email protected] https://lists.berlios.de/mailman/listinfo/bcm43xx-dev
