Thanks for the quick response! Larry Finger schrieb: > Jan Kohnert wrote: > > But the bcm43xx module does not load any firmware and the card is not > > correctly set up. > > There is no difference between the firmware in a 32- or 64-bit driver. The > difference only matters when the original Windows or OS X driver is being > used, as with ndiswrapper. There are, however, two different versions of > the firmware. V3 is used with the softmac version of bcm43xx, which is the > version you are using, and V4 is used with the mac80211 version. Please > check the output of 'dmesg | grep bcm43xx'. I think it will say that your > firmware is too new. You need to get a copy of a V3 driver and extract its > firmware.
Here is the output, but however, I cannot see, anything would be loaded... kohni-mobil ~ # dmesg | grep bcm43xx bcm43xx driver bcm43xx: Chip ID 0x4311, rev 0x1 bcm43xx: Number of cores: 4 bcm43xx: Core 0: ID 0x800, rev 0x11, vendor 0x4243 bcm43xx: Core 1: ID 0x812, rev 0xa, vendor 0x4243 bcm43xx: Core 2: ID 0x817, rev 0x3, vendor 0x4243 bcm43xx: Core 3: ID 0x820, rev 0x1, vendor 0x4243 bcm43xx: PHY connected bcm43xx: Detected PHY: Analog: 4, Type 2, Revision 8 bcm43xx: Detected Radio: ID: 2205017f (Manuf: 17f Ver: 2050 Rev: 2) bcm43xx: Radio turned off bcm43xx: Radio turned off kohni-mobil ~ # Anyway, I will try to find V3, download, test and report. > Larry -- MfG Jan
pgpSRXBUKkjOY.pgp
Description: PGP signature
_______________________________________________ Bcm43xx-dev mailing list [email protected] https://lists.berlios.de/mailman/listinfo/bcm43xx-dev
