hi all i test my bcm4311 from my HP nx7400 with the wireless-dev git tree (mac80211) and want to report some things: i found that the speed is very similar to the old softmac driver (Good!) networkmanager just connect on firstime (Good!)
[EMAIL PROTECTED]:~$ dmesg |grep bcm bcm43xx_mac80211: Broadcom 4311 WLAN found bcm43xx_mac80211: Found PHY: Analog 4, Type 2, Revision 8 bcm43xx_mac80211: Found Radio: Manuf 0x17F, Version 0x2050, Revision 2 bcm43xx_mac80211: Radio turned off bcm43xx_mac80211: Adding Interface type 2 bcm43xx_mac80211: Loading firmware version 319.102 (2005-10-15 22:46:19) bcm43xx_mac80211: Radio turned on bcm43xx_mac80211: Radio enabled by hardware bcm43xx_mac80211: !WARNING! Idle-TSSI phy->cur_idle_tssi measuring failed. (cur=26, tgt=62). Disabling TX power adjustment. bcm43xx_mac80211: Chip initialized bcm43xx_mac80211: 32-bit DMA initialized bcm43xx_mac80211: Wireless interface started i see above one warning that i dont know what mean . my interface was change from eth1 to wlan0 -- Dock Sud BBS http://www.docksud.com.ar telnet://bbs.docksud.com.ar
pgpjbl6T8ID9i.pgp
Description: PGP signature
_______________________________________________ Bcm43xx-dev mailing list [email protected] https://lists.berlios.de/mailman/listinfo/bcm43xx-dev
