Hello,
I'm trying to use bcm43xx_mac80211 module from wireless-dev git
(checked out today). Unfortunately I've some problems. The device is
not recognized. I cannot "ifconfig ethx up" for example.
>From dmesg:
[...]
ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x04, vendor 0x4243)
ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x05, vendor 0x4243)
ssb: Core 2 found: PCMCIA (cc 0x80D, rev 0x02, vendor 0x4243)
ssb: Core 3 found: V90 (cc 0x807, rev 0x02, vendor 0x4243)
ssb: Core 4 found: PCI (cc 0x804, rev 0x09, vendor 0x4243)
ssb: Switching to ChipCommon core, index 0
ssb: Switching to PCI core, index 4
ssb: Sonics Silicon Backplane found on PCI device 0000:02:03.0
bcm43xx_mac80211: Broadcom 4306 WLAN found
ssb: Switching to IEEE 802.11 core, index 1
bcm43xx_mac80211: Found PHY: Analog 2, Type 2, Revision 2
bcm43xx_mac80211: Found Radio: Manuf 0x17F, Version 0x2050, Revision 2
bcm43xx_mac80211: Radio turned off
wmaster0: Failed to select rate control algorithm
wmaster0: Failed to initialize rate control algorithm
bcm43xx_mac80211: probe of ssb0:0 failed with error -2
$ lsmod
Module Size Used by
snd_pcm_oss 32160 0
snd_mixer_oss 12928 2 snd_pcm_oss
snd_seq_oss 24960 0
snd_seq_device 5384 1 snd_seq_oss
snd_seq_midi_event 5504 1 snd_seq_oss
snd_seq 37168 4 snd_seq_oss,snd_seq_midi_event
nvidia 4539476 12
bcm43xx_mac80211 382688 0
mac80211 114692 1 bcm43xx_mac80211
cfg80211 12936 1 mac80211
snd_intel8x0 26140 1
snd_ac97_codec 87456 1 snd_intel8x0
ac97_bus 2048 1 snd_ac97_codec
snd_pcm 52232 3 snd_pcm_oss,snd_intel8x0,snd_ac97_codec
snd_timer 15364 2 snd_seq,snd_pcm
snd_page_alloc 7176 2 snd_intel8x0,snd_pcm
$ uname -a
Linux dell 2.6.22-rc3-gcfb44989 #3 Wed May 30 21:45:33 CEST 2007 i686
Intel(R) Pentium(R) 4 Mobile CPU 1.60GHz GenuineIntel GNU/Linux
$ lspci -vvv
[...]
02:03.0 Network controller: Broadcom Corporation BCM4306 802.11b/g
Wireless LAN Controller (rev 03) Subsystem: Broadcom Corporation
Unknown device 0453 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV-
VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF-
FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 Interrupt: pin A routed to IRQ 11
Region 0: Memory at f8ffc000 (32-bit, non-prefetchable)
[size=8K]
Regards,
Markus Rothe
_______________________________________________
Bcm43xx-dev mailing list
[email protected]
https://lists.berlios.de/mailman/listinfo/bcm43xx-dev
