There are several places where the PHY version and revision were interchanged.
These are changed in the specifications on 2/13/07 and now use "analog" instead
instead of "version" to help reduce confusion.

Signed-off-by: Larry Finger <[EMAIL PROTECTED]>
---

John,

I had thought this patch was submitted earlier, but apparently I failed
to send it. This material is needed for wireless-2.6, "upstream"
and "upstream-fixes".

Thanks,

Larry


Index: wireless-2.6/drivers/net/wireless/bcm43xx/bcm43xx_radio.c
===================================================================
--- wireless-2.6.orig/drivers/net/wireless/bcm43xx/bcm43xx_radio.c
+++ wireless-2.6/drivers/net/wireless/bcm43xx/bcm43xx_radio.c
@@ -458,7 +458,7 @@ static void bcm43xx_calc_nrssi_offset(st
                bcm43xx_phy_write(bcm, 0x005A, 0x0480);
                bcm43xx_phy_write(bcm, 0x0059, 0x0810);
                bcm43xx_phy_write(bcm, 0x0058, 0x000D);
-               if (phy->rev == 0) {
+               if (phy->analog == 0) {
                        bcm43xx_phy_write(bcm, 0x0003, 0x0122);
                } else {
                        bcm43xx_phy_write(bcm, 0x000A,
@@ -570,9 +570,9 @@ void bcm43xx_calc_nrssi_slope(struct bcm
                nrssi0 = (s16)bcm43xx_phy_read(bcm, 0x0027);
                bcm43xx_radio_write16(bcm, 0x007A,
                                      bcm43xx_radio_read16(bcm, 0x007A) & 
0x007F);
-               if (phy->rev >= 2) {
+               if (phy->analog >= 2) {
                        bcm43xx_write16(bcm, 0x03E6, 0x0040);
-               } else if (phy->rev == 0) {
+               } else if (phy->analog == 0) {
                        bcm43xx_write16(bcm, 0x03E6, 0x0122);
                } else {
                        bcm43xx_write16(bcm, BCM43xx_MMIO_CHANNEL_EXT,
@@ -596,7 +596,7 @@ void bcm43xx_calc_nrssi_slope(struct bcm
                bcm43xx_phy_write(bcm, 0x0015, backup[5]);
                bcm43xx_phy_write(bcm, 0x002A, backup[6]);
                bcm43xx_synth_pu_workaround(bcm, radio->channel);
-               if (phy->rev != 0)
+               if (phy->analog != 0)
                        bcm43xx_write16(bcm, 0x03F4, backup[13]);
 
                bcm43xx_phy_write(bcm, 0x0020, backup[7]);
@@ -692,7 +692,7 @@ void bcm43xx_calc_nrssi_slope(struct bcm
 
                bcm43xx_radio_write16(bcm, 0x007A,
                                      bcm43xx_radio_read16(bcm, 0x007A) & 
0x007F);
-               if (phy->rev >= 2) {
+               if (phy->analog >= 2) {
                        bcm43xx_phy_write(bcm, 0x0003,
                                          (bcm43xx_phy_read(bcm, 0x0003)
                                           & 0xFF9F) | 0x0040);

---

_______________________________________________
Bcm43xx-dev mailing list
[email protected]
https://lists.berlios.de/mailman/listinfo/bcm43xx-dev

Reply via email to