El Lunes, 5 de Marzo de 2007 23:09, Aleksander Trofimowicz escribió: > Hello, > > Currently I'm testing a recent kernel from the mainline tree (head at > 20b0f65d35ae45d43f363ace3744a775a752d265). Good news is that the > bcm43xx driver works on nx6325 . And works quite well. Though I tested > it in managed mode only. Wpa_supplicant was able to negotiate with an > AP using WPA-PSK, WPA2-PSK as well as no data encryption. I haven't > noticed any data-link errors nor transfer limits so far (non-local > access beyond 180kB/s). > However, I had to set everything related to network layer manually, > because all dhcp transactions ended up more less like that:
i have another problem with the dhcp client on debian testing uppon the ip is leassed to the device, its seems to reset and dissasociated from the wireless network if i set iwconfig eth1 essid my_essid , i have connection again i had to this manually too. --------------- bcm43xx: PHY connected bcm43xx: Microcode rev 0x127, pl 0xe (2005-04-18 02:36:27) bcm43xx: Radio turned on bcm43xx: Radio enabled by hardware bcm43xx: Chip initialized bcm43xx: 32-bit DMA initialized bcm43xx: Keys cleared bcm43xx: Selected 802.11 core (phytype 2) SoftMAC: Scanning finished: scanned 14 channels starting with channel 1 bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt = 0 SoftMAC: Associate: Scanning for networks first. SoftMAC: Scanning finished: scanned 14 channels starting with channel 1 SoftMAC: Queueing Authentication Request to 00:80:c8:ac:aa:06 SoftMAC: Cannot associate without being authenticated, requested authentication SoftMAC: Sent Authentication Request to 00:80:c8:ac:aa:06. SoftMAC: Sent Authentication Request to 00:80:c8:ac:aa:06. SoftMAC: Open Authentication completed with 00:80:c8:ac:aa:06 SoftMAC: sent association request! SoftMAC: associated! bcm43xx: Radio turned off <<<<<<<<<=== here dhcp got ip bcm43xx: DMA-32 0x0200 (RX) max used slots: 1/64 bcm43xx: DMA-32 0x02A0 (TX) max used slots: 0/512 bcm43xx: DMA-32 0x0280 (TX) max used slots: 0/512 bcm43xx: DMA-32 0x0260 (TX) max used slots: 0/512 bcm43xx: DMA-32 0x0240 (TX) max used slots: 0/512 bcm43xx: DMA-32 0x0220 (TX) max used slots: 8/512 bcm43xx: DMA-32 0x0200 (TX) max used slots: 0/512 bcm43xx: Microcode rev 0x127, pl 0xe (2005-04-18 02:36:27) bcm43xx: Radio turned on bcm43xx: Radio enabled by hardware bcm43xx: Chip initialized bcm43xx: 32-bit DMA initialized bcm43xx: Keys cleared bcm43xx: Selected 802.11 core (phytype 2) SoftMAC: Canceling existing associate request! <<<<<<=== here i had a iwconfig a set again the essid SoftMAC: Associate: Scanning for networks first. SoftMAC: Scanning finished: scanned 14 channels starting with channel 1 SoftMAC: Queueing Authentication Request to 00:80:c8:ac:aa:06 SoftMAC: Cannot associate without being authenticated, requested authentication SoftMAC: Sent Authentication Request to 00:80:c8:ac:aa:06. SoftMAC: Sent Authentication Request to 00:80:c8:ac:aa:06. SoftMAC: Open Authentication completed with 00:80:c8:ac:aa:06 SoftMAC: sent association request! SoftMAC: associated! <<<<<<<<<<<<= here i have normal connection i use 2.6.20 + combined path from larry Dock Sud BBS http://www.docksud.com.ar telnet://bbs.docksud.com.ar
pgpeJS59BWoDn.pgp
Description: PGP signature
_______________________________________________ Bcm43xx-dev mailing list [email protected] https://lists.berlios.de/mailman/listinfo/bcm43xx-dev
